SPD0802 and SMS thru SPD1002 and SMS Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com 2 AMP 80 - 100 VOLTS SCHOTTKY RECTIFIER Designer’s Data Sheet Part Number/Ordering Information 1/ SPD __ __ __ │ │ └ Screening 2/ │ │ │ │ │ │ │ └ │ │ │ │ └ __ = Not Screened TX = TX Level TXV = TXV S = S Level Features: Package Type __ = Axial Leaded SMS = Surface Mount Square Tab Family/Voltage 0802 = 80 V 0902 = 90 V 1002 = 100 V • • • • • • • • PIV to 100 Volts Extremely Low Forward Voltage Drop Low Reverse Leakage Current High Surge Capacity HV/Replacement for 1N5817 - 1N5819 Series Hermetically Sealed TX, TXV, and Space Level Screening Available2/ Category III metallurgical bond per MIL PRF 19500 appendix A Maximum Ratings Reverse Voltage SPD0802 & SMS SPD0902 & SMS SPD1002 & SMS Average Rectified Forward Current (Resistive Load, 60Hz, Sine Wave, TL or TE = 55 oC) Symbol Value Units VRRM VRWM VR 80 90 100 Volts Io 2 Amps IFSM 40 Amps TOP & TSTG -55 to +150 ºC RJL RJE 70 50 ºC/W Peak Surge Current (8.3 ms Pulse, Half Sine Wave Superimposed on Io, allow junction to reach equilibrium between pulses, TA = 25oC) Operating and Storage Temperature Range Maximum Thermal Resistance Junction to Lead, L = .25" (Axial Lead) Junction to End Tab (Surface Mount) NOTES: Axial Lead 1/ For Ordering Information, Price, and Availability- Contact Factory. 2/ Screening Based on MIL-PRF-19500. Screening Flows Available on Request. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RS0006F Surface Mount Square Tab DOC Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com SPD0802 and SMS thru SPD1002 and SMS Electrical Characteristic Instantaneous Forward Voltage Drop (Tj = 25ºC, 300 - 500 µsec pulse) Instantaneous Forward Voltage Drop (IF = 1A, 300 - 500 µsec pulse) Reverse Leakage Current (Vr = Rated Vr, TA = 25ºC, 300 µsec min pulse) Reverse Leakage Current (Vr = Rated Vr, TA = 100ºC, 300 µsec min pulse) Junction Capacitance (Vr=10 Vdc, TA=25ºC, f=1MHz) If = 0.5A If = 1A If = 2A TA = -55C TA = 100C Symbol Min Max Units Vf1 Vf2 Vf3 Vf4 Vf5 ----------- 0.73 0.85 0.95 0.88 0.78 Ir1 --- 100 µA Ir2 --- 2 mA Cj --- 40 pF Volts Volts Consult manufacturing for operating curves DIMENSIONS DIM MIN MAX A 0.155” 0.185” B 0.080” 0.107” C 1.00” -- D .028” 0.32” DIMENSIONS DIM MIN MAX A 0.200” 0.235” B 0.125” 0.135” C 0.020” 0.030” D 0.002” -- Dimensions prior to solder dip NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RS0006F DOC