Series 652000 and 653000 PLCC-to-DIP Adapter FEATURES •Converts PLCC packaged ICs to DIP footprints. •Ideal for prototyping and testing/evaluation. •Available with PLCC sockets or PLCC pads on top side. •Consult factory for Panelized Form or for mounting of consigned ICs. GENERAL SPECIFICATIONS •ADAPTER BODY: FR-4, 0.062 [1.58] thick, with 1-oz. Cu traces •PINS: Brass 360 1/2-hard per UNS C36000, ASTM B16/B16M •PIN PLATING: Sn/Pb 93/7 is 200µ [5.08µ] per ASTM B579-73 over 100µ [2.54µ] Ni per SAE-AMS-QQ-N-290 with 10µ [0.254µ] Au per MIL-G-45204 over 100µ [2.54µ] Ni per SAE AMS-QQ-N-290 •OPTIONAL PLCC SURFACE MOUNT SOCKET: UL 94V-0 PPS •SOCKET CONTACTS: Phosphor Bronze, Sn-plated •CURRENT RATING: 1 amp •OPERATING TEMPERATURE: 221°F [105°C] MOUNTING CONSIDERATIONS •SUGGESTED PCB HOLE SIZE: 0.028 ±0.003 [0.71 ±0.08] dia. •Will plug into Standard IC Socket •See Table for Pad Layout when mounting PLCC socket ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED CUSTOMIZATION: In addition to the standard products shown on this page, Aries specializes in custom design and production. Special materials, platings, sizes, and configurations can be furnished, depending on the quantity. NOTE: Aries reserves the right to change product general specifications without notice. ORDERING INFORMATION XX-65X000-1 X No. of Pins 28, 32, 44, 68, 84 Series 652000: without socket 653000: with socket Plating 0 = Sn/Pb 1 = Au Solder Tail Pin CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS Pins Dim. “A” 28 1.400 [35.56] 32 1.600 [40.64] 44 2.200 [55.88] 68 3.400 [86.36] 84 4.200 [106.68] Dim. “B” Dim. “C” Dim. “D” 1.300 [33.02] 1.500 [38.10] 2.100 [53.34] 3.300 [88.32] 4.100 [104.14] 0.705 [17.91] 0.705 [17.91] 0.910 [23.11] 1.220 [30.99] 1.420 [36.07] 0.703 [17.86] 0.805 [20.45] 0.910 [23.11] 1.220 [30.99] 1.421 [36.09] Dim. “W” Dim. “X” Dim “Y” Dim. “Z” Pad Size ±0.003 [±0.08] ±0.003 [±0.08] ±0.003 [±0.08] ±0.003 non-cumulative non-cumulative [±0.08] 0.300 [7.62] 0.300 [7.62] 0.449 [11.41] 0.449 [11.41] 0.024 x 0.076 [0.61 x 1.93] 0.400 [10.16] 0.300 [7.62] 0.549 [13.95] 0.448 [11.39] 0.024 x 0.076 [0.61 x 1.93] 0.500 [12.70] 0.500 [12.70] 0.670 [17.02] 0.670 [17.02] 0.026 x 0.076 [0.66 x 1.93] 0.800 [20.32] 0.800 [20.32] 0.945 [24.00] 0.945 [24.00] 0.026 x 0.076 [0.66 x 1.93] 1.000 [24.40] 1.147 [29.13] 1.147 [29.13] 1.147 [29.13] 0.026 x 0.080 [0.66 x 2.03] Bristol, PA 19007-6810 USA TEL (215) 781-9956 • FAX (215) 781-9845 WWW.ARIESELEC.COM • [email protected] PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED 18014 Rev. AA