revision for dwg # 1PB-2ALPxLB-yyy 5 8 6 rev ch.no. - - description original design date 11/1/2007 revised by Philipp E. 1 max. 6 mm [.25 in] 37 mm [1.5 in] 24.4 mm [1.0 in] 3 Up to four switch contacts can be installed. 61 mm [2.4 in] 5 85 mm [3.4 in] 18 mm [.7 in] 7 4 2 ITEM DESCRIPTION max. 6 mm [.25 in] 37 mm [1.5 in] 50 mm [2.0 in] 74 mm [2.9 in] 98 mm [3.9 in] For maintained action use Cat. No. 2PPM * = Selector Switch is supplied with mounting bracket, bulb holder and LED (ITEM 1,2,3,4 and 5) ** = Switch Contacts must be ordered separatly unless otherwise specified: all dimensions are in millimeters third angle projection tolerance XX XX.X XX.XX ALL = = = = ±1 mm ±0.5 mm ±0.2 mm − mm This Drawing is the property of R M E T R I C 35 Royal Road Flemington, NJ 08822-6000 (908) 806-9400 Fax (908) 806-9490 012 024 048 110 230 230D yyy = Voltage = 12V AC/DC = 24V AC/DC = 48V AC/DC = 110V AC/DC = 230V AC = 230V DC and is a confidential disclosurelent without consideration other than the borrower’s agreement that it shall not be reproduced, copied, lent or disposed of directly or indirectly nor used for any purpose other than that for which it is specifically furnished. titel CAT. NO. 2ALP1LB-yyy 2ALP3LB-yyy 2ALP4LB-yyy LED Illuminated Metal 1* 2ALP5LB-yyy Selector Switch 2ALP6LB-yyy 2ALP7LB-yyy 2ALP8LB-yyy 2* Mounting Bracket 2BRK 3* LED Bulb MCB9xzzz 4* Mounting Bracket Screws incl. in 2BRK 5* Blub Holder 2LHB 6 Panel 7 Maintained Action mechanisim 2PPM S1 S2 8** Switch Contacts S3 S4 COLOR MIN. QTY. MAX. QTY. White 1 1 Green 1 1 Red 1 1 Amber 1 1 Blue 1 1 Clear 1 1 Yellow 1 1 1 1 1 1 2 2 1 1 Black 1 1 Green 1 4 Red 1 4 Green/Gray 1 4 Red/Gray 1 4 22 mm LED Illuminated Metal Projecting Operators 2ALPxLB-yyy (x=color, yyy=voltage) drawn by: Philipp Ernstberger checked by: Laszlo Gyorgypal released by: Laszlo Gyorgypal 11/1/2007 drawing no.: rev.: 11/1/2007 1PB-2ALPxLB-yyy 11/1/2007 scale: - - sheet: 1 of: 1