V350ME12-LF PHASE NOISE (1 Hz BW, typical) Rev C3 Voltage-Controlled Oscillator Surface Mount Module Applications • Base stations • Microwave Radios • £(f) (dBc/Hz) 14118 Stowe Drive, Suite B | Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 200 Typ Phase Noise @ 10 kHz offset (1 Hz BW) -109 Harmonic Suppression (2nd) -10 Tuning Voltage 0.5 Max Units 350 MHz dBc/Hz -6 dBc 12 Vdc MHz/V 14 Tuning Sensitivity (avg.) 10 dBm 250 pF Pushing 3 MHz/V Pulling (14 dB Return Loss, Any Phase) .1 MHz 85 °C Max Units Power Output 0 Load Impedance 5 50 Input Capacitance Operating Temperature Range -40 Package Style Power Supply Requirements MINI-16-SM Min Typ Supply Voltage (Vcc, nom.) 5 Supply Current (Icc) 15 Vdc 19 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B V350ME12-LF Voltage-Controlled Oscillator Surface Mount Module Rev C3 Tuning Curve, typ. FREQUENCY (MHz) 370 350 330 310 85 °C 25 °C 290 270 250 -40 °C 230 210 190 170 0 1 2 3 4 5 6 7 8 9 10 11 12 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 12 10 8 6 4 0.030 MIN. CUTBACK FROM LIVE PADS 2 0 -2 179 201 219 234 248 262 276 290 304 319 333 347 360 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions SOLDER MASK GOLD PLATED PADS PIN CONFIGURATION BOTTOM Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B