CLV6115A-LF PHASE NOISE (1 Hz BW, typical) Rev C3 Voltage-Controlled Oscillator Surface Mount Module Applications • Base-stations • Satellite Communications • £(f) (dBc/Hz) 14118 Stowe Drive, Suite B | Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 5940 Typ Phase Noise @ 10 kHz offset (1 Hz BW) -85 Harmonic Suppression (2nd) -30 Tuning Voltage 0.5 Max Units 6308 MHz dBc/Hz -24 dBc 8 Vdc MHz/V 128 Tuning Sensitivity (avg.) 6 dBm Input Capacitance 10 pF Pushing 6 MHz/V Pulling (14 dB Return Loss, Any Phase) 13 MHz 85 °C Max Units Power Output 0 Load Impedance Operating Temperature Range 50 -40 Package Style Power Supply Requirements 3 MINI-16HL-SM Min Typ Supply Voltage (Vcc, nom.) 8 Supply Current (Icc) 14 Vdc 18 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B CLV6115A-LF Voltage-Controlled Oscillator Surface Mount Module Rev C3 FREQUENCY (MHz) Tuning Curve, typ. 6480 6420 6360 6300 6240 6180 6120 6060 6000 5940 5880 5820 5760 5700 5640 5580 5520 5460 85 °C 25 °C -40 °C 0 1 2 3 4 5 6 7 8 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT 8 SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 7 6 5 4 3 0.030 MIN. CUTBACK FROM LIVE PADS 2 1 0 5566 5686 5798 5919 6058 6181 6283 6369 6427 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions SOLDER MASK GOLD PLATED PADS PIN CONFIGURATION BOTTOM Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B