RoHS PCSLF1275 Power Chip Shielded Inductors Dimensions: Inches (mm) Allied Part Number Inductance (uH) Tolerance (%) Test Freq. KHz,0.5v DCR (Ω) ±20% IDC (A) Itemp (A) Max. PCSLF1275-1R2T-RC 1.2 30 1 .007 13 8.2 PCSLF1275-2R7T-RC 2.7 30 1 .009 10 7.0 PCSLF1275-3R9T-RC 3.9 30 1 .010 9.0 6.7 PCSLF1275-4R7T-RC 4.7 30 1 .011 7.8 6.3 PCSLF1275-5R6T-RC 5.6 30 1 .012 7.8 6.3 PCSLF1275-6R8T-RC 6.8 30 1 .013 7.2 5.9 PCSLF1275-100M-RC 10 20 1 .016 5.5 5.4 PCSLF1275-150M-RC 15 20 1 .018 4.7 5.0 PCSLF1275-220M-RC 22 20 1 .026 4.0 4.0 PCSLF1275-330M-RC 33 20 1 .039 3.2 3.4 PCSLF1275-470M-RC 47 20 1 .053 2.7 3.0 (RDC): Chen Hwa 502BC PCSLF1275-680M-RC 68 20 1 .078 2.0 2.4 (IDC): HP4284A + HP42841A / Chen Hwa 1061 + 301A PCSLF1275-101M-RC 100 20 1 .125 1.9 1.9 PCSLF1275-151M-RC 150 20 1 .175 1.5 1.6 PCSLF1275-221M-RC 220 20 1 .258 1.3 1.3 PCSLF1275-331M-RC 330 20 1 .340 0.9 Features • • • • Shielded SMD Power Inductor Suitable for high current applications Low Profile Low Power loss and High current Electrical Inductance Range: 1.2µH to 330µH Tolerance: 30% up to 6.8µh, 20% from 10µh and above, tighter tolerances available Operating Temp: -40ºC ~ +85ºC IDC: Current at which inductance drops by 10% of intial value Itemp current: Value obtained when current flows and the temperature has risen by 40ºC Resistance to Soldering Heat Pre-Heat 150ºC, 1 minute. Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260ºC ± 5ºC for 10 sec. ± 1 sec. Test Equipment (L): HP 4192A Physical Packaging: 350 pieces per 13 inch reel. Marking: EIA Inductance Code All specifications subject to change without notice. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 12/19/08 15 www.alliedcomponents.com