SDR3A and SDR3ASMS thru SDR3N and SDR3NSMS Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com 3.0 AMPS 50 ─ 1200 VOLTS 50 – 80 nsec ULTRA FAST RECTIFIER Designer’s Data Sheet Part Number/Ordering Information 1/ SDR3 __ __ __ │ │ └ Screening 2/ │ │ __ = Not Screened │ │ TX = TX Level │ │ TXV = TXV │ │ S = S Level │ │ │ └ Package Type __ = Axial Leaded │ │ SMS = Surface Mount Square Tab │ J = 600V └ Family A = 50 V B = 100V K = 800V D = 200V M = 1000V G = 400V N = 1200V FEATURES: 50-80 ns Max @ 25ºC 4/ 85-125 ns Max @ 100ºC 4/ • Ultra Fast Recovery: • • • • • • • • Single Chip Construction PIV to 1200 Volts Low Reverse Leakage Current Hermetically Sealed For High Efficiency Applications Available in Axial and Surface Mount Versions Metallurgically Bonded TX, TXV, and S-Level Screening Available 2/ MAXIMUM RATINGS 3/ RATING Peak Repetitive Reverse Voltage And DC Blocking Voltage SDR3A and SDR3ASMS SDR3B and SDR3BSMS SDR3D and SDR3DSMS SDR3G and SDR3GSMS SDR3J and SDR3JSMS SDR3K and SDR3KSMS SDR3M and SDR3MSMS SDR3N and SDR3NSMS Rectified Forward Forward Current (Resistive Load, 60 Hz, Sine Wave, TA = 25°C) Peak Surge Current (8.3 msec Pulse, Half Sine Wave Superimposed on Io, allow junction to reach equilibrium between pulses, TA = 25°C) Operating & Storage Temperature Thermal Resistance, Junction to Lead, L = 3/8” Junction to End Tab NOTES: 1/ For Ordering Information, Price, and Availability- Contact Factory. 2/ Screening Based on MIL-PRF-19500. Screening Flows Available on Request. 3/ Unless Otherwise Specified, All Electrical Characteristics @25ºC. SYMBOL VALUE UNIT VRRM VRWM VR 50 100 200 400 600 800 1000 1200 Volts IO 3 Amp IFSM 75 Amps TOP and TSTG RθJL RθJE -65 to +175 °C 20 14 °C/W Axial Leaded SMS 4/ Recovery Conditions: IF = 0.5 Amp, IR = 1.0 Amp, IRR to .25 Amp. 5/ For information on operating curves, contact factory. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RU0013G DOC SDR3A and SDR3ASMS thru SDR3N and SDR3NSMS Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com ELECTRICAL CHARACTERISTICS 3/ CHARACTERISTICS SYMBOL VALUE UNIT Instantaneous Forward Voltage Drop (IF = 3Adc, 300- 500 μs Pulse, TA = 25°C) SDR3A thru SDR3J SDR3K thru SDR3N VF1 1.35 1.90 Vdc Instantaneous Forward Voltage Drop (IF = 3Adc, 300- 500 μs Pulse, TA = -55°C) SDR3A thru SDR3J SDR3K thru SDR3N VF2 1.50 2.10 Vdc Maximum Reverse Leakage Current (Rated VR, 300 μs Pulse Minimum , TA = 25°C) IR1 5 μA Maximum Reverse Leakage Current (Rated VR, 300 μs Pulse Minimum , TA = 100°C) IR2 500 μA Junction Capacitance (VR = 10Vdc, TA = 25°C , f = 1MHz) CJ 50 pf trr 50 60 70 80 ns SDR3A thru SDR3J SDR3K SDR3M SDR3N Maximum Reverse Recovery Time 4/ Axial Leaded Case Outline 5/: DIMENSIONS DIM. MIN. MAX. A .120” .180” B --- .230” C .047” .053” D 1.00” --- NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. Square Tab Surface Mount Case Outline 5/: DATA SHEET #: RU0013G DIMENSIONS DIM. MIN. A .172” B .180” C .022” D .002” MAX. .180” .280” .028” --- DOC