SMV1087A-LF PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • Microwave Radio • Test Equipment £(f) (dBc/Hz) 14118 Stowe Drive, Suite B Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] • Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 969 Typ Phase Noise @ 10 kHz offset (1 Hz BW) -95 Harmonic Suppression (2nd) -13 Tuning Voltage 1.8 Max Units 1206 MHz dBc/Hz -10 dBc 4.2 Vdc MHz/V 160 Tuning Sensitivity (avg.) 11 dBm Input Capacitance 50 pF Pushing 10 MHz/V Pulling (20. dB Return Loss, Any Phase) 10 MHz 85 °C Max Units Power Output 5 Load Impedance Operating Temperature Range 50 -40 Package Style Power Supply Requirements 8 SUB-L Min Typ Supply Voltage (Vcc, nom.) 5 Supply Current (Icc) 26 Vdc 31 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B Voltage-Controlled Oscillator Surface Mount Module SMV1087A-LF Rev A1 Tuning Curve, typ. 1300 FREQUENCY (MHz) 1250 1200 1150 1100 85 °C 25 °C 1050 1000 950 -40 °C 900 850 800 750 700 0 0.6 1.2 1.8 2.4 3 3.6 4.2 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint 14 13 RECOMMENDED FOOTPRINT 12 SEVERAL HOLES OF O0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 11 10 9 8 7 6 5 0.030 MIN. CUTBACK FROM LIVE PADS 4 3 2 1 0 747 798 855 921 1002 1098 1192 1272 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF Out Vcc GROUND PACKAGE H SUB MINI 0.110 SUB MINI-L 0.080 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B