Specification Type : Issue: 02 Date: 2005-07-15 AXLGS635F Langasite (LGS) SMD Crystal Resonator Unit Parameter min. typ. max. Unit Frequency range Standard frequencies Crystal cut Overtone Load capacitance CL Adjustment tolerance Frequency offset Frequency stability vs. temperature in operation temperature range long term (aging rate) Resonance resistance Rr Motional capacitance C1 Static capacitance C0 Drive level Drive level dependence (DLD) Unwanted responses Insulation resistance Operable temperature range Storage temperature range Enclosure (see drawing) Can height H marking 10 29 Rotated Y 1 See ordering code -20 +20 -20 0 40 +52 +50 5 15 150 7 100 According to 2*Rr 500 -40 +85 -55 +125 SMD 6x3.5 (4-pad) 1,0 Part no. Frequency Date Code Tape & reel Condition MHz MHz pF ppm ppm ppm ppm °C ppm Ω fF pF µW MΩ °C °C 30 pF if not specified @ 25°C Overall (Note 1) See chart on page 2 IEC 60444-6 f0 ~ f0+500 kHz 100 V DC IEC 61837 DCC-4/06 mm TBD IEC 60286-3 Packing Notes: 1. Overall frequency stability = initial tolerance + temp. stability + aging (1st year) 2. Terminology and test conditions are according to IEC standard IEC60122-1, unless otherwise stated 3. Measurement technique according to IEC 60444-5 or equivalent Ordering Code: Model (Specification) AXLGS635F GmbH & Co. KG Wasemweg 5 D-74821 Mosbach Germany Load capacitance* Frequency [pF] [MHz] 20 10.000 *Series resonance: “S” AXLGS635F page 1(2) www.axtal.com fon: +49 (6261) 9398-34 fax: +49 (6261) 9398-36 E-mail: [email protected] Enclosure drawing Environmental conditions Test IEC 60068 Part ... Visual inspection, dimensions Sealing tests 2-17 IEC 60122-1 clause ... 4.5 4.6 4.8.2 Solderability Resistance to soldering heat Shock 2-20 4.8.3 2-27 4.8.8 Free fall 2-32 4.8.9 Vibration, sinusoidal 2-6 4.8.7 Endurance tests - ageing - extended aging GmbH & Co. KG Wasemweg 5 D-74821 Mosbach Germany 4.9.1 4.9.2 Test conditions Enclosure styles as in IEC 60122-3, if applicable Gross leak: Test Qc, Fine leak: Test Qk Test Ta (235 ± 5)°C Method 1 Test Tb Method 1A, 5s Test Ea, 3 x per 2 axes 5000g, 0.3 ms half-sine Test Ed procedure 1, 2 drops from 1m height Test Fc, 1 octave per min. 1 hour per axes 10 Hz ~ 2000 Hz, 20g. 30 days @ 85°C 1000h, 2000h, 8000h @85°C AXLGS635F page 2(2) www.axtal.com fon: +49 (6261) 9398-34 fax: +49 (6261) 9398-36 E-mail: [email protected]