Model RFP-800-100T Flanged Termination 800 Watts, 100Ω General Specifications Resistive Element Substrate Cover Mounting flange Leads Thick film Beryllium oxide ceramic Alumina ceramic Copper, nickel plated per QQ-N-290 99% pure silver (.005” thick) Electrical Specifications Features: • DC – 500 MHz • 800 Watts • BeO Ceramic • Non-Nichrome Resistive Element Resistance Range: Frequency Range; Power: 100 ohms, ± 5% DC – 500 MHz 800 Watts Tolerance is ±0.010”, unless otherwise specified. Designed to meet of exceed applicable portions of MIL-E-5400. Operating temperature is -55ºC to 155ºC (see chart for derating temperatures). All dimensions in inches. Specifications subject to change with out notice. • Welded Silver Leads • 100% Tested Outline Drawing 800-100T (097) Rev A Available on Tape and Reel For Pick and Place Manufacturing. USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 Model RFP-800-100T Typical Performance in a 50 ohm system: Power Derating: Mounting Footprint and Procedure .025 MIN. (2 PLACES) BOARD LOWER THAN LEAD. BOARD EVEN WITH LEAD. BOARD LOWER THAN LEAD. BOARD HIGHER THAN LEAD. SUGGESTED STRESS RELIEF METHODS NOT RECOMMENDED APPLICATION SCALE: NONE SCALE: NONE 800-100T (097) Rev A USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 Available on Tape and Reel For Pick and Place Manufacturing.