SENSITRON SHD218507B

SHD218507
SHD218507A
SHD218507B
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 4064, REV. Formerly part number SHD2187
HERMETIC POWER MOSFET
N-CHANNEL
FEATURES:
• 900 Volt, 1.6-Ohm, 6.7A MOSFET
•
•
•
Hermetic Package
Fast Switching
Low RDS (on)
MAXIMUM RATINGS
ALL RATINGS ARE AT TC = 25°C UNLESS OTHERWISE SPECIFIED.
RATING
GATE TO SOURCE VOLTAGE
ON-STATE DRAIN CURRENT
PULSED DRAIN CURRENT
OPERATING AND STORAGE TEMPERATURE
TOTAL DEVICE DISSIPATION
SYMBOL
VGS
ID
IDM
TJ/TSTG
PD
MIN.
-55
-
TYP.
-
MAX.
±20
6.7
27
+150
160
UNITS
Volts
Amps
Amps
°C
Watts
SYMBOL
BVDSS
MIN.
1000
TYP.
-
MAX.
-
UNITS
Volts
-
-
1.6
ELECTRICAL CHARACTERISTICS
CHARACTERISTIC
DRAIN TO SOURCE BREAKDOWN VOLTAGE
VGS = 0V, ID = 250
µA
STATIC DRAIN TO SOURCE ON STATE RESISTANCE
VGS = 10V, ID =
4.0A
GATE THRESHOLD VOLTAGE
VDS = VGS, ID = 250 µA
FORWARD TRANSCONDUCTANCE
VDS = 100V, ID =
4.0A
ZERO GATE VOLTAGE DRAIN CURRENT
VDS = 0.8 x Max. rating, VGS = 0V, TJ = 25°C
TJ =
125°C
GATE TO SOURCE LEAKAGE FORWARD
VGS = 20V
GATE TO SOURCE LEAKAGE REVERSE
VGS = -20V
TURN ON DELAY TIME
VDD = 450V
RISE TIME
ID =
6.7A
TURN OFF DELAY TIME
VGS=10V
FALL TIME
RG =
6.2Ω
DIODE FORWARD VOLTAGE
IS = 6.7A, VGS = 0V
Pulse test, t ≤ 300 µs, duty cycle d ≤ 2
%
REVERSE RECOVERY TIME
TJ = 25°C,
IF=6.7A, VDD =
100V
Ω
RDS(ON)
VGS(th)
gfs
2.0
4.9
-
4.5
-
Volts
S(1/Ω)
IDSS
-
-
100
500
µA
IGSS
-
-
nA
td(ON)
tr
td(OFF)
tf
-
20 34
130 37
100
-100
-
nsec
VSD
-
-
1.8
Volts
trr
-
610
920
nsec
•221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798•
• World Wide Web Site - www.sensitron.com • E-Mail Address - [email protected] •
di/dt =
100A/µsec
INPUT CAPACITANCE
VGS = 0 V
OUTPUT CAPACITANCE
VDS = 25 V
REVERSE TRANSFER CAPACITANCE
f = 1.0MHz
THERMAL RESISTANCE, JUNCTION TO CASE
Ciss
Coss
Crss
RthJC
-
-
2900
270 92
-
-
0.75
pF
•221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798•
• World Wide Web Site - www.sensitron.com • E-Mail Address - [email protected] •
°C/W
SHD218507
SHD218507A
SHD218507B
SENSITRON
DATA SHEET 4064, REV. -
MECHANICAL DIMENSIONS: in Inches / mm
.520±.020
(13.2±.508)
.510±.020
(12.9±.508)
.370±.010
(9.40±.254)
.370±.010
(9.40±.254)
.370±.010
(9.40±.254)
.090±.010
(2.29±.254)
.125±.010
(3.17±.254)
2
2
2
.030±.010
(.762±.254)
.030±.010
(.762±.254)
.030±.010
(.762±.254)
.610±.010
(15.5 ±.254)
.320±.010
(8.13±.254)
.610±.010
(15.5±.254)
.320±.010
(8.13 ±.254)
.610±.010
(15.5±.254)
3
3
3
.110 (2.79) Max
Moly Lid
.110 (2.80) MaxAlumina Ring
.020±.005 R
(.508±.127 )
Alumina Ring
.020±.002
(.508±.051)
.060±.010
(1.52±.254)
SHD-5
Moly Lid
.020±.005 R
(.508±.127 )
Alumina Ring
Moly Base
Terminal 1
Terminal 1
Copper Terminals
.130 (3.30) Max
Moly Base
Terminal 1
.015±.002
(.381±.051)
.060±.010
(1.52±.254)
SHD-5A
SHD-5B
PINOUT TABLE
DEVICE TYPE
MOSFET
SHD-5/A/B PACKAGE
PIN 1
DRAIN
PIN 2
SOURCE
PIN 3
GATE
•221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798•
• World Wide Web Site - www.sensitron.com • E-Mail Address - [email protected] •
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version
of the datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment,
medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by
means of users’ fail-safe precautions or other arrangement.
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during
operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual
property claims or any other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from
use at a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of
Sensitron Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will
hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third
party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and
regulations.
• 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 •
• World Wide Web - http://www.sensitron.com • E-Mail Address - [email protected]