AZDISPLAYS C0240QGLA-T

Document No.:
Approval Product Specification
Module name: C0240QGLA-T
Issue date: 2008/12/03
Version: 1.6
Customer
Approved by Customer
Approved by CMEL
PD Division
ENG Division
QA Dept
FOR MORE INFORMATION:
AZ DISPLAYS, INC.
75 COLUMBIA, ALISO VIEJO, CA 92656
Http://www.AZDISPLAYS.com
Note:
1.
The information contained may be changed without prior notice before approval. It is therefore advisable to contact
Chi MEI EL Corp. before designing your product.
1
Document No.:
Reversion History
Version
Date
Page
Ver.1.0
Ver.1.1
Ver.1.2
Ver.1.3
Ver.1.4
2008/05/12
2008/05/16
2008/05/16
2008/05/28
2008/10/22
All
14
14
14
4
11
14
18
18
Ver.1.5
Ver.1.6
2008/11/07
2008/12/03
20
21
22
23
4
14
Description
Specification was first issued
Modify Initial Code（Vgh/Vgl）
Modify Initial Code（Vgl）
Modify Electro-Optical Characteristic (CIE_Gx)
Mod Absolute maximum ratings (Modify to the
Panel Operating Condition)
Instruction data => Parameter data
Add Gamma Setting Group Code
Mod Pin-46 to be Output Pin from IC
Add Notice of Pin-45/46/47/48 that:
SDI=SDIN、SDO=SDOUT
CSB=CS=NCS、RW_WRB=SCL
Add “Test and measurement conditions”
Add Notice of “Handling & Storage”
Add Label (Optional) ID Position on Drawing
Mod package by belt
Mod the Range of Temperature
Mod the Lifetime (From 20K to 30K)
2
Document No.:
1. Purpose:
This documentation defines general product specification for OLED module supplied by
CMEL. The information described in this technical specification is tentative. Please Contact
CMEL’s representative while your product is modified.
2. General Description:
Driving Mode: Active Matrix.
Color Mode: Full Color (262K color)
Driver IC: S6E63D6, COG Assembly
Interface:
1. MPU i80-system 18-/16-/9-/8-bit bus interface
2. MPU i68-system 18-/16-/9-/8-bit bus interface
3. Serial data transfer interface (SPI)
4. RGB 18-/16-/6-bit bus interface (DOTCLK, VSYNC, HSYNC, DE, DB17-0)
Application: Cell phone etc..
RoHS Compatible
3. Mechanical Data:
No.
Items
Specification
Unit
1
Diagonal Size
2.4”
Inch
2
Resolution
3
Pixel Pitch
240 xRGBx320
0.051×0.153
mm
4
Active Area
36.72×48.96
mm
5
Outline Area(Glass)
42×58.6
mm
6
Thickness
1.65 (Typ)
mm
7
Weight
12 (Typ)
g
3
Document No.:
4. Absolute Maximum ratings:
4.1 Absolute ratings of environment：
Item
Symbol
Value
Min.
Max.
Unit
Note
Storage Temperature
TST
-40
+80
ºC
(1)
Operating Ambient Temperature
TOP
-20
+60
ºC
(2)
Note (1) The storage duration for both critical temperature (-40 & 80℃) meet reliability test criteria.
(2) The operating duration for both critical temperature (-20 & 60℃) meet reliability test criteria.
