RF Filter 100 KHZ to 5.0 GHz Single in line package The content of this specification may change without notification 09/18/08 Wide Band RF Eliminate Filter KHLC-04s Feature ⋅ Single in Line Package ⋅ Broad Bandwidth: 100 kHz to 5.0 GHz (-20 dB) ⋅ Comply with Large Current (1.5 A) Nowadays, the digital clock signal which is used as high frequency applications makes the harmonic wave delivered to the DC power supplies extend the frequency range in GHz with one digit to two digits. Under this circumstance in performing a digital signal in high speed transmission, only the conventional method like using a bypass capacitor can not remove high harmonic wave which is transmitted to the power supplies. This power filter KHLC-04s deletes harmonic wave signal which is not necessary to be transmitted to the very broad bandwidth of 100 kHz to 5 GHz (-20 dB). The package is designed in single in line package where IC and other chips can be mounted near the power supply terminals (pins), and this makes it possible for ideal mounting position electrically. Isolation vs Frequency 0 -10 -20 -30 -40 -50 -60 -70 1M 10G Frequency [ Hz ] Electrical Specifications Absolute Maximum Rating Value (max.) Unit Rated Current 1,500 mA Rated Voltage 10 V +240 (8 sec) C Operating Temperature −40 ~ +85 C Storage Temperature −65 ~ +150 C Parameter Soldering Temperature Band Width Condition −20 dB 280 kHz ~ 3.8 GHz (Typ.) −30 dB 350 kHz ~ 1.2 GHz (Typ.) −40 dB 0.13 Ω max. − DC Resistance Dimensions Schematics Value 100 kHz ~ 5.0 GHz (Typ.) Parameter UNIT : mm 4.0 Lo KF2 3 C1 Cp2 1 2 3 Cp3 3.5 Cp1 4.3 KF1 1 2 1.8 ± 0.05 1.27 1: Vcc (IN) 2: GND 3: Vcc (OUT) 0.4 Specifications of products are subject to change without notice. American Accurate Components, Inc. 0.15 188 Technology Drive, Unit H, Irvine, CA 92618 TEL: 949-453-9888 FAX: 949-453-8889