3 POSITION SELECTOR SWITCH CONTACT BLOCK OPERATION GUIDE CONTACT BLOCK GUIDE × 1 NO (left) × 2 NC in series (side × side) × 1 NO (right) 1 NC (right) revision for dwg # 1PB-2AS2E-x rev ch.no. - - date description original design 11/01/07 revised by Philipp E. 1 × × × × 1 NC (left) × × 2 NO in parallel (side × side) (Left or right as seen from front of operator) 39.00 mm [1.5 in] 2 3 Up tp six switch contacts can be installed. 5 27.10 mm [1.1 in] 4 ITEM 1* 43 mm [1.7 in] 67 mm [2.6 in] 91 mm [3.6 in] max. 6 mm [.25 in] 2* 3 4 * = Selector Switch is supplied with mounting bracket (ITEM 1,2 and 3) ** = Switch Contacts must be order separatly unless otherwise specified: all dimensions are in millimeters third angle projection tolerance XX XX.X XX.XX ALL = = = = ±1 mm ±0.5 mm ±0.2 mm − mm This Drawing is the property of R M E T R I C 35 Royal Road Flemington, NJ 08822-6000 (908) 806-9400 Fax (908) 806-9490 and is a confidential disclosurelent without consideration other than the borrower’s agreement that it shall not be reproduced, copied, lent or disposed of directly or indirectly nor used for any purpose other than that for which it is specifically furnished. 5** titel DESCRIPTION CAT. NO. 2AS2E-1 2AS2E-2 2AS2E-3 Selector Switch 2AS2E-4 2AS2E-5 2AS2E-6 Mounting Bracket 2BRK Mounting Bracket Screws incl. in 2BRK Panel S1 S2 Switch Contacts S3 S4 DESCRIPTION Maintained Spring Return Maintained Spring Return Spring Return Spring Return - MIN. MAX. QTY. QTY. Black 1 1 Black 1 1 Black 1 1 Black 1 1 Black 1 1 Black 1 1 1 1 2 2 Green 1 6 Red 1 6 Green/Black 1 6 Red/Black 1 6 Color 22 mm Non-Illuminated Metal Extended Selector Switch Operator 2AS2E-x drawn by: Philipp Ernstberger checked by: Laszlo Gyorgypal released by: Laszlo Gyorgypal 11/01/07 drawing no.: rev.: 11/01/07 1PB-2AS2E-x 11/01/07 scale: - - sheet: 1 of: 1