Document No.: Tentative Product Specification Module name: P0340WQLC-T Issue date: 2009/6/17 Version: 2.2 Customer Approved by Customer Approved by CMEL PD Division ENG Division QA Dept FOR MORE INFORMATION: AZ DISPLAYS, INC. 75 COLUMBIA, ALISO VIEJO, CA 92656 Http://www.AZDISPLAYS.com Note: 1. The information contained herein may be change without prior notice. It is therefore advisable to contact CHI MEI EL Corp. before designed your product based on this specification. 2. This tentative product specification is for reference, some item or setting maybe changed for evaluation. 1 Document No.: Reversion History Version Date Page Ver.1.0 Ver.1.1 Ver.1.2 2008/02/29 2008/03/19 2008/04/08 Ver.1.3 Ver.1.4 2008/04/15 2008/05/28 Ver.1.5 2008/07/08 All 18 10,11,12 14 10 5 10,11,12 15 10,11,12 Description Tentative specification was first issued Change External Dimension Modify Initial Register Setting Add System Diagram Modify Electro-Optical Characteristic Modify DC Characteristic Modify Initial Register Setting Modify Pin Assignment Modify Electro-Optical Characteristic & Initial Register Setting Ver.1.6 2008/09/25 Ver.1.7 Ver.1.8 Ver.1.9 Ver.2.0 Ver.2.1 2008/10/02 2008/11/21 2008/12/01 2009/5/20 2009/5/22 Ver.2.2 2009/6/17 10,11,12 19 3 20 10 10 10,11,12 10 18 10,11,12 Modify Initial Register Setting Add Reliability Test Add Weight of Mechanical Data Add Package Drawing Modify Life Time Modify Electro-Optical Characteristic Modify Initial Register Setting(Gamma:6) Modify Electro-Optical Characteristic Update External Dimension Modify Initial Register Setting(Gamma:7) and Electro-Optical Characteristic 2 Document No.: 1. Purpose: This documentation defines general product specification for OLED module supplied by CMEL. The information described in this technical specification is tentative. Please Contact CMEL’s representative while your product is modified. 2. General Description: Driving Mode: Active Matrix Color Mode: Full Color (16M color) Driver IC: HX5116, COG Assembly Interface: 8bit serial RGB and 24bit parallel RGB interface Application: Portable DVD, PMP, GPS, Photo Frame etc. 3. Mechanical Data: No. Items Specification Unit 1 Diagonal Size 3.4 Inch 2 Resolution 480 x RGB x 272 3 Pixel Pitch H: 156 V: 156 um 4 Active Area 74.88 x 42.43 mm 5 Outline Area 82.8 x 54.3 mm 6 Thickness 1.6 mm 7 Weight 21 g 3 Document No.: 4. Maximum ratings: Symbol Parameter Value Unit VCC Logic Supply Voltage -0.3 to +3.6 V VCI Analog Supply Voltage -0.3 to +3.6 V Table 7.1 Maximum ratings Maximum ratings are those values beyond which damages to the device may occur. Functional operation should be restricted to the limits in the Electrical Characteristics tables or Pin Description section. Unused outputs must be left open. 4 Document No.: 5. Electrical Characteristic: DC Characteristic DC Characteristics (Unless otherwise specified, Voltage Referenced to VSS = 0V, VCC = 1.5 to 3.6V, TA = -20 to 70C) Parameter Symbol Test condition Min. Typ. Max. Unit VCC - 1.5 - 3.6 V VCI - 3.0 - 3.6 V DDVDH Output Voltage 1 DDVDH Set CP1X=0 4.9 5.1 5.3 V DDVDH Output Voltage 2 DDVDH Set CP1X=1 5.8 6.0 6.2 V VGAM1OUT Output Voltage 1 VGAM1OUT Set CP1X=0 4.7 4.8 4.9 V VGAM1OUT Output Voltage 2 VGAM1OUT Set CP1X=1 5.7 5.8 5.9 V Gate driver High Output Voltage VGH - +3 - +8 V Gate driver Low Output Voltage VGL - -8 - -3 V OLED Diode Refer Voltage ARREF - -8 - +8 V Logic High Output Voltage VOH Iout=-400μA 0.8 * VCC - VCC V Logic Low Output Voltage VOL Iout=400μA 0 - 0.2 * VCC V Logic High Input voltage VIH 0.8 * VCC - VCC V Logic Low Input voltage VIL 0 - 0.2 * VCC V System power supply pins of the logic block Booster Reference Supply Voltage Range - Logic Input Current