SPD502-SPD506 and SPD502SMS - SPD506SMS Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com DESIGNER’S DATA SHEET 5 AMP 200–600 Volts 40 nsec HYPER FAST RECTIFIER Part Number / Ordering Information 1/ SPD5 __ ___ __ ⏐ ⏐ ⏐ ⏐ ⏐ ⏐ ⏐ ⏐ ⏐ 2/ L Screening = None TX = TX Level TXV = TXV Level S = S Level Features: L Package ___ = Axial Leaded SMS = Surface Mount Square Tab L Voltage 02 = 200 V 03 = 300 V 04 = 400 V 05 = 500 V 06 = 600V • • • • • • • • Hyper Fast Recovery: 40 nsec Max. PIV to 600 Volts Low Forward Voltage Drop Void Free Construction Hermetically Sealed Surface Mount Package For High Efficiency Applications Single Chip Construction TX, TXV, and S-Level Screening Available2/ Maximum Ratings Peak Repetitive Reverse and DC Blocking Voltage SPD502 SPD503 SPD504 SPD505 SPD506 Symbol Value Units VRRM Volts VR 200 300 400 500 600 Io 5 Amps IFSM 100 Amps Top & Tstg -65 to +175 ºC RθJL RθJE 15 10 ºC/W VRWM Average Rectified Forward Current (Resistive Load, 60 Hz, Sine Wave, TA = 25ºC) Surge Current (8.3 ms Pulse, Half Sine Wave Superimposed on Io, Allow Junction to Reach Equilibrium between Pulses, TA = 25ºC) Operating & Storage Temperature Maximum Thermal Resistance Junction to Lead, L=3/8” Junction to End Tab Notes: 1/ For Ordering Information, Price, Operating Curves, and Availability – Contact Factory. 2/ Screening Based on MIL-PRF-19500. Screening Flows Available on Request. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. Axial Leaded DATA SHEET #: RH0105B SMS DOC SPD502-SPD506 and SPD502SMS - SPD506SMS Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com Electrical Characteristics Instantaneous Forward Voltage Drop (IF = 5 Adc, TA = 25ºC, 300 µs pulse) Instantaneous Forward Voltage Drop (IF = 5Adc, TA = -55ºC, 300 µs pulse) Reverse Leakage Current (Rated VR, TA = 25ºC, 300 µs pulse minimum) Reverse Leakage Current (Rated VR, TA = 100ºC, 300 µs pulse minimum) Junction Capacitance (VR = 10 Vdc, TA = 25ºC, f = 1MHz) Reverse Recovery Time (IF = 500 mA, IR = 1A, IRR = 0.25A, TA = 25ºC) Symbol Max Units VF 1.6 Vdc VF 1.75 Vdc IR 10 μA IR 1 mA CJ 50 pF trr 40 nsec Case Outline: (Axial) DIMENSIONS D B D ØC ØA DIM A B C D MIN .140” .170” .047” 1.00” MAX .170” .230” .053” --- Case Outline: Surface Mount Square Tab DIMENSIONS DIM A B C D NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RH0105B MIN .172” .220” .020” .002” MAX .180” .270” .035” --- DOC