SDR1D thru SDR1N Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com 1.0 AMPS 200 ─ 1200 VOLTS 50 – 80 nsec ULTRA FAST RECTIFIER Designer’s Data Sheet Part Number/Ordering Information 1/ SDR1 __ __ __ │ │ └ Screening 2/ │ │ __ = Not Screened │ │ TX = TX Level │ │ TXV = TXV │ │ S = S Level │ │ │ └ Package Type __ = Axial Leaded │ │ D = 200V K = 800V └ Family G = 400V M = 1000V J = 600V N = 1200V FEATURES: 50-80 ns Max @ 25ºC 4/ 80-130 ns Max @ 100ºC 4/ • Ultra Fast Recovery: • • • • • • • • Single Chip Construction PIV to 1200 Volts Low Reverse Leakage Current Hermetically Sealed For High Efficiency Applications Metallurgically Bonded 2/ TX, TXV, and S-Level Screening Available Available in Surface Mount (SM) and Square Tab Surface Mount (SMS) Versions (Ref. RU0003) Hyper Fast Version available (Ref. RH0119) • MAXIMUM RATINGS 3/ RATING SDR1D SDR1G SDR1J SDR1K SDR1M SDR1N Peak Repetitive Reverse Voltage And DC Blocking Voltage Rectified Forward Forward Current (Resistive Load, 60 Hz, Sine Wave, TA = 25ºC) Peak Surge Current (8.3 msec Pulse, Half Sine Wave Superimposed on Io, allow junction to reach equilibrium between pulses, TA = 25ºC) Operating & Storage Temperature Thermal Resistance, Junction to Lead, L = 3/8” SYMBOL VALUE UNIT VRRM VRWM VR 200 400 600 800 1000 1200 Volts IO 1 Amp IFSM 25 Amps TOP and TSTG RθJL -65 to +175 ºC ºC/W 45 Axial Leaded NOTES: 1/ 2/ 3/ 4/ 5/ For Ordering Information, Price, and Availability- Contact Factory. Screening Based on MIL-PRF-19500. Screening Flows Available on Request. Unless Otherwise Specified, All Electrical Characteristics @25ºC. Recovery Conditions: IF = 0.5 Amp, IR = 1.0 Amp, IRR to .25 Amp. For information on operating curves, contact factory. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RU0005H DOC SDR1D thru SDR1N Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com ELECTRICAL CHARACTERISTICS 3/ CHARACTERISTICS SYMBOL VALUE UNIT Instantaneous Forward Voltage Drop (IF = 1Adc, 300- 500 μs Pulse, TA = 25ºC) SDR1D thru SDR1J SDR1K thru SDR1N VF1 1.70 1.90 Vdc Instantaneous Forward Voltage Drop (IF = 1Adc, 300- 500 μs Pulse, TA = -55ºC) SDR1D thru SDR1J SDR1K thru SDR1N VF2 2.10 2.30 Vdc Maximum Reverse Leakage Current (Rated VR, 300 μs Pulse Minimum , TA = 25ºC) IR1 5 μA Maximum Reverse Leakage Current (Rated VR, 300 μs Pulse Minimum , TA = 100ºC) IR2 500 μA Junction Capacitance (VR = 10Vdc, TA = 25ºC , f = 1MHz) CJ 24 pf trr 50 60 70 80 ns SDR1D thru SDR1J SDR1K SDR1M SDR1N Maximum Reverse Recovery Time 4/ 5/ Axial Leaded Case Outline : NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DIM. A B C D DIMENSIONS MIN. ----.027” .95” DATA SHEET #: RU0005H MAX. .150” .190” .033” --- DOC