revision for dwg # 1PB-AFx - 5 7 11/19/2007 revised by Philipp E. 1 n29 mm o40 mm [1.6 in] 2 6 date description original design n35 mm [1.4 in] ch.no. - [1.1 in] rev 3 4 10 mm [.4 in] * = Operator includes 3x ARW1.2 and 1x ARW3.2 ** = Switch Contacts include Contact element washer and two SC24 installation screws, if more than two contact blocks are used, additional screws must be purchased seperatly (SC45, SC65 or SC90) ITEM DESCRIPTION max. 6 mm [.25 in] 16 mm [.6 in] 55 mm [2.2 in] 98 mm [3.9 in] unless otherwise specified: all dimensions are in millimeters third angle projection tolerance XX XX.X XX.XX ALL = = = = ±1 mm ±0.5 mm ±0.2 mm − mm This Drawing is the property of R M E T R I C 35 Royal Road Flemington, NJ 08822-6000 (908) 806-9400 Fax (908) 806-9490 and is a confidential disclosurelent without consideration other than the borrower’s agreement that it shall not be reproduced, copied, lent or disposed of directly or indirectly nor used for any purpose other than that for which it is specifically furnished. 1* 2* 3 4** 5** 6** 7** titel CAT. NO. AF1 AF2 30 mm Flush Non-Illuminated AF3 Momentary Metal Operator AF4 AF6 AF8 Rubber washer ARW1.2/ARW3.2 Panel Contact Element washer Switch Contacts S11 Switch Contacts S12 Contact Block Installation Screws SC25/SC45/SC65/SC90 COLOR White Black Green Red Blue Yellow Black Black Red Yellow - MIN. QTY. MAX. QTY. 1 1 1 1 1 1 1 1 1 1 1 1 1 4 1 2 1 2 1 2 2 2 30 mm Non-Illuminated Flush Momentary Metal Operator AFx (x=color) drawn by: Philipp Ernstberger checked by: Laszlo Gyorgypal released by: Laszlo Gyorgypal 11/19/2007 drawing no.: 11/19/2007 1PB-AFx 11/19/2007 scale: rev.: - sheet: 1 of: 1