cPCIS-6400X Series 4U 5-slot CompactPCI® Chassis with 400 W Power Supply Features 6U cPCI Platforms Standard 6U CompactPCI® and PICMG® 2.5 H.110 CT Bus PICMG® 2.1 Hot Swap compliant 32-bit or 64-bit 5-slot CompactPCI® backplane with P3 & P5 rear I/O Built-in 400 W AC-input ATX power supply Built-in slim type optical drive Dual-removable SATA HDD racks Guarded power switch and reset button Redundant cooling architecture Specifications Enclosure CompactPCI® Standards Form Factor Backplane EIA RS-310C 19” 4U high rackmount enclosure Coated metal plate outer covering 2.0 R3.0, 2.1 R2.0, 2.5 R1.0 6U CompactPCI® cBP-6405R: 5-slot 64-bit 66 MHz 6U cPCI CT Bus Backplane Power Supply APS940XA: 400 W ATX power supply with cooling fan AC Input Auto range, 90-130 V AC and 180-260 V AC 47-63 Hz DC Output 35 A @ +5 V, 25 A @ +3.3 V, 30 A @ +12 V, 1A @ -12 V (+5 Vsb and -5 V are not used in cPCI system) The total output current of the 5 V & 3.3 V source must not exceed 45 A Maximum total output for all DC: 400 W Efficiency: 65% at 115 V, full load Protection Over load protection: 110%-140% Over voltage protection on +5 V Short circuit protection: each voltage output Over temperature protection: 70 De-rating De-rating temperature: 40 De-rating rate: 20 Certifications UL 1950/ CSA22.2 No.234 TUV EN-60950 “B” IEC-801-2, 3, 4, 5 FCC part 15 Class A, CISPR 22 (EN55022) Basic Alarm Module Monitors inner chassis temperature and fan status Abnormal status will generate alarm and LED warning Alarm reset LEDs indicate status of 5 V, 3.3 V, 12 V, and -12 V 3-11 http://www.adlinktech.com/cPCI/ Cooling System Drive Bay Dimensions Weight Operating Temp. Storage Temp. Humidity Shock Vibration NEBS Front-access hot-swappable fan tray for ventilation: • 12 V DC brushless, dual ball bearing • One fan for intake and one fan for ventilation with 51 CFM each • Rated speed for each fan: 3600 ±250 RPM • Rated power for each fan: 2.8 W Rear-access hot-swappable fan modules for drive bays: • 12 V DC brushless, VAPO bearing • Three 10.8 CFM fan modules for ventilation • Rated speed for each fan: 8200 ±1000 RPM • Rated power for each fan: 1.6 W Built-in slim type optical drive Dual removable 3.5” SATA HDD racks 482.6 x 177.0 x 350.6 (mm, W x H x D, w/ handle) 14.5 kg/32 lbs (including power supply and backplane) 0˚C to 55˚C (dependent on system configuration) -20˚C to 80˚C 5% to 95%, non-condensing 15 G peak-to-peak, 11 ms duration, non-operation Non-operation: 1.88 Grms, 5-500 Hz, each axis Operation: 0.5 Grms, 5-500 Hz, each axis, tested with 2.5” HDD Designed for NEBS Level 3 Recommended Configurations CPU Board (System slot) Rear I/O Board cPCI-6510, cPCI-6510V cPCI-R6002D*, cPCI-R6110*, cPCI-6200*, cPCI-R6700D cPCI-6880, cPCI-6880P cPCI-R6002D*, cPCI-R6110*, cPCI-6200*, cPCI-R6700D cPCI-6210, cPCI-6210D cPCI-R6002D*, cPCI-R6110*, cPCI-6200*, cPCI-R6700D *A 22-pin to 7-pin SATA cable is required for connecting the 3rd SATA interface Ordering Information Model Number cPCI Bus PSU Type CMM PSU MAX AC-INPUT H.110 CD/DVD ROM 2.5 HDD Rack 3.5 HDD Rack 5.25 HDD Rack Alarm Board cPCIS-6400XA/ SDVD 64-bit/66MHz ATX -- 400W 1 Y 1x SATA DVD -- 2x SATA -- Basic Alarm Module Mechanical Layout Rear View Two HDD Racks Slim Type Optical Drive Hot-swappable Fan Tray for exhaust Hot-swappable Fan Tray for intake with filter Replaceable Fan Tray for exhaust ATX Power Supply Unit 3-12