Document No.: Tentative Product Specification Module name: P0430WQLC-T Issue date: 2009/05/27 Version: 1.8 Customer Approved by Customer Approved by CMEL PD Division ENG Division QA Dept FOR MORE INFORMATION: AZ DISPLAYS, INC. 75 COLUMBIA, ALISO VIEJO, CA 92656 Http://www.AZDISPLAYS.com Note: 1. The information contained herein may be change without prior notice. It is therefore advisable to contact CHI MEI EL Corp. before designed your product based on this specification. 2. This tentative product specification is for reference, some item or setting maybe changed for evaluation. 1 Document No.: Reversion History Version Date Page Ver.1.0 Ver.1.1 2007/12/26 2008/03/19 Ver.1.2 2008/04/08 Ver.1.3 Ver.1.4 2008/07/21 2008/09/24 Ver.1.5 Ver.1.6 Ver.1.7 2008/10/02 2008/11/21 2009/04/21 All 10,11,12 15,16,17 18 10 14 19 20 9,10,11 3 18 19 10 3 9,10,11 19 21 9,10,11 Ver.1.8 2009/05/27 Description Tentative specification was first issued Add IC Initial Register Setting Modify Pin Assignment Change External Dimension Change Typical Luminance Add System Diagram Add Reliability Test Add Package Drawing Modify Electro-Optical Characteristic Add Weight of Mechanical Data Add Test and Measurement Conditions Modify Package Drawing Modify Life Time Modify Absolute Maximum Ratings Modify Initial Register Setting Add Handling, Storage, Panel ID Label Naming Rule and Warranty Modify Electro-Optical Characteristic Change CIE and Gamma 2 Document No.: 1. Purpose: This documentation defines general product specification for OLED module supplied by CMEL. The information described in this technical specification is tentative. Please Contact CMEL’s representative while your product is modified. 2. General Description: Driving Mode: Active Matrix Color Mode: Full Color (16M color) Driver IC: HX5116, COG Assembly Interface: 8bit serial RGB and 24bit parallel RGB interface Application: Portable DVD, PMP, GPS, Photo Frame etc. RoHS Compatible 3. Mechanical Data: No. Items Specification Unit 1 Diagonal Size 4.3 Inch 2 Resolution 480 x RGB x 272 3 Pixel Pitch 198 x 198 um 4 Active Area 95.0 x 53.8 mm 5 Outline Area 103.5 x 67 mm 6 Thickness 2.05 mm 7 Weight 39.6 g 4. Absolute Maximum Ratings: Absolute ratings of environment： Item Symbol Value Min. Max. Unit Note Storage Temperature TST -40 +85 ºC (1) Operating Ambient Temperature TOP -20 +60 ºC (2) Note (1) The storage duration for both critical temperature (-40 & 85℃) meet reliability test criteria. (2) The operating duration for both critical temperature (-20 & 60℃) meet reliability test criteria. 3 Document No.: 5. Electrical Characteristic: DC Characteristic DC Characteristics (Unless otherwise specified, Voltage Referenced to VSS = 0V, VCC = 1.5 to 3.6V, TA = -20 to 70C) Parameter Symbol Test condition Min. Typ. Max. Unit VCC - 1.5 - 3.6 V VCI - 3.0 - 3.6 V DDVDH Output Voltage 1 DDVDH Set CP1X=0 4.9 5.1 5.3 V DDVDH Output Voltage 2 DDVDH Set CP1X=1 5.8 6.0 6.2 V VGAM1OUT Output Voltage 1 VGAM1OUT Set CP1X=0 4.7 4.8 4.9 V VGAM1OUT Output Voltage 2 VGAM1OUT Set CP1X=1 5.7 5.8 5.9 V Gate driver High Output Voltage VGH - +3 - +8 V Gate driver Low Output Voltage VGL - -8 - -3 V OLED Diode Refer Voltage ARREF - -8 - +8 V Logic High Output Voltage VOH Iout=-400µA 0.8 * VCC - VCC V Logic Low Output Voltage VOL Iout=400µA 0 - 0.2 * VCC V Logic High Input voltage VIH 0.8 * VCC - VCC V Logic Low Input