IIL/IIH No pull up or pull low -1 - 1 µA Pull high resistance RH Pull up pins 600 900 1200 KΩ Pull low resistance RL Pull low pins 600 900 1200 KΩ High Output Current IOH 50 - - µA Low Output Current IOL - - -50 µA Output leakage Current IOZ -1 - 1 µA Output voltage offset VOS Output voltage deviation VOD Analog standby current ISTB Analog operating current IVCI Logic Pins Input Capacitance CIN S1~S107, Vo=4.9V vs. 4V S1~S107, Vo=0.1V vs. 1V S1~S107, Vo=0.1V~DDVDH-0.1V S1~S107, Vo=0.1V~DDVDH-0.1V VCI=3.0V, Stand by mode VCI=3.0V, S1~S160 no load - 5 - ±10 mV ±10 mV - 10 uA - 20 mA 5 7.5 pF Document No.: AC Characteristic AC Electrical Characteristics 6 Document No.: Clock and Data input waveforms Define the HSYNC to VSYNC timing for RGB mode 7 Document No.: 5.2.2 480RGB X 272 serial RGB interface 5.2.2 480RGB X 272 parallel RGB interface 8 Document No.: Serial RGB Horizontal Data Format Parallel RGB Horizontal Data Format Digital RGB Vertical Data Format 9 Document No.: 6. Electro-Optical Characteristic: Items Symbol Operating Luminance L Power Consumption Pon Maximum Current Min Max Unit Remark 2 200 230 Cd/m (1)(5) 500 680 mW 30% pixels on (1) Icc 210 mA (1) Response Time Tres 50 uS (2) CIEx (White) Wx 0.23 0.28 0.33 - (5) CIEy (White) Wy 0.25 0.30 0.35 - (5) CIEx (Red) Rx 0.615 0.655 0.695 - (5) CIEy( Red) Ry 0.30 0.34 0.38 - (5) CIEx (Green) Gx 0.195 0.235 0.275 - (5) CIEy( Green) Gy 0.61 0.65 0.69 - (5) CIEx (Blue) Bx 0.10 0.14 0.18 - (5) CIEy( Blue) By 0.11 0.15 0.19 - (5) Viewing Angle VA 160 170 Degree (3) Contrast CR 5000:1 10000:1 LTop 30000 Operation Lifetime 170 Typ. (4) Hrs (1)(6) Note: Measuring surrounding: dark room Surrounding temperature: 25oC 1. Test condition: a. AR_VDD= 5.0V +/-0.03V, AR_VSS= -5.0V +/-0.03V b. IC Initial Register Setting: （Gamma Setting Group：7） 24-bit parallel RGB (DE) Ver. 7 Index_out(0x04); Parameter_out(0x23); //set display mode 24-bit parallel RGB (DE) Index_out(0x05); Parameter_out(0x82); //set display mode Index_out(0x07); Parameter_out(0x0F); //set driver capability Index_out(0x34); Parameter_out(0x18); //set display timing Index_out(0x35); Parameter_out(0x28); //set display timing 10 Document No.: Index_out(0x36); Parameter_out(0x16); //set display timing Index_out(0x37); Parameter_out(0x01); //set display timing Index_out(0x02); Parameter_out(0x02); //OTP On Index_out(0x0A); Parameter_out(0x79); //VGHVGL=+/-6V Index_out(0x09); Parameter_out(0x28); //VGAM1OUT=5.02V Index_out(0x10); Parameter_out(0x77); //set R slop Index_out(0x11); Parameter_out(0x76); //set G slop Index_out(0x12); Parameter_out(0x77); //set B slop Index_out(0x13); Parameter_out(0x00); //set R_0 Index_out(0x14); Parameter_out(0x00); //set R_10 Index_out(0x15); Parameter_out(0x00); //set R_36 Index_out(0x16); Parameter_out(0x00); //set R_80 Index_out(0x17); Parameter_out(0x00); //set R_124 Index_out(0x18); Parameter_out(0x00); //set R_168 Index_out(0x19); Parameter_out(0x01); //set R_212 Index_out(0x1A); Parameter_out(0x03); //set R_255 Index_out(0x1B); Parameter_out(0x00); //set G_0 Index_out(0x1C); Parameter_out(0x03); //set G_10 Index_out(0x1D); Parameter_out(0x00); //set G_36 Index_out(0x1E); Parameter_out(0x02); //set G_80 Index_out(0x1F); Parameter_out(0x01); //set G_124 Index_out(0x20); Parameter_out(0x02); //set G_168 Index_out(0x21); Parameter_out(0x02); //set G_212 Index_out(0x22); Parameter_out(0x06); //set G_255 Index_out(0x23); Parameter_out(0x00); //set G_0 Index_out(0x24); Parameter_out(0x02); //set B_10 Index_out(0x25); Parameter_out(0x01); //set B_36 Index_out(0x26); Parameter_out(0x02); //set B_80 Index_out(0x27); Parameter_out(0x02); //set B_124 Index_out(0x28); Parameter_out(0x03); //set B_168 