AZDISPLAYS AZOLED034A-T

AZ DISPLAYS, INC.
COMPLETE LCD SOLUTIONS
SPECIFICATIONS FOR
OLED DISPLAY
PART NUMBER:
DATE:
AZOLED034A & AZOLED034A-T
August 27, 2009
AZOLED034A
1. General Description
1.1 Features
AZOLED034A ACTIVE OLED PANEL
Ultra Compact
NTSC/PAL/SECAM Video Auto Switch
Single Operation Voltage +12V
CVBS / S-Video (Option) / Analog RGB (PC Mode) Signal Input
Support Touch Screen Function (option)
1.2 Applications
Portable product
Industrial
Hand-held
Security
Instrument Display
Office Electronics
1.3 Application Precautions
Do not use the products herein for the following equipment which demands
extremely high performance in terms of functionality, reliability, or accuracy.
Aerospace equipment
Communication equipment for trunk lines.
Control equipment for the nuclear power industry.
Medical equipment related to life support, etc.
The other application that demands high reliability and functionality should first
contact a sales representative.
AZ DISPLAYS, INC.
PAGE 02 OF 23
2. Block Diagram
2.1 Block Diagram
AZ DISPLAYS, INC.
PAGE 3 OF 23
3.Panel Information
3.1 Panel Mechanical Specifications
Parameter
Specifications
Unit
Screen Size
3.4 (diagonal)
inch
Display Format
480 x (R.G.B) x 272
dot
Active Area
74.88(W) x 42.43 (H)
mm
Pixel Pitch
0.156(W) x 0.156(H)
mm
Pixel Configuration
Stripe
Outline Area
82.8(W) x 54.3(H)
mm
Thickness
1.6
mm
3.2 Panel Optical Characteristics
Parameter
Symbol
Horizontal
Viewing Angle
Vertical
Condition
Min
Left
Right
CR >10
Top
Bottom
Typ
Max
Unit
170
---
deg
170
---
170
---
deg
170
---
deg
Re
At optimized
CR
Contrast Ratio
Viewing
5000:1
10000:1 ---
---
---
---
---
50
us
---
angle
Response time
Rise Fall
Uniformity
Tr
Tf
---
θ= 0°
U
Brightness
White Chromaticity
LED Life Time
AZ DISPLAYS, INC.
---
---
70
75
---
170
200
230
x
θ= 0°
0.23
0.28
0.33
y
θ= 0°
25C
0.25
0.30
0.35
30000
---
---
Hr
PAGE 04 OF 23
4.1 Panel Mechanical Specifications (With Touch)
Parameter
Specifications
Unit
Screen Size
3.4 (diagonal)
inch
Display Format
480 x (R.G.B) x 272
dot
Active Area
74.88(W) x 42.43 (H)
mm
Pixel Pitch
0.156(W) x 0.156(H)
mm
Pixel Configuration
Stripe
Outline Area
82.8(W) x 54.3(H)
mm
Thickness
2.8
mm
4.2 Panel Optical Characteristics (With Touch)
Parameter
Symbol
Horizontal
Viewing Angle
Vertical
Condition
Left
Right
Top
Min
Typ
Max
Unit
---
170
---
deg
---
170
---
-----
170
170
---
deg
---
deg
CR >10
Bottom
At optimized
CR
Contrast Ratio
Viewing
5000:1
10000:1 ---
---
---
---
---
50
us
cd/m²
angle
Response time
Rise Fall
Tr
Tf
θ= 0°
Brightness
White Chromaticity
Operation life time
AZ DISPLAYS, INC.
-----
---
136
160
184
x
θ= 0°
0.26
0.31
0.36
y
θ= 0°
25℃
0.28
0.33
0.38
30000
---
---
Hr
PAGE 5 OF 23
Remark
5. Dimension Information
5.1 Unit(AZOLED034A)
AZ DISPLAYS, INC.
PAGE 06 OF 23
AZ DISPLAYS, INC.
5.2 Unit (AZOLED034A-T)
AZ DISPLAYS, INC.
PAGE 7 OF 23
AZ DISPLAYS, INC.
AZ DISPLAYS, INC.
