SSDI SDA172K-2

SDA172HF series
Solid State Devices, Inc.
14701 Firestone Blvd * La Mirada, CA 90638
Phone: (562) 404-4474 * Fax: (562) 404-1773
[email protected] * www.ssdi-power.com
Designer’s Data Sheet
Part Number/Ordering Information
SDA172 __ HF __
│
│
│
│
│
│
│
│
└
│
│
│
│
└
30 nsec
1.3 Amp
Single Phase Bridge
Rectifier Assembly
1/
Screening 2/
└
__ = Not Screened
TX = TX Level
TXV = TXV Level
S = S Level
FEATURES:
Reverse Recovery








HF = Hyper Fast
Family/Voltage
J = 600 V
K = 700 V
L = 800 V
M = 900 V
Reverse Recovery Time: 30 ns Max
Average Output Current: 1.3 Amps
PIV: 600 to 900 Volts
Hermetically Sealed Internal Discretes
Thermal Conductive Epoxy Encapsulated
Surface or Radial Mounting*
Available in Higher Voltages
Available in Ultra Fast, Fast, and Standard
Recovery
*For surface mounting add -2 to part number.
Electrical
Characteristics
Part Number
Peak
Inverse
Voltage
(per leg)
Average DC
Output Current
TC=Case Temp
Reverse
Recovery
Time
Peak Forward
Surge Current
(1 Cycle)
Volts
50ºC
Amps
100ºC
Amps
Max
ns
Amps
Maximum
Forward
Voltage
(per leg) @ 1.0
ADC
Maximum
Reverse Current
(per leg)
@ PIV
Volts
25ºC
μA
100ºC
μA
SDA172J
SDA172J-2
HF
600
1.3
1.0
30
25
1.9
10
200
SDA172K
SDA172K-2
HF
700
1.3
1.0
30
25
1.9
10
200
SDA172L
SDA172L-2
HF
800
1.3
1.0
30
25
1.9
10
200
SDA172M
SDA172M-2
HF
900
1.3
1.0
30
25
1.9
10
200
NOTES:
1/ For ordering information, price, and availability contact factory.
2/ Screening based on MIL-PRF-19500. Screening
flows available on request.
NOTE: All specifications are subject to change without notification.
SCD's for these devices should be reviewed by SSDI prior to release.
DATA SHEET #: RA0103A
DOC
SDA172HF series
Solid State Devices, Inc.
14701 Firestone Blvd * La Mirada, CA 90638
Phone: (562) 404-4474 * Fax: (562) 404-1773
[email protected] * www.ssdi-power.com
SDA172J through SDA172M:
*For information on curves, contact the Factory Representative for Engineering Assistance.
Design Notes:
Operating Temperature TOP -55 OC to +150 OC
Reverse Recovery Time IF = 500mA, IR = 1.0 Amp, Irr = 250mA
NOTE: All specifications are subject to change without notification.
SCD's for these devices should be reviewed by SSDI prior to release.
DATA SHEET #: RA0103A
DOC