ADL USB-DIO-32

PC/104 – USB I/O
USB-DIO-32 - Buffered Digital I/O, Three Counter/Timers
FEATURES
•
High-speed USB 2.0 device, USB 1.1 compatible
•
Small, portable 32-channel digital I/O module
•
Four 8-bit ports independently selectable for inputs or outputs
•
All 32 I/O lines buffered with Sink 64mA / Source 32mA current capabilities
•
Removable screw terminal adaptor for easy wiring
•
Standard 50-pin IDC connector with key
•
Custom high-speed function driver
•
PC/104 module size and mounting compatibility
•
Small (4" x 4" x 1.25") rugged industrial enclosure
FACTORY OPTIONS
•
Three 82C54 counter/timers
•
External power for high current capabilities
•
DIN rail mounting provision
•
Economy "E" version also available without the screw terminal board
•
OEM (board only) version with PC/104 mounting holes and PCB footprint for
added flexibility in embedded applications
FUNCTIONAL DESCRIPTION
The USB-DIO-32 is an ideal solution for adding portable, easy-to-install digital I/O and counter capabilities to any computer with a USB port. The USB-DIO-32
is a USB 2.0 high-speed device, offering the highest speed available with the USB bus. It is fully compatible with both USB 1.1 and USB 2.0 ports. The unit is
plug-and-play allowing quick connect or disconnect whenever you need additional I/O on your USB port.
The USB-DIO-32 features 32 bits of TTL-compatible digital I/O with high-current capabilities and three optional 82C54 counters. Each digital port can be programmed to accept inputs or to drive outputs on four 8-bit ports, designated as port A, B, C, and D. Power is supplied to the board via the USB cable or for
higher current capabilities, external power may be used. The I/O wiring connections for USB-DIO-32 are via an industry standard 50-pin connector. For external circuits, fused +5VDC power is available at the connector. This resettable fuse is rated at 0.5A.
All I/O lines are buffered by a type 74ABT245 tri-state buffer transceiver capable of sinking 64 mA or sourcing 32 mA. The buffers are configured under program control for input or output. Jumper selectable pull-ups (to +5 VDC) or pull-downs (to ground) on the board allow for contact monitoring and assure that
there are no erroneous outputs at power-up until the board is initialized by system software.
The USB-DIO-32 is designed to be used in rugged industrial environments but is small enough to fit nicely onto any desk or testing station. The board is
PC/104 sized (3.550 by 3.775 inches) and ships inside a steel powder-coated enclosure with an anti-skid bottom.
COUNTER/TIMERS
Three 82C54 chips each include three 16-bit counter/timers factory configured in an optimal module for use as event counters, frequency output, pulse width,
and frequency measurement (see the Block Diagram).
OEM USB/104 FORM FACTOR
The OEM (board only) version is perfect for a variety of embedded applications. What makes the OEM option unique is that its PCB size and mounting holes
match the PC/104 form factor (without the bus connections). This allows our rugged digital board to be added to any PCI-104 or PC/104 stack by connecting it
to a simple USB port usually included on-board with embedded CPU form factors such as EBX, EPIC, and PC/104. This is especially important since many
newer CPU chipsets do not support ISA and have plenty of USB ports. The USB-DIO-32 OEM board can also be installed using standoffs inside other enclosures or systems.
ACCESSORIES
The USB-DIO-32 is available with optional cable assemblies and screw terminal board. The pin connections are also compatible with industry standard I/O
racks such as ACCES A24A, OPTO22, Gordos, Potter & Brumfield, etc. with optional cable.
SOFTWARE
The USB-DIO-32 is plug-and-play which allows quick connect or disconnect whenever you need additional I/O on your USB port. The module utilizes a highspeed custom function driver optimized for a maximum data throughput that is 50-100 times faster than the USB human interface device (HID) driver used by
many competing products. This approach maximizes the full functionality of the hardware along with capitalizing the advantage of high-speed USB 2.0. The
USB-DIO-32 is supported for use in most USB supported operating systems and includes a free Linux and Windows 98se/Me/2000/XP/2003 compatible software package. This package contains sample programs and source code in Visual Basic, Delphi, C++ Builder, and Visual C++ for Windows. Also incorporated
is a graphical setup program in Windows. Third party support includes a Windows standard DLL interface usable from the most popular application programs.
Embedded OS support include Windows XPe.
Advanced Digital Logic, Inc.; 4411 Morena Blvd., Suite 101; San Diego, CA 92117-4345
Ph. 858 490-0597 F. 858 490-0599; e-mail: [email protected]; web: www.adl-usa.com
PC/104 – USB I/O
BLOCK DIAGRAM
CONNECTOR PIN ASSIGNMENTS
USB-DIO-32 has a 50-pin connector
.
provided for I/O connections
Advanced Digital Logic, Inc.; 4411 Morena Blvd., Suite 101; San Diego, CA 92117-4345
Ph. 858 490-0597 F. 858 490-0599; e-mail: [email protected]; web: www.adl-usa.com
PC/104 – USB I/O
Specifications
Digital Inputs (TTL Compatible)
Logic High:
2.0 to 5.0 VDC
Logic Low:
-0.5 to +0.8 VDC
Digital Outputs
Logic High:
2.0 VDC minimum source 32 mA
Logic Low:
0.55 VDC maximum sink 64 mA
Optional Counter/Timers
Type:
82C54-10 programmable interval counters
Output Drive:
2.0 VDC minimum source 32 mA
0.55 VDC maximum
Input Gate:
TTL/CMOS compatible
Clock:
On-board
Active Count Edge:
Negative Edge
Minimum Clock Pulse Width:
30 nS high 40 nS low
Timer Range:
16 bits
Maximum Input Frequency:
10MHz
Bus Type
USB 2.0 High-speed
USB 1.1 Full-speed compatible
Environmental
Operating Temperature Range:
0° to 70°C (extended temp available)
Storage Temperature Range:
-40° to +85°C
Humidity:
5% - 95%, non-condensing
Board Dimension:
3.550 x 3.775 inches
Box Dimension:
4.00 x 4.00 x 1.25 inches
Power
+5VDC provided via USB bus up to 500mA**
Basic Unit with Three Counters: 100mA typical (no load)
+5VDC resettable fuse at 0.5A located on connector
** Optional on-board external power circuitry and AC/DC adapter can be ordered (“-P” option) if current use is expected to be greater than what can be supplied by the USB bus.
Please check to see how much current your USB port can supply and how much current you anticipate using.
Ordering Guide
USB-DIO-32
Enclosure, module and screw terminal board
Options
-OEM
Board only version (no enclosure and screw terminal board)
-E
Economy model (no screw terminal board)
-DIN
DIN rail mounting provision
-P
External power and AC/DC adapter
-Cx
Number of counters (where x = 1, 2 or 3 counters)
Accessories
UTBK-50
External plug-in screw terminal board
Advanced Digital Logic, Inc.; 4411 Morena Blvd., Suite 101; San Diego, CA 92117-4345
Ph. 858 490-0597 F. 858 490-0599; e-mail: [email protected]; web: www.adl-usa.com