PAGE 8 OF 23
6. Pin Description
6.1 J301 OLED LCD Panel I/O Terminals(FPC 71 Pin Below Contact Type)
Pin No Symbol
I/O
Description
1
TP1
I
Touch panel P1
2
TP2
I
Touch panel P2
3
TP3
I
Touch panel P3.
4
TP4
I
Touch panel P4
5
AR_VSS
I
Negative voltage for OLED
6
AR_VSS
I
Negative voltage for OLED
7
TEST1_VS
open CMEL test pin, it must be open.
8
AR_VDD
I
Positive voltage for OLED
9
AR_VDD
I
Positive voltage for OLED
10
TEST2_VD open CMEL test pin, it must be open.
11
ARREF
I/O
12
VGL
I/O
13
VGH
14
LVO
15
C22N
I/O
Connect to the step-up circuit, capacitors according to the step-up factor.
16
C22P
I/O
Leave this pin open if the internal step-up circuit is not used.
17
HVO
18
C21P
I/O
Connect to the step-up circuit, capacitors according to the step-up factor.
19
C21N
I/O
Leave this pin open if the internal step-up circuit is not used.
20
C11N
I/O
21
C11P
I/O
Connect to the step-up circuit, capacitors according to the step-up factor.
22
C12N
I/O
Leave this pin open if the internal step-up circuit is not used.
23
C12P
I/O
24
PVSS
25
DDVDH
26
VSSA
27
VSSA
28
VCI
29
VCI
30
VGAM1OUT I/O
I/O
I/O
I/O
P
I/O
P
P
P
Remark
Panel refers voltage of the regulator ARREF or external input
voltage.(-8V~+8V)
Low Voltage output of regulator VGL or external input voltage.(-3V~-8V)
High Voltage output of regulator VGH or external input voltage.(+3V~+8V)
Negative output voltage of the booster2. (-8.5V)
Positive output voltage of the booster2. (8.5V)
Charge pump ground pin, it must connect to external ground.
Output voltage of the booster1. (5.1V/6.0V)
Analog ground pin. It must connect to external ground.
Analog ground pin. It must connect to external ground.
A power supply for the Analog circuit. (3.0V~3.6V)
P
A power supply for the Analog circuit. (3.0V~3.6V)
Output voltage of the VGAM1OUT regulator and used positive powerof
source driver. (4.8V/5.8V)
Internal logic voltage input or output pin
VDC_ENB=0, VDDD is output, please connect to 1uF capacitor.
31
I/O
AZ DISPLAYS, INC.
VDC0
VDDD
Status
0
1.8
Norml display
1
2.5
OTP program
PAGE 09 OF 23
VDC_ENB=1, VDDD is input. (Input range = 1.6V~2.75V)
32
VCC
P
A power supply for the Digital circuit. (1.5V~3.6V)
33
VSSD
P
Digital ground pin. It must connect to external ground.
34
NRESET
I
35
NCS
I
Serial Interface chip enable pin. (Normally pull high)
36
SCL
I
Serial Interface clock input pin. (Normally pull high)
37
SDA
I
Serial Interface data line. (Normally pull high)
Reset pin. Setting either pin low initializes the LSI. Must be reset after power
is supplied. (Normally pull high)
Data enable:
38
DE
I
When VSYNC+HSYNC+DE mode,
DE=H: Data enable, DE=L: Data disable (Black). (Normally pull low)
Frame synchronizing signal.
39
VSYNC
I
If VSPL=0: Active low.
If VSPL=1: Active high.
Line synchronizing signal.
40
HSYNC
I
If HSPL=0: Active low.
If HSPL=1: Active high.
Dot clock signal. If DPL=0: Data are input on the rising edge of DOTCLK. If
41
DCLK
I
42
D27
I
43
D26
44
D25
45
D24
46
D23
only D07~D00 are used, and others short to GND. DX7~DX0 has 8-bit
47
D22
width, respectively to compose 16,777,216 color and 256 gray scale of 1
48
D21
pixel.
49
D20
50
D17
51
D16
52
D15
53
D14
54
D13
55
D12
56
D11
57
D10
58
D07
59
D06
60
D05
61
D04
62
D03
63
D02
DPL=1: Data are input on the falling edge of DOTCLK.
Digital data input. DX0 is LSB and DX7 is MSB. (Normally pull low)
1.
If parallel RGB input mode is used, D0X, D1X, and D2X indicate R, G, and
B data in turn.
