UNISONIC TECHNOLOGIES CO., LTD 9013 NPN EPITAXIAL SILICON TRANSISTOR 1W OUTPUT AMPLIFIER OF POTABLE RADIOS IN CLASS B PUSH-PULL OPERATION FEATURES 1 * High total power dissipation. (625mW) * High collector current. (500mA) * Excellent hFE linearity. * Complementary to UTC 9012 TO-92 ORDERING INFORMATION Ordering Number Normal Lead Free Halogen Free 9013-x-T92-B 9013L-x-T92-B 9013G-x-T92-B 9013-x-T92-K 9013L-x-T92-K 9013G-x-T92-K 9013-x-T92-R 9013L-x-T92-R 9013G-x-T92-R Note: xx: Output Voltage, refer to Marking Information. www.unisonic.com.tw Copyright © 2011 Unisonic Technologies Co., LTD Package TO-92 TO-92 TO-92 Pin Assignment 1 2 3 E B C E B C E B C Packing Tape Box Bulk Tape Reel 1 of 2 QW-R201-030.Ba 9013 NPN EPITAXIAL SILICON TRANSISTOR ABSOLUTE MAXIMUM RATING (Ta=25℃, unless otherwise specified) PARAMETER SYMBOL RATINGS UNIT Collector-base voltage VCBO 40 V Collector-emitter voltage VCEO 20 V Emitter-base voltage VEBO 5 V Collector current IC 500 mA Collector dissipation PC 625 mW Junction Temperature TJ 125 ℃ Storage Temperature TSTG -55 ~ +150 ℃ Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. ELECTRICAL CHARACTERISTICS (Ta=25℃, unless otherwise specified) PARAMETER Collector-base breakdown voltage Collector-emitter breakdown voltage Emitter-base breakdown voltage Collector cutoff current Emitter cutoff current DC current gain Collector-emitter saturation voltage Base-emitter saturation voltage Base-emitter on voltage SYMBOL BVCBO BVCEO BVEBO ICBO IEBO hFE1 hFE2 VCE(sat) VBE(sat) VBE(on) TEST CONDITIONS IC=-100μA, IE=0 IC=1mA, IB=0 IE=100μA, IC=0 VCB=25V, IE=0 VEB=3V, IC=0 VCE=1V, IC=50mA VCE=1V, IC=500mA IC=-500mA, IB=-50mA IC=-500mA, IB=-50mA VCE=1V, IC=10mA MIN 40 20 5 64 40 0.6 TYP 120 120 0.16 0.91 0.67 MAX 100 100 300 0.6 1.2 0.7 UNIT V V V nA nA V V V CLASSIFICATION OF hFE1 RANK RANGE D 64-91 E 78-112 F 96-135 G 112-166 H 144-202 I 190-300 UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 2 QW-R201-030.Ba