TetraFET DMD1012 DMD1012-A ROHS COMPLIANT METAL GATE RF SILICON FET MECHANICAL DATA B C (2 pls) 2 G (typ) 3 1 H P (2 pls) A D 5 4 E (4 pls) GOLD METALLISED MULTI-PURPOSE SILICON DMOS RF FET 100W – 28V – 500MHz PUSH–PULL F I FEATURES N M O J K • SIMPLE BIAS CIRCUITS D1 PIN 1 PIN 3 PIN 5 SOURCE (COMMON) DRAIN 2 GATE 1 DIM A B C D E F G H I J K M N O P Millimetres 15.24 10.80 45° 9.78 8.38 27.94 1.52R 10.16 21.84 0.10 1.96 1.02 4.45 34.04 1.63R • SUITABLE FOR BROAD BAND APPLICATIONS PIN 2 PIN 4 DRAIN 1 GATE 2 • ULTRA-LOW THERMAL RESISTANCE • BeO FREE Tol. 0.50 0.13 5° 0.13 0.13 0.13 0.13 0.15 0.23 0.02 0.13 0.13 0.38 0.13 0.13 Inches 0.600 0.425 45° 0.385 0.330 1.100 0.060R 0.400 0.860 0.004 0.077 0.040 0.175 1.340 0.064R Tol. 0.020 0.005 5° 0.005 0.005 0.005 0.005 0.006 0.009 0.001 0.005 0.005 0.015 0.005 0.005 • LOW Crss • HIGH GAIN – 13 dB MINIMUM APPLICATIONS • VHF/UHF COMMUNICATIONS from 1 MHz to 500 MHz ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated) PD BVDSS BVGSS ID(sat) Tstg Tj Power Dissipation Drain – Source Breakdown Voltage * Gate – Source Breakdown Voltage* Drain Current* Storage Temperature Maximum Operating Junction Temperature 500W (290W -A Version) 70V ±20V 15A –65 to 150°C 200°C * Per Side Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. Website: http://www.semelab.co.uk E-mail: [email protected] Document Number 7346 Issue 1 DMD1012 DMD1012-A ELECTRICAL CHARACTERISTICS (Tcase = 25°C unless otherwise stated) Parameter Test Conditions Min. Typ. Max. Unit PER SIDE BVDSS IDSS Drain–Source Breakdown Voltage Zero Gate Voltage Drain Current ID = 100mA VDS = 28V VGS = 0 3 mA 1 μA 7 V IGSS Gate Leakage Current VGS = 20V VDS = 0 VGS(th) Gate Threshold Voltage* ID = 10mA VDS = VGS gfs Forward Transconductance* VDS = 10V ID = 3A ID = 10mA VDS = VGS VGS(th)match Gate Threshold Voltage Matching Between Sides V VGS = 0 70 1 mhos 2.4 0.1 V TOTAL DEVICE GPS Common Source Power Gain PO = 100W η Drain Efficiency VDS = 28V VSWR Load Mismatch Tolerance f = 500MHz Ciss Input Capacitance VDS = 28V VGS = –5V f = 1MHz 180 pF Coss Output Capacitance VDS = 28V VGS = 0 f = 1MHz 90 pF Crss Reverse Transfer Capacitance VDS = 28V VGS = 0 f = 1MHz 7.5 pF IDQ = 1.2A 13 dB 50 % 20:1 — PER SIDE * Pulse Test: Pulse Duration = 300 μs , Duty Cycle ≤ 2% THERMAL DATA RTHj–case Thermal Resistance Junction – Case Max. 0.35°C / W 0.6 °C / W -A Version Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. Website: http://www.semelab.co.uk E-mail: [email protected] Document Number 7346 Issue 1