2.
If serial RGB or RGBD or CCIR601 or CCIR656 input mode is selected,
AZ DISPLAYS, INC.
PAGE 10 OF 23
64
D01
65
D00
66
TEST3_W
67
AR_VDD
I
Positive voltage for OLED
68
AR_VDD
I
Positive voltage for OLED
69
AR_VSS
I
Negative voltage for OLED
70
AR_VSS
I
Negative voltage for OLED
71
TEST4_P
open CMEL test pin, it must be open.
open CMEL test pin, it must be open.
6.2 J101 Pin Assignment of Analog RGB Input (D-Sub 15 Pin)
Pin No Symbol
I/O Description
1
NC
-
No Connection
2
NC
-
No Connection
3
NC
-
No Connection
4
GND
-
Ground
5
NC
6
VS_IN
I
TTL Vertical sync
7
HS_IN
I
TTL Horizontal sync
8
AGND
-
Analog Ground
9
RI+
I
Analog Red Signal
10
AGND
-
Analog Ground
11
GI+
I
Analog Green Signal
12
AGND
-
Analog Ground
13
BI+
14
GND
Remark
No Connection
-
Analog Blue Signal
I
-
Ground
AZ DISPLAYS, INC.
PAGE 11 OF 23
6.3 J105 Pin Assignment of Key (Pitch 1.25mm 9Pin, Side Entry Type)
Pin No Symbol
I/O Description
1
N.C
-
No Connection
2
KEY-ADC1
I
KEY ADC Input 1
3
KEY-ADC0
I
KEY ADC Input 0
4
GND
-
Ground
5
VDD
-
+3.3V Output Voltage
6
IR_DATA
I
DATA of IR Receiver
7
LED-R
O
Index Red LED for power off control
8
LED-G
O
Index Green LED for power on control
9
GND
-
Ground
Remark
6.4 J102C Pin Assignment of Signal Input (Pitch 1.25mm 15Pin, Side Entry Type)
Pin No Symbol
I/O Description
Remark
+12V Input Voltage
1
VCC12V
2
VCC12V
-
+12V Input Voltage
3
GND_D
-
Ground
4
GND_D
-
Ground
5
VIDEO1
I
Video1 Input Signal
6
GND_A
-
Ground For Video1
7
VIDEO2
I
Video2 Input Signal
8
GND_A
-
Ground For Video2
9
N.C
10
AGND
-
Analog Ground
11
S1_Y+
I
Analog Luma Input of S-Video1
12
GND
-
Ground for Analog Luma Input of S-Video1
13
S1_C+
I
Analog Chroma Input of S-Video1
14
GND
-
Ground for Analog Chroma Input of S-Video1
15
GND_D
-
Ground
-
No Connection
-
AZ DISPLAYS, INC.
PAGE 12 OF 23
7. Absolute Maximum Ratings
7.1 Absolute Maximum Ratings
Parameter
Symbol
Input Voltage
Vin
Video Input Signal
Video in
S-Video Input Signal
Max
Unit
+14
V
0.5
2.0
Vp-p
@75
S-Video in
0.5
2.0
Vp-p
@75
Analog RGB Input Signal
Analog RGB in
0.5
2.0
Vp-p
@75
Digital Input Signal
TTL
+3.6
V
Operating Temperature
Storage Temperature
AZ DISPLAYS, INC.
Min
+10
+0.3
-10
+60
-20
+70
Remark
C
C
PAGE 13 OF 23
8. Recommended operating conditions
8.1 Electrical Characteristics
Parameter
Symbol
Input Voltage
Vin
Total Current
Iin
I/O
I
Min
Typ
Max
Unit
+11
+12
+13
V
I
I
Power Consumption
Output Voltage
VDD
O
Video Input Signal
Video in
I
S-Video Input Signal
S-Video in
Y
Analog RGB Input Signal
Analog RGB in
+3.2
195
mA
2.3
W
+3.3
+3.4
Note
@+12V
V
I=10mA
1.0
Vp-p
@75
I
0.7
Vp-p
@75
C
I
0.286
Vp-p
@75
RGB
I
0.7
Vp-p
@75
8.2 VGA Mode Characteristics
Dots per inch
Hor.
Unit
Polarity
Ver.
