FMBC ECO 3-Phase Filters www.schurter.com/pg80 Ultra compact and efficient 2-stage filter in ECO design for 3-phase systems Description -High attenuation value -Cost optimized filter design with excellent price / perfomance ratio -Very light due to partial potting Standards Applications -Voltage rating 480 VAC for world wide acceptance -Especially designed for industrial applications such as: Frequency Converters, Stepper Motor Drives, UPS-Systems, Inverters -Qualified for use in equipment according IEC/EN 60950 -IEC 60939 -UL 1283, Edition 5, CSA 22.2 No. 8-M1986, @ Ta 40 °C References Approvals Weblinks Technical Data Rated Current Rated voltage Approval for Mounting General Product Information Approvals, RoHS, CHINA-RoHS, e-Store, Distributor-Stock-Check -VDE License Number: 40023521 10 - 115 A 480 VAC, 50/60 Hz 10 - 115 A @ Ta 40 °C / 480 VAC; 50/60 Hz Overload Current 1.5 x Ir Leakage Current industrial < 5 mA (440 V / 50 Hz) Dielectric Strength for 480 VAC > 2.25 kVDC between L-L > 3 kVDC between L-PE Number of Filter Stages 2 Weight 1.1 - 5 kg Material: Housing Alu. anodised Sealing Compound UL 94V-0 Screw-on mounting on chassis, upright or lengthwise Screw terminals -25 °C to 100 °C 25/100/21 acc. to IEC 60068-1 IP 20 acc. to IEC 60529 Suitable for appliances with protection class 1 acc. to IEC 61140 > 200'000 h acc. to MIL-HB-217 F Terminal Operating Temperature [°C] Climatic Category Degree of Protection Protection Class MTBF Dimensions Case 94 255 max. 50 max. +0 240 -2 (14.5) (20) 76 ±0.3 2) (12) 1) 6.5 ±0.3 0.5...0.6 Nm 101 max. (1) (220) (12) 25 ±0.3 1) Line 2) Load EMC Products FMBC ECO 3-Phase Filters www.schurter.com/pg80 Case 95 65 max. 340 max. 314 300 +0 -2 (15) (1) 135 max. (12) (29) 2) 6.5 ±0.3 1) 110 ±0.3 1.2...1.4 Nm (10) 45 ±0.3 1) Line 2) Load Case 96 340 max. 80 max. +0 (18.5) 314 -2 (300) (1) 150 max. (36) (20) 110 ±0.3 2) 1) 6.5 ±0.3 2.0...2.5 Nm (12) 55 ±0.3 1) Line 2) Load Case 97 6.5 ±0.3 379 max. 319 +0 -2 (30) (1) 90 max. (32) (15 155 max. (30) 2) 130 1) ±0.3 3.2...3.7 Nm 364 +0 -2 (14) 1) Line 2) Load EMC Products (12) ) (9) (12) 65 ±0.3 FMBC ECO 3-Phase Filters www.schurter.com/pg80 Technical data to the filter components Rated Current [A] L [mH] C1 [μF] C2 [μF] C3 [μF] C4 [nF] R1 [MΩ] R2 [MΩ] 10 2.3 1 1 1 10 1 1 20 1.5 1 1 1 10 1 1 36 0.9 1 1 2.2 47 1 2.2 50 0.45 1 1 2.2 47 1 2.2 66 0.45 1 1 2.2 47 1 2.2 80 0.32 1 1 2.2 47 1 2.2 115 0.24 1 2.2 2.2 100 1 2.2 Diagrams 1) 2) 1) Line 2) Load Attenuation Loss - - - - differential mode _____ common mode Industrial Version 10A (FMBC-0994-1000) 20A (FMBC-0994-2000) 36A (FMBC-0995-3600) 66A (FMBC-0996-6600) 80A (FMBC-0996-8000) 115A (FMBC-0997-H115) 50A (FMBC-0996-5000) Variants Rated Current @ Ta 40°C (75°C) [A] Characteristic Tripped Power Dissipation [W] Contact Resistance [mΩ] Leakage Current Weight [kg] Screw clamps [mm2] 2) Housing Order Number 37 5 1.1 10 94 FMBC-0994-1000 10 High attenuation 4 20 High attenuation 9 20 5 1.6 10 94 FMBC-0994-2000 36 High attenuation 5 3.5 7.5 2.2 16 95 FMBC-0995-3600 50 High attenuation 20 7.5 7.5 2.7 16 95 FMBC-0995-5000 66 High attenuation 22 4.5 7.5 3.4 25 96 FMBC-0996-6600 80 High attenuation 24 3.5 7.5 3.4 25 96 FMBC-0996-8000 115 High attenuation 36 2.5 15.0 5 35 97 FMBC-0997-H115 2) Maximum conductor cross section (wire gauge) to be used; a comparative table for AWG and mm² values can be found in the general product information www.schurter. com/emc_info 1) Worst case leakage current acc. to IEC60950 - Annex G4 (situation with two interrupted lines). Nominal leakage current acc. to IEC60950 - 5.2.5. can be found in section technical data. EMC Products FMBC ECO 3-Phase Filters www.schurter.com/pg80 Packaging unit 1 Pcs The specifications, descriptions and illustrations indicated in this document are based on EMC Products current information. All content is subject to modifications and amendments.