TIP41C TIP42C Complementary power transistors Features . ■ Complementary PNP-NPN devices ■ New enhanced series ■ High switching speed ■ hFE grouping ■ hFE improved linearity 3 1 Applications ■ General purpose circuits ■ Audio amplifier ■ Power linear and switching 2 TO-220 Figure 1. Internal schematic diagram Description The TIP41C is a base island technology NPN power transistor in TO-220 plastic package that make this device suitable for audio, power linear and switching applications. The complementary PNP type is TIP42C Table 1. Device summary Order code Marking Package Packaging TIP41C (Note 1 on page 4) TIP41C R TIP41C O TIP41C Y TO-220 Tube TIP42C (Note 1 on page 4) TIP42C R TIP42C O TIP42C Y TO-220 Tube November 2007 Rev 2 1/12 www.st.com 12 Contents TIP41C - TIP42C Contents 1 Absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Typical characteristic (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2.2 Test circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 3 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 4 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 2/12 TIP41C - TIP42C 1 Absolute maximum ratings Table 2. Absolute maximum ratings Symbol Parameter Value Unit VCBO Collector-base voltage (IE = 0) 100 V VCEO Collector-emitter voltage (IB = 0) 100 V VEBO Emitte-base voltage (IC = 0) 5 V Collector current 6 A Collector peak current (tP < 5ms) 10 A Base current 3 A PTOT Total dissipation at Tcase = 25°C 65 W Tstg Storage temperature -65 to 150 °C 150 °C IC ICM IB TJ Note: Absolute maximum ratings Max. operating junction temperature For PNP types voltage and current values are negative 3/12 Electrical characteristics 2 TIP41C - TIP42C Electrical characteristics (Tcase = 25°C; unless otherwise specified) Table 3. Symbol Electrical characteristics Parameter Test conditions Min. Typ. Max. Unit ICEO Collector cut-off current (IB = 0) VCE = 60 V 0.7 mA IEBO Emitter cut-off current (IC = 0) VEB = 5 V 1 mA ICES Collector cut-off current (VBE = 0) VCE = 100 V 0.4 mA Collector-emitter sustaining voltage (IB = 0) IC = 30 mA VCE(sat)(1) Collector-emitter saturation voltage IC = 6 A __ IB = 0.6 A 1.5 V VBE(on)(1) Base-emitter voltage IC = 6 A ___ VCE = 4 V 2 V IC = 0.3 A_ _ VCE = 4 V IC = 3 A ____ VCE = 4 V VCEO(sus)(1) hFE(1) DC current gain Group R Group O Group Y 100 30 15 15 24 42 V 75 28 44 75 1. Pulsed duration = 300 ms, duty cycle ≥1.5%. Note: Note: 4/12 1 Product is pre-selected in DC current gain (group R, group O and group Y). STMicroelectronics reserves the right to ship either groups according to production availability. Please contact your nearest STMicroelectronics sales office for delivery details. For PNP types voltage e current values are negative. TIP41C - TIP42C 2.1 Electrical characteristics Typical characteristic (curves) Figure 2. DC current gain (NPN) Figure 3. DC current gain (PNP) Figure 4. DC current gain (NPN) Figure 5. DC current gain (PNP) Figure 6. Collector-emitter saturation voltage (NPN) Figure 7. Collector-emitter saturation voltage (PNP) 5/12 Electrical characteristics Figure 8. Base-emitter saturation voltage (NPN) Figure 10. Base-emitter voltage (NPN) TIP41C - TIP42C Figure 9. Base-emitter saturation voltage (PNP) Figure 11. Base-emitter voltage (PNP) Figure 12. Resistive load switching time Figure 13. Resistive load switching time (NPN) (PNP) 6/12 TIP41C - TIP42C Electrical characteristics Figure 14. Resistive load switching time Figure 15. Resistive load switching time (NPN) (PNP) Figure 16. Collector-base and collector- Figure 17. Collector-base and collectoremitter capacitance (NPN) emitter capacitance (PNP) 7/12 Electrical characteristics 2.2 Test circuit Figure 18. Inductive load switching test circuit 1) Fast electronic switch 2) Non-inductive resistor 3) Fast recovery rectifier Figure 19. Resistive load switching test circuit 1) Fast electronic switch 2) Non-inductive resistor Note: 8/12 For PNP types voltage e current values are negative. TIP41C - TIP42C TIP41C - TIP42C 3 Package mechanical data Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 9/12 Package mechanical data TIP41C - TIP42C TO-220 mechanical data mm inch Dim Min A b b1 c D D1 E e e1 F H1 J1 L L1 L20 L30 ∅P Q 10/12 Typ 4.40 0.61 1.14 0.49 15.25 Max Min 4.60 0.88 1.70 0.70 15.75 0.173 0.024 0.044 0.019 0.6 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 1.27 10 2.40 4.95 1.23 6.20 2.40 13 3.50 Max 0.181 0.034 0.066 0.027 0.62 0.050 16.40 28.90 3.75 2.65 Typ 0.409 0.106 0.202 0.051 0.256 0.107 0.551 0.154 0.645 1.137 3.85 2.95 0.147 0.104 0.151 0.116 TIP41C - TIP42C 4 Revision history Revision history Table 4. Document revision history Date Revision Changes 24-Oct-2006 1 Initial release 19-Nov-2007 2 Content reworked to improve readability, no technical changes 11/12 TIP41C - TIP42C Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 12/12