V590ME09-LF PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • Test Equipment • Microwave Radio Systems £(f) (dBc/Hz) 14118 Stowe Drive, Suite B Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] • Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 850 Typ Phase Noise @ 10 kHz offset (1 Hz BW) -100 Harmonic Suppression (2nd) -13 Tuning Voltage 0.5 Max Units 1050 MHz dBc/Hz -10 dBc 5 Vdc MHz/V 63 Tuning Sensitivity (avg.) 9 dBm 150 pF Pushing 2 MHz/V Pulling (12 dB Return Loss, Any Phase) 8 MHz 70 °C Max Units Power Output 2 Load Impedance 5.5 50 Input Capacitance Operating Temperature Range -20 Package Style Power Supply Requirements MINI-14S Min Typ Supply Voltage (Vcc, nom.) 5 Supply Current (Icc) 15 Vdc 20 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B Voltage-Controlled Oscillator Surface Mount Module V590ME09-LF Rev A1 Tuning Curve, typ. 1120 FREQUENCY (MHz) 1080 1040 1000 70 °C 25 °C 960 920 880 -20 °C 840 800 760 720 680 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT 12 SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 10 8 6 0.030 MIN. CUTBACK FROM LIVE PADS 4 2 0 705 759 805 848 886 922 955 987 1017 1047 1075 FREQUENCY (MHz) 70 °C 25 °C -20 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND PACKAGE H MINI-14S 0.220 MINI-14S-LOW 0.160 MINI-14S-L 0.130 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B