voltage VIL 0 - 0.2 * VCC V System power supply pins of the logic block Booster Reference Supply Voltage Range - Logic Input Current IIL/IIH No pull up or pull low -1 - 1 µA Pull high resistance RH Pull up pins 600 900 1200 KΩ Pull low resistance RL Pull low pins 600 900 1200 KΩ High Output Current IOH 50 - - µA Low Output Current IOL - - -50 µA Output leakage Current IOZ -1 - 1 µA Output voltage offset VOS Output voltage deviation VOD Analog standby current ISTB Analog operating current IVCI Logic Pins Input Capacitance CIN S1~S107, Vo=4.9V vs. 4V S1~S107, Vo=0.1V vs. 1V S1~S107, Vo=0.1V~DDVDH-0.1V S1~S107, Vo=0.1V~DDVDH-0.1V VCI=3.0V, Stand by mode VCI=3.0V, S1~S160 no load - 4 - ±10 mV ±10 mV - 10 uA - 20 mA 5 7.5 pF Document No.: AC Characteristic AC Electrical Characteristics 5 Document No.: Clock and Data input waveforms Define the HSYNC to VSYNC timing for RGB mode 6 Document No.: 5.2.2 480RGB X 272 serial RGB interface 5.2.2 480RGB X 272 parallel RGB interface 7 Document No.: Serial RGB Horizontal Data Format Parallel RGB Horizontal Data Format Digital RGB Vertical Data Format 8 Document No.: 6. Electro-Optical Characteristic: Items Symbol Operating Luminance L Power Consumption Min Max Unit Remark 2 200 230 Cd/m (1)(5) Pon 700 950 mW 30% pixels on (1) Maximum Current Icc 220 302 mA (1) Response Time Tres 50 uS (2) CIEx (White) Wx 0.23 0.28 0.33 - (5) CIEy (White) Wy 0.25 0.30 0.35 - (5) CIEx (Red) Rx 0.615 0.655 0.695 - (5) CIEy( Red) Ry 0.300 0.340 0.380 - (5) CIEx (Green) Gx 0.195 0.235 0.275 - (5) CIEy( Green) Gy 0.610 0.650 0.690 - (5) CIEx (Blue) Bx 0.100 0.140 0.180 - (5) CIEy( Blue) By 0.105 0.145 0.185 - (5) Viewing Angle VA 160 170 Degree (3) Contrast CR 5000:1 10000:1 LTop 30000 Operation Lifetime 170 Typ. (4) Hrs (1)(6) Note: Measuring surrounding: dark room Surrounding temperature: 25oC (1) Test condition: a. AR_VDD= 5.2V +/-0.03V, AR_VSS= -4.8V +/-0.03V b. IC Initial Register Setting: 24-bit parallel RGB (DE) Ver. 5 Index_out(0x04); Parameter_out(0x23); //set display mode 24-bit parallel RGB (DE) Index_out(0x05); Parameter_out(0x82); //set display mode Index_out(0x07); Parameter_out(0x0F); //set driver capability Index_out(0x34); Parameter_out(0x18); //set display timing Index_out(0x35); Parameter_out(0x28); //set display timing Index_out(0x36); Parameter_out(0x16); //set display timing Index_out(0x37); Parameter_out(0x01); //set display timing Index_out(0x02); Parameter_out(0x02); //OTP On 9 Document No.: Index_out(0x0A); Parameter_out(0x8A); //VGHVGL=+/-6V Index_out(0x09); Parameter_out(0x26); //VGAM1OUT=4.95V Index_out(0x10); Parameter_out(0x7A); //set R slop Index_out(0x11); Parameter_out(0x78); //set G slop Index_out(0x12); Parameter_out(0x75); //set B slop Index_out(0x13); Parameter_out(0x00); //set R_0 Index_out(0x14); Parameter_out(0x02); //set R_10 Index_out(0x15); Parameter_out(0x00); //set R_36 Index_out(0x16); Parameter_out(0x01); //set R_80 Index_out(0x17); Parameter_out(0x01); //set R_124 Index_out(0x18); Parameter_out(0x01); //set R_168 Index_out(0x19); Parameter_out(0x01); //set R_212 Index_out(0x1A); Parameter_out(0x04); //set R_255 Index_out(0x1B); Parameter_out(0x00); //set G_0 Index_out(0x1C); Parameter_out(0x07); //set G_10 Index_out(0x1D); Parameter_out(0x03); //set G_36 Index_out(0x1E); Parameter_out(0x03); //set G_80 Index_out(0x1F); Parameter_out(0x05); //set G_124 