Index_out(0x29); Parameter_out(0x03); //set B_212 Index_out(0x2A); Parameter_out(0x08); //set B_255 Index_out(0x06); Parameter_out(0x03); //set display on AR_VDD= +5.0V AR_VSS= -5.0V 11 Document No.: 8-bit serial RGB (DE) Ver. 7 Index_out(0x04); Parameter_out(0x21); //set display mode 8-bit serial RGB (DE) Index_out(0x05); Parameter_out(0x82); //set display mode Index_out(0x07); Parameter_out(0x0F); //set driver capability Index_out(0x34); Parameter_out(0x48); //set display timing Index_out(0x35); Parameter_out(0x78); //set display timing Index_out(0x36); Parameter_out(0x42); //set display timing Index_out(0x37); Parameter_out(0x01); //set display timing Index_out(0x02); Parameter_out(0x02); //OTP On Index_out(0x0A); Parameter_out(0x79); //VGHVGL=+/-6V Index_out(0x09); Parameter_out(0x28); //VGAM1OUT=5.02V Index_out(0x10); Parameter_out(0x77); //set R slop Index_out(0x11); Parameter_out(0x76); //set G slop Index_out(0x12); Parameter_out(0x77); //set B slop Index_out(0x13); Parameter_out(0x00); //set R_0 Index_out(0x14); Parameter_out(0x00); //set R_10 Index_out(0x15); Parameter_out(0x00); //set R_36 Index_out(0x16); Parameter_out(0x00); //set R_80 Index_out(0x17); Parameter_out(0x00); //set R_124 Index_out(0x18); Parameter_out(0x00); //set R_168 Index_out(0x19); Parameter_out(0x01); //set R_212 Index_out(0x1A); Parameter_out(0x03); //set R_255 Index_out(0x1B); Parameter_out(0x00); //set G_0 Index_out(0x1C); Parameter_out(0x03); //set G_10 Index_out(0x1D); Parameter_out(0x00); //set G_36 Index_out(0x1E); Parameter_out(0x02); //set G_80 Index_out(0x1F); Parameter_out(0x01); //set G_124 Index_out(0x20); Parameter_out(0x02); //set G_168 Index_out(0x21); Parameter_out(0x02); //set G_212 Index_out(0x22); Parameter_out(0x06); //set G_255 Index_out(0x23); Parameter_out(0x00); //set G_0 Index_out(0x24); Parameter_out(0x02); //set B_10 Index_out(0x25); Parameter_out(0x01); //set B_36 Index_out(0x26); Parameter_out(0x02); //set B_80 Index_out(0x27); Parameter_out(0x02); //set B_124 Index_out(0x28); Parameter_out(0x03); //set B_168 Index_out(0x29); Parameter_out(0x03); //set B_212 12 Document No.: Index_out(0x2A); Parameter_out(0x08); //set B_255 Index_out(0x06); Parameter_out(0x03); //set display on AR_VDD= +5.0V AR_VSS= -5.0V 2. Response Time test condition Tf Tr 100% 90% 10% Time 3. Viewing angle test condition: Vss(GND) ψ=270° 4. Contrast Luminance with all pixels white CR = Luminance with all pixels black 5. Optical tester: CA210 6. Brightness of 30% power consumption. Operating Life Time is defined when the luminance has decayed to less than 50% of the initial measured luminance before life test. 13 Document No.: 7. System Diagram: HOSTs HX5116 SDA SCL NCS NRESET Serial Interface DCLK VSYNC HSYNC DE DB (24bit) RGB Interface DB(24bit) 14 Document No.: 8. Pin Assignment: PIN Symbol I/O Description 1 TP1 I Touch panel P1 2 TP2 I Touch panel P2 3 TP3 I Touch panel P3. 4 TP4 I Touch panel P4 5 AR_VSS I Negative voltage for OLED 6 AR_VSS I Negative voltage for OLED 7 TEST1_VS open CMEL test pin, it must be open. 8 AR_VDD I Positive voltage for OLED 9 AR_VDD I Positive voltage for OLED 10 TEST2_VD Remarks open CMEL test pin, it must be open. 11 ARREF I/O 12 VGL I/O 13 VGH I/O Panel refers voltage of the regulator ARREF or external input voltage. (-8V~+8V) Low Voltage output of regulator VGL or external input voltage. (-3V~-8V) High Voltage output of regulator VGH or external input voltage. (+3V~+8V) 14 LVO I/O Negative output voltage of the booster2. (-8.5V) I/O Connect to the step-up circuit, capacitors according to the step-up factor. Leave this pin open if the internal step-up circuit is not used. I/O Positive output voltage of the booster2. (8.5V) I/O Connect to the step-up circuit, capacitors according to the step-up factor. Leave this pin open if the internal step-up circuit is not used. I/O Connect to the step-up circuit, 4capacitors according to the step-up factor. Leave this pin open if the internal step-up circuit is not used. 15 C22N 16 C22P 17 HVO 18 C21P 19 C21N 20 C11N 21 C11P 22 C12N 23 C12P 24 PVSS 25 DDVDH P I/O Charge pump ground pin, it must connect to external ground. Output voltage of the booster1. (5.1V/6.0V) 26 VSSA P Analog ground pin. It must connect to external ground. 