SPR2KUF thru SPR2NUF Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com REVERSE TRANSIENT RATED Designer’s Data Sheet OPTIMIZED FOR USE IN T.W.T. APPLICATIONS Part Number/Ordering Information 1/ SPR2___ __ __ 2 Amp ULTRA FAST RECTIFIER __ 2/ │ │ │ └ Screening │ │ │ __ = Not Screened │ │ │ TX = TX Level │ │ │ TXV = TXV │ │ │ S = S Level │ │ │ │ │ └ Package Type __ = Axial │ │ SMS = Surface Mount Square Tab │ │ │ └ Reverse Recovery │ UF = Ultra Fast Recovery │ └ Device Type ( VRWM ) K = 800V M = 1000V N = 1200V 800-1200 Volts 50 nsec FEATURES: • • • • • • • • • Ultra Fast Reverse Recovery Time: 50 nsec Max PIV to 1200 Volts Reverse Transient Rated: 1 Amp (Typ 1200Wpk Hermetically Sealed For High Efficiency Applications Available in Axial and Surface Mount Versions Metallurgically Bonded Solid Silver Leads for High Thermal Conductivity 2/ TX, TXV, and S-Level Screening Available MAXIMUM RATINGS 3/ RATING SPR2K SPR2M SPR2N Peak Repetitive Reverse Voltage DC Blocking Voltage Average Rectified Forward Current (Resistive Load, 60 Hz, Sine Wave, TC = 25°C) Peak Surge Current (8.3ms pulse, half sine wave superimposed on Io, allow junction to reach equilibrium between pulses, TA = 25°C) Operating & Storage Temperature Maximum Thermal Resistance Junction to Leads, L=3/8”(Axial) Junction to End Tab (SMS) NOTES: SYMBOL VALUE UNIT VRRM VRWM VR 800 1000 1200 Volts IO 2 Amps IFSM 25 Amps TOP and TSTG RθJL RθJE -65 to +175 °C 38 7.0 °C/W Axial Leaded SMS 1/ For Ordering Information, Price, and Availability- Contact Factory. 2/ Screening Based on MIL-PRF-19500. Screening Flows Available on Request. 3/ Unless Otherwise Specified, All Electrical Characteristics @25ºC. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RU0009D DOC SPR2KUF thru SPR2NUF Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com CHARACTERISTICS SYMBOL MAX UNIT VF 2.1 3.1 Vdc Reverse Leakage Current (VR = rated, 300-500 μs Pulse Minimum , TA = 25°C) IR1 5 μA Maximum Reverse Leakage Current (VR = 80% rated, 300 μs Pulse Minimum , TA = 125°C) IR2 120 μA Junction Capacitance (TA = 25°C , f = 1MHz, VR = 10V) CJ 22 pf Reverse Recovery Time (IF = 500mA, IR = 1A, IRR = 250mA, TA = 25°C) trr 50 nsec Reverse Energy Test (Half sine wave, tp = 600ns @ 50% of IP) IPK 1 (Minimum) A IF = 0.75A IF = 2A Instantaneous Forward Voltage Drop (TA = 25°C, 300 μs Pulse) SMS AXIAL D B C D ØC A ØA A D B DIM MIN NOM MAX MIN MAX A --- --- .140” .140” .150” B --- --- .180” .190” .230” C --- .030” --- .019” .028” D .97” --- --- .001” --- NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RU0009D DOC