SUM60UF thru SUM90UF and SUM60UFSMS thru SUM90UFSMS Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com Designer’s Data Sheet Part Number/Ordering Information 400 mA ULTRA FAST RECOVERY RECTIFIER 6,000 thru 9,000 VOLTS 70 nsec 1/ SUM __ __ __ │ │ │ │ │ │ │ │ │ └ │ └ Screening 2/ │ __ = Not Screened │ TX = TX Level │ TXV = TXV Level │ S = S Level │ └ Package Type __ = Axial Leaded SMS = Surface Mount Square Tab Voltage/Family 60UF = 6,000V 70UF = 7,000V 80UF = 8,000V 90UF = 9,000V MAXIMUM RATINGS 3/ FEATURES: • • • • • • • • PIV to 9,000 Volts Hermetically sealed axial and square tab surface mount package 4/ Ultra fast recovery 70 nsec maximum Void free construction Metallurgically bonded 175°C maximum operating temperature 2/ TX, TXV, and S-level screening available Also available in fast versions, consult factory 6/ RATING Peak Inverse Voltage SUM60UF and SUM60UFSMS SUM70UF and SUM70UFSMS SUM80UF and SUM80UFSMS SUM90UF and SUM90UFSMS Average Rectified Current Surge Current (1 Cycle) Operating & Storage Temperature 5/ SYMBOL VALUE UNIT PIV 6000 7000 8000 9000 Volts IO1 IO2 400 250 mA IFSM 25 Amps TJ and TSTG -65 to +175 °C TA = 25°C TA = 100°C NOTES: 1/ For ordering information, price, operating curves, and availability- contact factory. 2/ Screening based on MIL-PRF-19500. Screening flows available on request. 3/ Unless otherwise specified, all electrical characteristics @25ºC. 4/ IF = 500mA, IR = 1A, IRR = 250mA, TA = 25°C 5/ Maximum lead/end temperature for soldering is 250°C, 3/8” from case for 5 sec. maximum. 6/ Operating and testing over 10,000 V/inch may require encapsulation or immersion in suitable dielectric material. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. Axial Leaded DATA SHEET #: RC0039E SMS DOC SUM60UF thru SUM90UF and SUM60UFSMS thru SUM90UFSMS Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com ELECTRICAL CHARACTERISTICS 3/ 6/ CHARACTERISTICS Maximum Forward Voltage (300μs pulse minimum) Maximum Reverse Leakage Current (VR = Rated) SYMBOL VALUE UNIT IF = 400 mA VF 15.5 Vdc (TA = +25°C) (TA =+100°C) IR1 IR2 1.0 15 μA μA CJ 8 pF trr 70 ns RθJL RθJE 18 18 °C/W Maximum Junction Capacitance VR = 100 Vdc, f = 1MHz, TA = 25°C Maximum Reverse Recovery Time IF = 500mA, IR = 1A, IRR = 250mA, TA = 25°C Typical Thermal Impedance Junction to Lead for Axial, L =.375" Junction to End Tab for Surface Mount Package Outlines: DIMENSIONS (inches) DIM. A B C D Minimum .065 --.047 1.00 Maximum .165 .350 .053 --- AXIAL NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DIMENSIONS (inches) DIM. A B C D Minimum .170 .330 .020 .002 Maximum .180 .380 .030 --- SMS DATA SHEET #: RC0039E DOC