FMAB 1-Phase Line Filters www.schurter.com/pg06_1 AC Filter, Broad Band Attenuation Description -Chassis: Screw-on mounting, from top -Line-filter in standard version, 1‑stage, high attenuation -Very high symmetrical and asymmetrical attenuation loss in the frequency range from 10kHz up to 30MHz Approvals Characteristics -Designed for high current applications -High attenuation at maximum resp. asymmetric load independent from the line impedance -Especially designed for industrial applications such as: Frequency Converters, Stepper Motor Drives, UPS-Systems, Inverters -Qualified for use in equipment according IEC/EN 60950 References -VDE License Number: 40004673 -UL License Number: E72928 General Product Information Weblinks Approvals, RoHS, CHINA-RoHS, Mating Connectors, e-Store, Distributor-Stock-Check, Accessories Technical Data Ratings IEC Ratings UL/CSA Leakage Current Dielectric Strength Allowable Operation Temp. Climatic Category Protection Class Terminal Material: Housing 12 - 30 A @ Ta 40 °C / 250 VAC; 50 Hz 12 - 30 A @ Ta 40 °C / 125 VAC; 60 Hz industrial < 5.2 mA (250 V / 60 Hz) > 1.7 kVDC between L-N > 2.7 kVDC between L/N-PE Test voltage (2 sec) -25 °C to 100 °C 25/100/21 acc. to IEC 60068-1 Suitable for appliances with protection class 1 acc. to IEC 61140 Screw Metal Dimensions Case 24-2 MTBF 51 ±0.3 3) max. 86 2) 1) M6 M6 5.3 ±0.3 max. 58 (7) (29.5) +0 95 -1 max. 106 max. 86 2) 1) max. 137 max. 100 max. 58 (7) (29.5) +0 95 -1 Industrial Version, IEC 60939, IEC 60601‑1, UL 1283, UL 544, EN 133 200, CSA C22.2 no. 8 Technical details > 200'000 h acc. to MIL-HB-217 F Case 24-6 max. 137 max. 100 max. 106 Line Filter 5.3 ±0.3 (17) 51 ±0.3 3) (17) 1) Line2) Load3) Nut torque 3...4 Nm. EMC Products FMAB 1-Phase Line Filters www.schurter.com/pg06_1 Diagrams Standard version 1) 2) 1) Line 2) Load Attenuation Loss - - - - differential mode _____ common mode Industrial Version 12 A 20 A 30 A Variants Rated Current [A] Filter-Type Leakage Current [mA] 12 Industrial Version 20 Industrial Version 30 Industrial Version Packaging unit L [mH] C1 (X2) C2 (Y2) [nF] C3 (Y2) C4 (X2) R [MΩ] Clamps [mm2] Weight [g] Housing Order Number 5.2 2 x 10 2.2 10 47 1 1 4 927 24-2 5500.2064 5.2 2 x 3.5 2.2 10 47 1 1 4 930 24-2 5500.2065 5.6 2 x 1.5 2.2 15 47 1 1 6 970 YB2 5500.2066 2 Pcs The specifications, descriptions and illustrations indicated in this document are based on EMC Products current information. All content is subject to modifications and amendments.