Index_out(0x20); Parameter_out(0x05); //set G_168 Index_out(0x21); Parameter_out(0x03); //set G_212 Index_out(0x22); Parameter_out(0x0A); //set G_255 Index_out(0x23); Parameter_out(0x00); //set B_0 Index_out(0x24); Parameter_out(0x03); //set B_10 Index_out(0x25); Parameter_out(0x01); //set B_36 Index_out(0x26); Parameter_out(0x00); //set B_80 Index_out(0x27); Parameter_out(0x00); //set B_124 Index_out(0x28); Parameter_out(0x00); //set B_168 Index_out(0x29); Parameter_out(0x00); //set B_212 Index_out(0x2A); Parameter_out(0x01); //set B_255 Index_out(0x06); Parameter_out(0x03); //set display on AR_VDD= +5.2V AR_VSS= -4.8V 8-bit serial RGB (DE) Ver. 5 Index_out(0x04); Parameter_out(0x21); //set display mode 8-bit serial RGB (DE) Index_out(0x05); Parameter_out(0x82); //set display mode Index_out(0x07); Parameter_out(0x0F); //set driver capability 10 Document No.: Index_out(0x34); Parameter_out(0x48); //set display timing Index_out(0x35); Parameter_out(0x78); //set display timing Index_out(0x36); Parameter_out(0x42); //set display timing Index_out(0x37); Parameter_out(0x01); //set display timing Index_out(0x02); Parameter_out(0x02); //OTP On Index_out(0x0A); Parameter_out(0x8A); //VGHVGL=+/-6V Index_out(0x09); Parameter_out(0x26); //VGAM1OUT=4.95V Index_out(0x10); Parameter_out(0x7A); //set R slop Index_out(0x11); Parameter_out(0x78); //set G slop Index_out(0x12); Parameter_out(0x75); //set B slop Index_out(0x13); Parameter_out(0x00); //set R_0 Index_out(0x14); Parameter_out(0x02); //set R_10 Index_out(0x15); Parameter_out(0x00); //set R_36 Index_out(0x16); Parameter_out(0x01); //set R_80 Index_out(0x17); Parameter_out(0x01); //set R_124 Index_out(0x18); Parameter_out(0x01); //set R_168 Index_out(0x19); Parameter_out(0x01); //set R_212 Index_out(0x1A); Parameter_out(0x04); //set R_255 Index_out(0x1B); Parameter_out(0x00); //set G_0 Index_out(0x1C); Parameter_out(0x07); //set G_10 Index_out(0x1D); Parameter_out(0x03); //set G_36 Index_out(0x1E); Parameter_out(0x03); //set G_80 Index_out(0x1F); Parameter_out(0x05); //set G_124 Index_out(0x20); Parameter_out(0x05); //set G_168 Index_out(0x21); Parameter_out(0x03); //set G_212 Index_out(0x22); Parameter_out(0x0A); //set G_255 Index_out(0x23); Parameter_out(0x00); //set B_0 Index_out(0x24); Parameter_out(0x03); //set B_10 Index_out(0x25); Parameter_out(0x01); //set B_36 Index_out(0x26); Parameter_out(0x00); //set B_80 Index_out(0x27); Parameter_out(0x00); //set B_124 Index_out(0x28); Parameter_out(0x00); //set B_168 Index_out(0x29); Parameter_out(0x00); //set B_212 Index_out(0x2A); Parameter_out(0x01); //set B_255 Index_out(0x06); Parameter_out(0x03); //set display on AR_VDD= +5.2V AR_VSS= -4.8V 11 Document No.: (2) Response Time test condition Tf Tr 100% 90% 10% Time (3) Viewing angle test condition: (4) Contrast Luminance with all pixels white CR = Luminance with all pixels black (5) Optical tester: CA210 (6) Operation Life Time is defined when the luminance decay to less than 50% of the initial luminance during the average operation. The Luminance of the average operation is defined picture changing 30% power consumption at full on 200nits. 12 Document No.: 7. System Diagram: HOSTs HX5116 SDA SCL NCS NRESET Serial Interface DCLK VSYNC HSYNC DE DB (24bit) RGB Interface DB(24bit) 13 Document No.: 8. Pin Assignment: PIN Symbol I/O Description 1 TP1 I Touch panel P1 2 TP2 I Touch panel P2 3 TP3 I Touch panel P3. 