SDH20F & FSMS thru SDH60F & FSMS Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com Designer’s Data Sheet 1-1.5 AMP 2000-6000 VOLTS FAST RECOVERY HIGH VOLTAGE RECTIFIER Part Number / Ordering Information 1/ SDH __ F ⏐ ⏐ ⏐ ⏐ ⏐ ⏐ ⏐ ⏐ L __ __ 2/ L Screening = None ⏐ ⏐ TX = TX Level ⏐ ⏐ TXV = TXV Level ⏐ ⏐ S = S Level ⏐ ⏐ L Package ⏐ ___ = Axial ⏐ SMS = Surface Mount Square Tab ⏐ Recovery Time L FEATURES: • • • F = Fast Recovery Voltage Fast Recovery: 180 nsec Maximum PIV to 6000 Volts Hermetically Sealed Axial and Surface Mount Package Void-Free Construction Metallurgically Bonded 175°C Maximum Operating Temperature Replacement for 1N6512 thru 1N6518 and 1N6520 thru 1N6526 in Many Applications TX, TXV, and Space Level Screening Available2/ Available in Ultra Fast and Hyper Fast Versions. Contact Factory. • • • • 20 = 2000 V 25 = 2500 V 30 = 3000 V 40 = 4000 V 50 = 5000 V 60 = 6000 V • • ELECTRICAL CHARACTERISTICS Part Number Peak Inverse Voltage Average Rectifier Current Maximum Reverse Current Maximum Forward Voltage Maximum Surge Current (1 Cycle) Maximum Reverse Recovery Time Maximum Junction Capacitance Symbol PIV I0 IR VF IFSM tRR CJ A μA Volts Amps nsec pF Units Conditions Volts Typical Thermal Impedance θJE θJL °C/W 25°C 100°C 25°C 100°C 25°C 25°C 25°C VR = 100V fT = 1MHZ L= 3/8” SDH20F 2000 1.5 1.0 1.0 15 6.0 60 180 10 4 8 SDH25F 2500 1.5 1.0 1.0 15 6.0 60 180 10 4 8 SDH30F SDH40F SDH50F SDH60F 3000 4000 5000 6000 1.5 1.0 1.0 1.0 1.0 0.5 0.5 0.5 1.0 1.0 1.0 1.0 15 15 15 15 6.0 9.5 9.5 9.5 60 40 40 40 180 180 180 180 10 8 8 8 4 4 4 4 8 8 8 8 1/ For Ordering Information, Price, and Availability – Contact Factory. 2/ Screening based on MIL-PRF-19500. Screening flows available on request. 3/ Operating and testing over 10,000 V/inch may require encapsulation or immersion in a suitable dielectric material. 4/ IF = IO; Max. forward voltage measured with instantaneous forward pulse of 300µsec minimum. 5/ Max. Lead/End Tab temp. for soldering is 250°C, 3/8” from case for 5 sec maximum. 6/ Operating and storage temperature: -65°C to +175°C. 7/ Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=.25A, TA=25°C. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. Axial DATA SHEET #: RC0058D Surface Mount Square Tab DOC SDH20F & FSMS thru SDH60F & FSMS Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com PACKAGE OUTLINE: Axial D B DIMENSIONS ØC D ØA DIM MIN MAX A --- 0.180” B .230” .270” C 0.047” 0.053” D 1.00” –– PACKAGE OUTLINE: Surface Mount Square Tab B A A C DIMENSIONS DIM MIN MAX A 0.195” 0.205” B 0.280” 0.320” C 0.020” 0.030” D 0.002” –– D Notes: Consult manufacturing for operating curves. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RC0058D DOC