640*480
31.469
KHz
Negative
800*600
37.879
KHz
Positive
Unit
Polarity
Hz
Negative
Hz
Positive
59.941
60.317
Note
8.3 Optics Sample Test Data
Parameter
S/N
White Window
Red
Green
Blue
0.281
0.651
0.282
0.148
.y
0.305
0.346
0.678
0.145
L(cd/m²)
349
TC(°K)
9150
001 x
Remark
±15
BM-7 FAST(TOPCON)
2.Video Pattern Generator: FLUKE PM54200
3. Measurement Distance
500mm 50mm
4. TOPCON BM-7 Luminance Meter 2° filed of view is used in the testing
(After 10min ~20min operation)
AZ DISPLAYS, INC.
PAGE 14 OF 23
9.Operation manual
9.1 Driver Board Manual
To AZOLED034A
KEYBOARD
TO I/O
BOARD
To USB Board
9.2 Power and RCA Input Board (Optional)
AZ DISPLAYS, INC.
PAGE15 of 23
10. Key Function by OSD
10.1 Menu Operation
Current selected indicator
Meaning of the selected indicator
Other indicators
Current value
Fig. 9-1
Expand current selected indicator
Adjustable range
To Driver Board (J105)
POWER
AUTO
SOURCE
MENU
UP
DOWN
Operations of key board
1. To navigate the menu, press [MENU]. (Fig. 9-1)
2. The indicator lighting up in white color is the selected adjustment item.
3. To Next Item of the menu, press [MENU] again.
4. The operations below are only available when • MenuŽ is st
arted.
5. Press [UP] / [DOWN] to adjust the value of the selected item.
AZ DISPLAYS, INC.
PAGE 16 OF 23
Overview of the menu
Indicator
Meaning
Adjustable range
For
Remark
Brightness
0
64
AV / S-Video / VGA
Adjust-Bar
Contrast
0
64
AV / S-Video / VGA
Adjust-Bar
Color
0
64
AV / S-Video
Adjust-Bar
Tint
0
32
AV / S-Video
Sharpness
0
16
AV / S-Video
Color Tone
Normal / Warm / Cool
Adjust-Bar
AV / S-Video / VGA
H-Position
-25
+25
AV / S-Video / VGA
Balance-Bar
V-Position
-10
+10
AV / S-Video / VGA
Balance-Bar
Auto
Scan
Information
Setup
VGA
Over Scan / Under Scan
AV / S-Video
AV / S-Video / VGA
Fig. 9-2
AV / S-V
Fig. 9-3
Factory Set
AV / S-Video / VGA
Exit
AV / S-Video / VGA
Fig. 9-2
AZ DISPLAYS, INC.
PAGE 17 OF 23
Setup Menu
Firmware VER 0.25 above
Fig. 9-3
Indicator
Meaning
Adjustable range
Show Status
ON / OFF
Blue Screen
ON / OFF
Auto Power On
ON / OFF
Auto Sleep
OFF / 3s / 5s / 15s /
30s
Detect Source
ON / OFF
Function
Remark
ON: Show
Show screen status.
OFF: Hidden
If loss signal will put on the
ON: Blue
blue or black screen.
OFF: Black
Power input module will be ON: Auto
auto turn on.
OFF: Manual
If signal loss over setting
ON: Auto
times will be power off.
OFF: Normal
Auto detection which source ON: Auto
in exist.
OFF: Normal
Return
Note : Priority : Auto Sleep > Auto Power On
Note : VGA Only don't have Detect Source function.
AZ DISPLAYS, INC.
PAGE 18 OF 23
10.2 Operation
Indicator of input signal
Video system
Fig. 9-4
[Power]
Monitor power on / off
[Source]
Input signal switch
Overview of input signals
Indicator
Input signal
Interface
Video system
VGA
Analog RGB
640x480_60 / 800x600_60
AZ DISPLAYS, INC.
PAGE 19 OF 23
11. Application Schematic Diagram
11.1 Application Circuit
AZ DISPLAYS, INC.
PAGE 20 OF 23
11.2 Key and IR Circuit
AZ DISPLAYS, INC.
PAGE 21 OF 23
11.3 Keyboard
AZ DISPLAYS, INC.
PAGE 22 OF 23
11.4 S-Video and RCA Input Board
AZ DISPLAYS, INC.
PAGE 23 OF 23