4 TP4 I Touch panel P4 5 AR_VSS I Negative voltage for OLED 6 AR_VSS I Negative voltage for OLED 7 TEST1_VS open CMEL test pin, it must be open. 8 AR_VDD I Positive voltage for OLED 9 AR_VDD I Positive voltage for OLED 10 TEST2_VD Remarks open CMEL test pin, it must be open. 11 ARREF I/O 12 VGL I/O 13 VGH I/O Panel refers voltage of the regulator ARREF or external input voltage. (-8V~+8V) Low Voltage output of regulator VGL or external input voltage. (-3V~-8V) High Voltage output of regulator VGH or external input voltage. (+3V~+8V) 14 LVO I/O Negative output voltage of the booster2. (-8.5V) I/O Connect to the step-up circuit, capacitors according to the step-up factor. Leave this pin open if the internal step-up circuit is not used. I/O Positive output voltage of the booster2. (8.5V) I/O Connect to the step-up circuit, capacitors according to the step-up factor. Leave this pin open if the internal step-up circuit is not used. I/O Connect to the step-up circuit, 4capacitors according to the step-up factor. Leave this pin open if the internal step-up circuit is not used. 15 C22N 16 C22P 17 HVO 18 C21P 19 C21N 20 C11N 21 C11P 22 C12N 23 C12P 24 PVSS 25 DDVDH P I/O Charge pump ground pin, it must connect to external ground. Output voltage of the booster1. (5.1V/6.0V) 26 VSSA P Analog ground pin. It must connect to external ground. 27 VSSA P Analog ground pin. It must connect to external ground. 28 VCI P A power supply for the Analog circuit. (3.0V~3.6V) 29 VCI P A power supply for the Analog circuit. (3.0V~3.6V) 30 VGAM1OUT I/O Output voltage of the VGAM1OUT regulator and used positive power of source driver. (4.8V/5.8V) Internal logic voltage input or output pin I/O 31 VDDD VDC_ENB=0, VDDD is output, please connect to 1uF capacitor. VDC0 VDDD 14 Status Document No.: 0 1.8V Normal display 1 2.5V OTP program VDC_ENB=1, VDDD is input. (Input range = 1.6V~2.75V) 32 VCC P A power supply for the Digital circuit. (1.5V~3.6V) 33 VSSD P Digital ground pin. It must connect to external ground. 34 NRESET I Reset pin. Setting either pin low initializes the LSI. Must be reset after power is supplied. (Normally pull high) 35 NCS I Serial Interface chip enable pin. (Normally pull high) 36 SCL I Serial Interface clock input pin. (Normally pull high) 37 SDA I Serial Interface data line. (Normally pull high) Data enable: I 38 DE When VSYNC+HSYNC+DE mode, DE=H: Data enable, DE=L: Data disable (Black). (Normally pull low) Frame synchronizing signal. I 39 VSYNC If VSPL=0: Active low. If VSPL=1: Active high. Line synchronizing signal. I 40 HSYNC If HSPL=0: Active low. If HSPL=1: Active high. Dot clock signal. I 41 DCLK 42 D27 43 D26 44 D25 45 D24 46 D23 47 D22 If DPL=0: Data are input on the rising edge of DOTCLK. If DPL=1: Data are input on the falling edge of DOTCLK. I Digital data input. DX0 is LSB and DX7 is MSB. (Normally pull low) 1. If parallel RGB input mode is used, D0X, D1X, and D2X indicate R, G, and B data in turn. 2. If serial RGB or RGBD or CCIR601 or CCIR656 input mode is selected, only D07~D00 are used, and others short to GND. DX7~DX0 has 8-bit width, respectively to compose 16,777,216 color and 256 gray scale of 1 pixel. 