27 VSSA P Analog ground pin. It must connect to external ground. 28 VCI P A power supply for the Analog circuit. (3.0V~3.6V) 29 VCI P A power supply for the Analog circuit. (3.0V~3.6V) 30 VGAM1OUT I/O Output voltage of the VGAM1OUT regulator and used positive power of source driver. (4.8V/5.8V) Internal logic voltage input or output pin I/O 31 VDDD VDC_ENB=0, VDDD is output, please connect to 1uF capacitor. VDC0 VDDD 15 Status Document No.: 0 1.8V Normal display 1 2.5V OTP program VDC_ENB=1, VDDD is input. (Input range = 1.6V~2.75V) 32 VCC P A power supply for the Digital circuit. (1.5V~3.6V) 33 VSSD P Digital ground pin. It must connect to external ground. 34 NRESET I Reset pin. Setting either pin low initializes the LSI. Must be reset after power is supplied. (Normally pull high) 35 NCS I Serial Interface chip enable pin. (Normally pull high) 36 SCL I Serial Interface clock input pin. (Normally pull high) 37 SDA I Serial Interface data line. (Normally pull high) Data enable: I 38 DE When VSYNC+HSYNC+DE mode, DE=H: Data enable, DE=L: Data disable (Black). (Normally pull low) Frame synchronizing signal. I 39 VSYNC If VSPL=0: Active low. If VSPL=1: Active high. Line synchronizing signal. I 40 HSYNC If HSPL=0: Active low. If HSPL=1: Active high. Dot clock signal. I 41 DCLK 42 D27 43 D26 44 D25 45 D24 If DPL=0: Data are input on the rising edge of DOTCLK. If DPL=1: Data are input on the falling edge of DOTCLK. I Digital data input. DX0 is LSB and DX7 is MSB. (Normally pull low) 1. If parallel RGB input mode is used, D0X, D1X, and D2X indicate R, G, and B data in turn. 2. If serial RGB or RGBD or CCIR601 or CCIR656 input mode is 46 D23 selected, only D07~D00 are used, and others short to GND. 47 D22 DX7~DX0 has 8-bit width, respectively to compose 16,777,216 color and 256 gray scale of 1 pixel. 48 D21 49 D20 50 D17 51 D16 52 D15 53 D14 54 D13 55 D12 56 D11 57 D10 58 D07 16 Document No.: 59 D06 60 D05 61 D04 62 D03 63 D02 64 D01 65 D00 66 TEST3_W open CMEL test pin, it must be open. 67 AR_VDD I Positive voltage for OLED 68 AR_VDD I Positive voltage for OLED 69 AR_VSS I Negative voltage for OLED 70 AR_VSS I Negative voltage for OLED 71 TEST4_P open CMEL test pin, it must be open. 17 Document No.: 9. External Dimension: 18 Document No.: 10. Reliability Test: No Item Specification 1 High Temp. Storage 85℃, 240hr 2 Low Temp. Storage -40℃, 240hr 3 High Temp. Operation 60℃, 240hr 4 Low Temp. Operation -40℃, 240hr 5 High Temp./ High Hum. Storage 85℃, 85 % RH, 240hr 6 High Temp./ High Hum. Operation 60℃, 90 % RH, 240hr -40℃, 30 min. --> 85℃, 30 min., 100 cycles 7 Thermal Shock storage 8 ESD TBD 9 Packing Test TBD Test and measurement conditions All measurements shall not be started until the specimens attain to temperature stability. The degradation of Polarizer is ignored for item 1, 5 & 6. The test pattern at operating condition is 30%P.C. alternating pictures. Evaluation Criteria No damage to glass or encapsulation No drastic change to display Defects / Mura follow product specification Luminance: Within +/-50% of initial value Current consumption: within +/-50% of initial value 19 Document No.: 11. Package: 20