SENSITRON SEMICONDUCTOR SHD218504 TECHNICAL DATA DATA SHEET 1011, REV Formerly Part Number SHD2184/A/B HERMETIC POWER MOSFET N-CHANNEL FEATURES: • 400 Volt, 0.3 Ohm, 9.0A MOSFET • Low RDS (on) • Equivalent to IRF350 Series MAXIMUM RATINGS ALL RATINGS ARE AT TC = 25°C UNLESS OTHERWISE SPECIFIED. RATING GATE TO SOURCE VOLTAGE ON-STATE DRAIN CURRENT @ TC = 25°C ON-STATE DRAIN CURRENT @ TC = 100°C OPERATING AND STORAGE TEMPERATURE TOTAL DEVICE DISSIPATION @ TC = 25°C THERMAL RESISTANCE, JUNCTION TO CASE SYMBOL VGS ID ID TOP/TSTG PD RthJC MIN. -55 - TYP. - MAX. ±20 14 9.0 +150 200 0.6 UNITS Volts Amps Amps °C Watts °C/W SYMBOL BVDSS MIN. 400 TYP. - MAX. - UNITS Volts - - ELECTRICAL CHARACTERISTICS CHARACTERISTIC DRAIN TO SOURCE BREAKDOWN VOLTAGE VGS = 0V, ID = 1.0mA STATIC DRAIN TO SOURCE ON STATE RESISTANCE VGS = 10V, ID = 9.0A VGS = 10V, ID = 14A GATE THRESHOLD VOLTAGE VDS ≥ 15VGS, IDS = 9.0A FORWARD TRANSCONDUCTANCE VDS ≥ 15V, IDS = 9.0A ZERO GATE VOLTAGE DRAIN CURRENT VDS = Max. Rating, VGS = 0V VDS = 0.8xMax. Rating, VGS = 0V, TJ = 125°C GATE TO SOURCE LEAKAGE FORWARD VGS = 20V GATE TO SOURCE LEAKAGE REVERSE VGS = -20V TURN ON DELAY TIME VDD = 200V, RISE TIME ID = 14A, TURN OFF DELAY TIME RG = 2.35Ω FALL TIME TOTAL GATE CHARGE ID = 14A, GATE TO SOURCE CHARGE VGS = 10V, GATE TO DRAIN CHARGE VDS =0.5xMax. Rating DIODE FORWARD VOLTAGE TC = 25°C, IS = 14A, VGS = 0V REVERSE RECOVERY CHARGE TJ = 25°C, di/dt ≤ 100A/μsec, VDD ≤ 50V REVERSE RECOVERY TIME TJ = 25°C, IF = 14A, di/dt ≤ 100A/μsec, VDD ≤ 50V INPUT CAPACITANCE VGS = 0 V OUTPUT CAPACITANCE VDS = 25 V REVERSE TRANSFER CAPACITANCE f = 1.0MHz RDS(ON) VGS(th) gfs 6.0 6.0 - - - Ω 0.3 0.4 - IGSS - - td(ON) tr td(OFF) tf Qg Qgs Qgd VSD - - 52 5.0 25 - - 250 1000 100 -100 35 190 170 130 110 18 65 1.7 QRR - - 11 trr - - 1200 IDSS Volts S(1/Ω) μA nA nsec nC nC nC Volts μC nsec Ciss Coss Crss - 2600 680 250 - • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 • • World Wide Web Site - http://www.sensitron.com • E-mail Address - [email protected] • pF SHD218504 SENSITRON DATA SHEET 1011 REVISION - MECHANICAL DIMENSIONS: in Inches / mm .370±.010 (9.40±.254) .510±.020 (12.9±.508) .520±.020 (13.2±.508) .370±.010 (9.40±.254) 2 .125±.010 (3.17±.254) .030±.010 (.762±.254) .370±.010 (9.40±.254) .090±.010 (2.29±.254) 2 .610±.010 (15.5 ±.254) 2 .030±.010 (.762±.254) .030±.010 (.762±.254) 3 .320±.010 (8.13±.254) .610±.010 (15.5±.254) 3 .110 (2.80) Max .320±.010 (8.13 ±.254) .610±.010 (15.5±.254) 3 Alumina Ring Terminal 1 SHD-5 .110 (2.79) Max Moly Lid .020±.005 R (.508±.127 ) Copper Terminals Alumina Ring .130 (3.30) Max Moly Base Terminal 1 .020±.002 (.508±.051) .060±.010 (1.52±.254) Moly Lid Alumina Ring Moly Base Terminal 1 SHD-5A .020±.005 R (.508±.127 ) .015±.002 (.381±.051) .060±.010 (1.52±.254) SHD-5B PINOUT TABLE DEVICE TYPE MOSFET, SURFACE MOUNT SHD-5, 5A, 5B PACKAGE PIN 1 DRAIN PIN 2 SOURCE PIN 3 GATE DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 • • World Wide Web Site - http://www.sensitron.com • E-mail Address - [email protected] •