48 D21 49 D20 50 D17 51 D16 52 D15 53 D14 54 D13 55 D12 56 D11 57 D10 58 D07 15 Document No.: 59 D06 60 D05 61 D04 62 D03 63 D02 64 D01 65 D00 66 TEST3_W open CMEL test pin, it must be open. 67 AR_VDD I Positive voltage for OLED 68 AR_VDD I Positive voltage for OLED 69 AR_VSS I Negative voltage for OLED 70 AR_VSS I Negative voltage for OLED 71 TEST4_P open CMEL test pin, it must be open. 16 Document No.: 9. External Dimension: 17 Document No.: 10. Reliability Test: No Item Specification 1 High Temp. Storage 85℃, 240hr 2 Low Temp. Storage -40℃, 240hr 3 High Temp. Operation 60℃, 240hr 4 Low Temp. Operation -20℃, 240hr 5 High Temp./ High Hum. Storage 85℃, 85 % RH, 120 hr 6 High Temp./ High Hum. Operation 60℃, 90 % RH, 240hr -40℃, 30 min. --> 85℃, 30 min., 100 cycles 7 Thermal Shock storage 8 ESD 9 Packing Test (1) Contact discharge mode: +/- 2kV, 3 times/FPC pin (2) Air discharge mode: +/- 8 kV, 10 times/central area Drop 1 corner, 3 sides, 6 faces, 1 time for each; Height: follow ISTA standard. Follow ISTA standard, 1.14Grms Test axis: X, Y, Z Test and measurement conditions All measurements shall not be started until the specimens attain to temperature stability. The degradation of Polarizer is ignored for item 1, 5 & 6. The test pattern at operating condition is 30%P.C. alternating pictures. Evaluation Criteria No damage to glass or encapsulation No drastic change to display Defects / Mura follow product specification Luminance: Within +/-50% of initial value Current consumption: within +/-50% of initial value 18 Document No.: 11. Handling: Do not scratch the surface of the polarizer film as it is easily damaged. When cleaning the display surface, use soft cloth with solvent (as recommended below) and wipe lightly Ethyl alcohol Isopropyl alcohol Do not wipe the display surface with dry or hard materials that damage the polarizer surface. Since this OLED panel is made of glass, dropping the module or banging it against hard objects may cause cracks or fragmentation. Do not disassemble the OLED module as it may cause permanent damage. Hold OLED very carefully when placing OLED module into the system housing. Do not excessive stress or pressure to OLED module. 12. Storage: Storing in a polyethylene bag with the opening sealed. Placing in a dark place where neither exposure to direct sunlight nor any fluorescent light is permitted and keep at room temperature & room humidity. Storing with no contact with polarizer surface. （It is recommended to store them in the inner container which we delivered.） 13. Panel ID Label Naming Rule Single format example: 19 Document No.: 14. Package: 20 Document No.: 15. Warranty Warranty term is 12 months of reliability characteristics of quality level after the outgoing date in Chi Mei EL Corporation. Chi Mei EL Corporation could compensate for defectives, which happen within warranty term under condition that products should be stored or be used as specified under normal condition within the contents of specification. Otherwise, it is unable to compensate for defectives when below items happen: (1) Defectives happen by customer’s mistake such as careless handling or design change, etc. (2) Defectives caused by natural uncontrolled disaster. (3) The direct and/or indirect damage caused by unapproved or disagreed use behavior, condition, environment, which is over or not belong to the product specification or other related technique document published by CMEL. After 12 months of warranty term, all replacement for defectives will be charged. 21