SUM60F thru SUM90F and SUM60FSMS thru SUM90FSMS Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com Designer’s Data Sheet 500 mA 6,000 thru 9,000 VOLTS 180 ns FAST RECOVERY RECTIFIER Part Number/Ordering Information 1/ SUM __ __ __ │ │ │ │ │ │ │ │ │ └ │ └ Screening 2/ │ __ = Not Screened │ TX = TX Level │ TXV = TXV │ S = S Level │ └ Package Type __ = Axial Leaded SMS = Surface Mount Square Tab Voltage/Family 60F = 6,000V 70F = 7,000V 80F = 8,000V 90F = 9,000V MAXIMUM RATINGS 3/ • • • • • • • • FEATURES: PIV to 9,000 Volts Hermetically Sealed Axial and Square Tab Surface Mount Package Fast Recovery 180 nsec Maximum 4/ Void Free Construction Metallurgically Bonded 175°C Maximum Operating Temperature TX, TXV, and S-Level Screening Available2/ Also Available in Ultra Fast Versions, Consult Factory 6/ RATING Peak Inverse Voltage Average Rectified Current SUM60F and SUM60FSMS SUM70F and SUM70FSMS SUM80F and SUM80FSMS SUM90F and SUM90FSMS TA = 25°C TA = 100°C Surge Current (1 Cycle) Operating & Storage Temperature 5/ NOTES: 1/ For Ordering Information, Price, Operating Curves, and Availability- Contact Factory. 2/ Screening Based on MIL-PRF-19500. Screening Flow Available on Request. 3/ Unless Otherwise Specified, All Electrical Characteristics @25ºC. SYMBOL VALUE UNIT PIV 6000 7000 8000 9000 Volts IO1 IO2 500 300 mA IFSM 25 Amps TJ and TSTG -65 to +175 °C Axial Leaded SMS 4/ IF = 500mA, IR = 1A, IRR = 250mA, TA = 25°C 5/ Maximum lead/end temperature for soldering is 250°C, 3/8” from case for 5 sec. maximum. 6/ Operating and testing over 10,000 V/inch may require encapsulation or immersion in suitable dielectric material. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RC0037D DOC SUM60F thru SUM90F and SUM60FSMS thru SUM90FSMS Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com ELECTRICAL CHARACTERISTICS 3/ 6/ CHARACTERISTICS Maximum Forward Voltage (300μs pulse minimum) Maximum Reverse Leakage Current (VR = Rated) SYMBOL VALUE UNIT IF = 500 mA VF 13.5 Vdc (TA = +25°C) (TA =+100°C) IR1 IR2 1.0 15 μA μA CJ 8 pF trr 180 ns RθJL RθJE 18 18 °C/W Maximum Junction Capacitance VR = 100 Vdc, f = 1MHz Maximum Reverse Recovery Time IF = 500mA, IR = 1A, IRR = 250mA, TA = 25°C Typical Thermal Impedance Junction to Lead for Axial, L =.375" Junction to End Tab for Surface Mount Package Outlines: DIMENSIONS (inches) DIM. A B C D Minimum .065 --.047 1.00 DIMENSIONS (inches) Maximum .165 .350 .053 --- AXIAL NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DIM. A B C D Minimum .170 .330 .020 .002 Maximum .180 .380 .030 --- SMS DATA SHEET #: RC0037D DOC