SHM15F-SHM140F and SHM15FSMS – SHM40FSMS Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com Designer’s Data Sheet 50-250 mAmp 1500 ─ 14000 VOLTS FAST RECOVERY HIGH VOLTAGE RECTIFIER Part Number / Ordering Information 1/ SHM_ _ F __ __ ⏐ ⏐ ⏐ ⏐ ⏐ ⏐ ⏐ ⏐ ⏐ ⏐ ⏐ ⏐ ⏐ ⏐ ⏐ ⏐ ⏐ 2/ L Screening = None TX = TX Level TXV = TXV Level S = S Level L Package FEATURES: ____ = Axial Leaded SMS = Surface Mount Square Tab L Recovery Time L F = Fast Recovery Voltage 15 = 1500 V 20 = 2000 V 25 = 2500 V 30 = 3000 V 40 = 4000 V 50 = 5000 V • • • • • • • 60 = 6000 V 80 = 8000 V 100 = 10000 V 120 = 12000 V 140 = 14000 V • Fast Recovery: 150-200 nsec Maximum PIV to 14000 Volts Hermetically Sealed Axial Lead Package Void-Free Construction Metallurgically Bonded 175°C Maximum Operating Temperature Also Available in Standard and Ultra Fast Recovery Versions. Contact Factory. TX, TXV, and Space Level Screening Available2/ ELECTRICAL CHARACTERISTICS Part Number Peak Inverse Voltage Average Rectifier Current Maximum Reverse Current Maximum Forward Voltage Maximum Surge Current (1 Cycle) Maximum Reverse Recovery Time Maximum Junction Capacitance Symbol PIV I0 IR @ PIV VF4/ IFSM tRR7/ CJ μA Volts Amps nsec Units Conditions mA Volts 25°C 100°C 25°C 100°C Axial SMS SHM15F 1500 250 160 185 1.0 25 SHM20F 2000 250 160 185 1.0 25 SHM25F 2500 250 160 185 1.0 25 SHM30F 3000 150 100 110 1.0 25 SHM40F 4000 150 100 110 1.0 25 SHM50F 5000 150 100 110 1.0 25 SHM60F 6000 100 65 75 1.0 25 SHM80F 8000 100 65 75 1.0 25 SHM100F 10000 100 65 75 1.0 25 SHM120F 12000 100 65 75 1.0 25 SHM140F 14000 50 35 40 1.0 25 1/ For Ordering Information, Price, Operating Curves, and Availability – Contact Factory. 2/ Screening based on MIL-PRF-19500. Screening flows available on request. 3/ Operating and testing over 10,000 V/inch may require encapsulation or immersion in a suitable dielectric material. 4/ IF = IO; Max. forward voltage measured with instantaneous forward pulse of 300µsec minimum. 5/ Max. lead/end tab temp for soldering is 250°C, 3/8” from the case for 5 sec maximum. 6/ Operating and storage temperature: -65°C to +175°C. 7/ Reverse Recovery Test Conditions: IF=50mA, IR=100mA, IRR=25mA, TA=25°C. 8/ Consult manufacturing for operating curves. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. 25°C 25°C 25°C 8.0 8.0 8.0 12 12 12 18 18 18 20 24 15 15 15 10 10 10 5 5 5 5 1 150 150 150 150 150 150 150 150 150 150 200 Axial DATA SHEET #: RV0011C Typical Thermal Impedance θJL pF VR = 100V fT = 1MHZ 8 8 8 4 4 4 2 2 2 2 2 θJE °C/W SHM SMS 65 65 65 65 65 65 65 65 65 65 95 55 55 55 55 55 55 55 55 55 55 85 SMS DOC SHM15F-SHM140F and SHM15FSMS – SHM40FSMS Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com PACKAGE OUTLINE: Axial D B DIMENSIONS: SHM15-50 D ØC ØA DIM MIN MAX A --- .140” B --- .300” C .025” .033” D 1.00” --- DIMENSIONS: SHM60-140 DIM MIN MAX A --- .140” PACKAGE OUTLINE: Surface Mount Square Tab B --- .400” C .025” .033” D 1.00” --- DIMENSIONS: SHM15-50 DIM MIN MAX A .127” .140” B .280” .320” C .022” .028” D .002” --- DIMENSIONS: SHM60-140 NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DIM MIN MAX A .127” .140” B .360” .450” C .022” .028” D .002” --- DATA SHEET #: RV0011C DOC