General Purpose Relays PCB Relays SCHRACK Miniature PCB Relay PE bistable n1pole 5 A, polarized bistable version form C (CO) or 1 form A (NO) contact nSensitive version with 200mW coil nAmbient temperature 70°C nLow height 10.0mm nPlastic materials according to IEC 60335-1 (domestic appliances) n1 F0221-B Typical applications Room thermostats, electricity meters, home automation, white goods, battery powered controls Approvals Coil Data VDE REG.-Nr. 6656 (for AgNi90/10 contacts only), UL E214025 Technical data of approved types on request Contact Data Contact arrangement 1 form C (CO) or 1 form A (NO) Rated voltage 250VAC Max. switching voltage 400VAC Rated current 5A Breaking capacity max. 1250VA Contact material AgNi 90/10, AgSnO2 Frequency of operation, with/without load 360/72000 ops/h Set/reset time typ. 8/8ms Bounce time, form A/form B 4/7ms Contact ratings Type Contact Load IEC 61810 PE014 C (CO) 5A, 250VAC, cosφ=1, 85°C PE014 A (NO) 5A, 30VDC, 0 ms, 85°C UL 508 PE013 C (CO) 5A, 240VAC, resistive, 85°C PE033 N (NO) 5A, 240VAC, resistive, 85°C PE014 C/A/B 5A, 240VAC, resistive, 85°C Mechanical endurance >5x106 operations. 04-2011, Rev. 0411 www.te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company VZ Cycles 100x103 100x103 30x103 50x103 100x103 Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Magnetic system bistable, polarized Coil voltage range 2.2 to 48VDC Operative range, IEC 61810 2 Reset voltage max., % of rated coil voltage 120% at -40°C Min./Max. energization duration20ms1)/1min at <10% duty factor 1) Information on reduced pulse duration with higher energization voltages on demand. Coil versions, bistable 1 coil Coil Rated Set Reset Coil Rated coil code2) voltage voltage voltage resistance power VDC VDC VDC Ω±10% mW F02 H02 2.2 1.65 1.65 22 220 F03 H03 3 2.25 2.25 41 220 F05 H05 5 3.75 3.75 125 200 F06 H06 6 4.5 4.5 180 200 F12 H12 12 9.0 9.0 650 222 F24 H24 24 18.0 18.0 2750 209 2) Coil codes F.. and H..have opposite polarity; refer to coil operation table. All figures are given for coil without pre-energization, at ambient temperature +23°C. Other coil voltages on request. Coils - operation Version F.. Coil terminals A1 A2 Operate + - Reset - + Contact position not defined at delivery Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions A1 - + H.. A2 + - Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 1 General Purpose Relays PCB Relays SCHRACK Miniature PCB Relay PE bistable (Continued) Insulation Data Other Data Initial dielectric strength between open contacts between contact and coil Initial insulation resistance open contact circuit coil-contact circuit Clearance/creepage between contact and coil Material group of insulation parts Tracking index of relay base Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Resistance to heat and fire according EN60335, par.30 Ambient temperature -40 to 85°C 70°C at 100% duty factor Category of environmental protection IEC 61810 RTII - flux proof (RTIII - wash tight on request) Shock resistance (destructive) >100g Terminal type PCB-THT Resistance to soldering heat THT IEC 60068-2-20 270°C/10s (flux proof version) Packaging/unit tube/25 pcs., box/500 pcs. 1000Vrms 4000Vrms >10x109Ω >10x109Ω ≥3.2/4mm IIIa PTI250V PCB layout / terminal assignment Bottom view on solder pins Dimensions 1 form C (CO) version 1 form A (NO) version S0271-AA S0176-BA S0176-BC S0176-BR S0176-BS Product code structure Type PE Miniature PCB Relay PE bistable Version 0 Flux proof Contact configuration 1 1 form C (CO) contact Contact material 4 AgNi 90/10 Coil Coil code: please refer to coil versions table 2 Product code PE Typical product code Version 3 1 form A (NO) contact 3 AgSnO2 Contacts Contact material Coil PE014F02 flux proof 1 form C AgNi 90/10 bistable PE014F03 1 CO contact 1-coil PE014F05 polarity F PE014F06 200mW PE014F12 PE014F24 PE014H02 bistable PE014H03 1-coil PE014H05 polarity H PE014H06 200mW PE014H12 PE014H24 04-2011, Rev. 0411 www.te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions 0 1 4 F12 Part number 9-1415389-1 1415390-1 1-1415390-1 2-1415390-1 3-1415390-1 5-1415390-1 7-1415390-1 8-1415390-1 9-1415390-1 1415391-1 1-1415391-1 2-1415391-1 Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change.