V585ME73-LF PHASE NOISE (1 Hz BW, typical) Rev B2 Voltage-Controlled Oscillator Surface Mount Module Applications • Test Equipments • Digital Radios • £(f) (dBc/Hz) 14118 Stowe Drive, Suite B | Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 600 Typ Phase Noise @ 10 kHz offset (1 Hz BW) -100 Harmonic Suppression (2nd) -12 Tuning Voltage 0 Max Units 1200 MHz dBc/Hz -10 dBc 13 Vdc MHz/V 58 Tuning Sensitivity (avg.) 10 dBm 150 pF Pushing 3 MHz/V Pulling (14 dB Return Loss, Any Phase) 7 MHz 85 °C Max Units Power Output 7 Load Impedance 8.5 50 Input Capacitance Operating Temperature Range -40 Package Style Power Supply Requirements MINI-16-SM Min Typ Supply Voltage (Vcc, nom.) 10 Supply Current (Icc) 18 Vdc 24 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B V585ME73-LF Voltage-Controlled Oscillator Surface Mount Module Rev B2 Tuning Curve, typ. FREQUENCY (MHz) 1340 1280 1220 1160 1100 1040 980 920 860 800 740 680 620 560 500 85 °C 25 °C -40 °C 0 1 2 3 4 5 6 7 8 9 10 11 12 13 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 11 10 9 8 7 0.030 MIN. CUTBACK FROM LIVE PADS 6 5 4 3 528 623 693 754 814 871 926 980 1033 1084 1134 1183 1230 1277 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions SOLDER MASK GOLD PLATED PADS PIN CONFIGURATION BOTTOM Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B