Modules Accessories for Modules fc BB-100 Baseboard for 1x TMCM-100 + 1x TMCM-035 The BB-100 is designed for the TMCM-100 sophisticated stepper controller to control a TMCM-035 (SG) driver. All important signal and power lines are accessible via screw terminals. The integrated switch-mode regulator provides the required 5V supply voltage for the modules. The integrated level shifter enables direct connection to a PC via RS-232 cable (RS-485 or CAN optionally). ORDER CODE DESCRIPTION BB-100 (-option) baseboard for TMCM-100 & TMCM-035 Features 1 slot for the TMCM-100 motion control module and one slot for a TMCM-035 power driver 256 microstep motor driver resolution integrated 5V power supply protection: Overvoltage suppressor and inverse polarity Electrical data 15V to 50V DC supply voltage Interface all options of the TMCM100 are supported 2 x limit switch, 4 general purpose digital/analog in, 4 general purpose digital out Others screw terminal connectors for I/O signals size: 100x65mm², 60mm height OPTION - 232 RS-232 Interface (standard) - 485 RS-485 interface (on request) - CAN CAN interface (standard) For further detailed information and datasheets please refer to our website http://www.trinamic.com. 38