RoHS PCSLF1265 Power Chip Shielded Inductors Dimensions: Allied Part Number Features • • • • Shielded SMD Power Inductor Suitable for high current applications Low Profile Low Power loss and High current Electrical Inductance Range: 2µH to 220µH Tolerance: 30% up to 7.0µh, 20% from 10µh and above, tighter tolerances available Operating Temp: -40ºC ~ +85ºC IDC: Current at which inductance drops by 10% of intial value Itemp current: Value obtained when current flows and the temperature has risen by 40ºC Resistance to Soldering Heat Pre-Heat 150ºC, 1 minute. Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260ºC ± 5ºC for 10 sec. ± 1 sec. Inches (mm) Inductance (uH) Tolerance (%) Test Freq. KHz,0.5v DCR (Ω) ±20% IDC (A) Itemp (A) Max. PCSLF1265-2R0T-RC 2.0 30 1 .012 10 6.2 PCSLF1265-4R2T-RC 4.2 30 1 .015 7.3 5.5 PCSLF1265-7R0T-RC 7.0 30 1 .018 5.7 5.0 PCSLF1265-100T-RC 10 30 1 .020 5.0 4.8 PCSLF1265-150M-RC 15 20 1 .024 4.2 4.4 PCSLF1265-220M-RC 22 20 1 .032 3.5 3.8 PCSLF1265-330M-RC 33 20 1 .041 2.8 3.4 PCSLF1265-470M-RC 47 20 1 .058 2.4 2.8 PCSLF1265-680M-RC 68 20 1 .079 2.0 2.4 PCSLF1265-101M-RC 100 20 1 .123 1.6 1.9 PCSLF1265-221M-RC 220 20 1 .273 1.0 1.2 Test Equipment (L): HP 4192A All specifications subject to change without notice. (RDC): Chen Hwa 502BC (IDC): HP4284A + HP42841A / Chen Hwa 1061 + 301A Physical Packaging: 500 pieces per 13 inch reel. Marking: EIA Inductance Code 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 12/19/08 15 www.alliedcomponents.com