FMW-52 1-Phase Line Filters www.schurter.com/pg06_1 AC Filter 2-Stage Description -Chassis: Screw-on mounting, from top -Line-filter in standard version, 2 positions, high attenuation -Quick connect terminals 6.3 x 0.8 mm -Very high symmetrical and asymmetrical attenuation loss in the frequency range from 10kHz up to 30MHz Approvals Characteristics -Designed for increased requirements -Protection against interference voltage from the mains Possible interferences generated in the equipment are strongly attenuated 2-stage line filter with increased attenuation -For standard and industrial applications -Qualified for use in equipment according IEC/EN 60950 References -VDE License Number: 40004673 -UL License Number: E72928 General Product Information Weblinks Approvals, RoHS, CHINA-RoHS, Mating Connectors, e-Store, Distributor-Stock-Check, Accessories Technical Data Ratings IEC Ratings UL/CSA Leakage Current Dielectric Strength 2 - 6 A @ Ta 40 °C / 250 VAC; 50 Hz 2 - 6 A @ Ta 40 °C / 125 VAC; 60 Hz standard < 0.5 mA (250 V / 60 Hz) > 1.7 kVDC between L-N > 2.7 kVDC between L/N-PE Test voltage (2 sec) -25 °C to 100 °C 25/100/21 acc. to IEC 60068-1 Suitable for appliances with protection class 1 acc. to IEC 61140 Quick connect terminals 6.3 x 0.8 mm Alu. anodised Allowable Operation Temp. Climatic Category Protection Class Terminal Material: Housing Line Filter MTBF Standard Version, IEC 60939, IEC 60601‑1, UL 1283, UL 544, EN 133 200, CSA C22.2 no. 8 Technical details > 200'000 h acc. to MIL-HB-217 F Dimensions Case 09 max. 77 max. 31 (3.5) (17.5) 1) 6.3x0.8 (27) 2) 4.8 max. 46 max. 52 60.4 ±0.3 (12) 1) Line 2) Load EMC Products FMW-52 1-Phase Line Filters www.schurter.com/pg06_1 Diagrams Standard version 1) 2) 1) Line 2) Load Attenuation Loss - - - - differential mode _____ common mode Standard version 2A 6A Variants Rated Current [A] Filter-Type Cx (X2) [nF] Cy (Y2) [nF] R [MΩ] Weight [g] Housing Order Number 2 Standard Version 2x3 100 4.7 0.5 140 09 5500.2043 6 Standard Version 2 x 0.8 100 2.2 0.5 140 09 5500.2044 Packaging unit L [mH] 10 Pcs The specifications, descriptions and illustrations indicated in this document are based on EMC Products current information. All content is subject to modifications and amendments.