4.2 Electrical absolute ratings：
Item
Symbol
Unit
Value
Power supply voltage 1
AR_Vdd
V
+4.6V +/- 0.05
Power supply voltage 2
AR_Vss
V
-4.4V +/- 0.1
Power supply voltage 3
VCI
V
+2.5 ~ +3.3
Power supply voltage 4
VDD3
(IOVcc)
V
+1.65 ~ +3.3
4
Document No.:
5. Electrical Characteristic:
5.1 DC Characteristic
5
Document No.:
6
Document No.:
5.2 AC Characteristic
5.2.1 CPU interface M68
(
7
Document No.:
5.2.2
CPU interface M80
(
8
Document No.:
Image Data format for 18bit CPU interface (262k color)
Image Data format for 16bit CPU interface (65k color)
Image Data format for 9bit CPU interface (262k color)
Image Data format for 8bit CPU interface (65K color)
Case 1:
Case 2:
Image Data format for 8bit CPU interface (262K color)
9
Document No.:
5.2.3
SPI
(
10
Document No.:
ID RS RW
(Note)
RS = 0 : Index data
RS = 1 : Parameter data
11
Document No.:
5.2.4
RGB Interface
(
12
Document No.:
CLK
DE
DATA
Image Data format for 18bit RGB interface (262k color)
Image Data format for 16bit RGB interface (65k color)
Image Data format for 6bit RGB interface (262k color)
13
Document No.:
6. Electro-Optical Characteristic:
Items
Symbol
Min
Typ.
Max
Unit
Remark
2
Operating Luminance
L
170
200
230
Cd/m
(1)(5)
Power Consumption
Pon
-
260
300
mW
30% pixels
on (1)
Max. Current
Icc
-
-
120
mA
(1)
Response Time
Tres
-
-
50
us
(2)
CIEx (White)
Wx
0.26
0.31
0.36
-
(5)
CIEy( White)
Wy
0.28
0.33
0.38
-
(5)
CIEx (Red)
Rx
0.62
0.66
0.70
(5)
CIEy( Red)
Ry
0.30
0.34
0.38
(5)
CIEx (Green)
Gx
0.25
0.29
0.33
(5)
CIEy( Green)
Gy
0.62
0.66
0.70
(5)
CIEx (Blue)
Bx
0.11
0.15
0.19
(5)
CIEy( Blue)
By
0.12
0.16
0.20
(5)
Viewing Angle
VA
160
170
-
Contrast
CR
5000:1
10000:1
LTop
30000
Operation Lifetime
Note:
Measuring surrounding: dark room
Surrounding temperature: 25oC
IOVCC = 1.65V ~ 3.3V
1. Test condition:
a. AR_VDD= 4.6V+/- 0.03V, AR_VSS= -4.4V+/- 0.03V
b. IC Initial Register Setting:
R03:
0x0030 // 16bit mode
R10:
0x0000 // IC stand by off
R18:
0x0028 // Frame Rate=80Hz
RF8:
0x000F // VGH=+5V
RF9:
0x0019 // VGL=-7V
R05:
0x0001 // Display On
Gamma Register Setting:（Gamma Setting Group：C）
R70h
0x2B00
R71h
0x2C00
R72h
0x3280
R73h
0x2523
R74h
0x2319
R75h
0x2C24
R76h
0x251A
R77h
0x2D2A
R78h
0x281B
14
Degree
(3)
(4)
Hrs
(1)(6)
Document No.:
2.response Time test condition
Tf
Tr
100%
90%
10%
Time
3.Viewing angle test condition:
Vss(GND)
ψ=270°
Viewing Angle= CR>10
4.Contrast
Luminance with all pixels white
CR =
Luminance with all pixels black
5.Optical tester: CA210
6. Brightness of 30% power consumption. Operating Life Time is defined when the
luminance has decayed to less than 50% of the initial measured luminance before life test.
15
Document No.:
7. System Diagram:
16
Document No.:
8. Pin Assignment:
PIN
1
Symbol
I/O
Description
AR_VDD I
Positive voltage for OLED
2
AR_VSS I
Nagative voltage for OLED
3
VCI I
Power supply for analog circuit(2.5v~3.3v)
4
VCI1 O
A reference voltage for 1st booster r(connect a 1u/10v capacitance to
gnd)
5
GND I
Ground
6
C12M I
7
C12P I
8
C11M I
9
C11P I
10
VLOUT1 O
11
C31P I
12
C31M I
13
C32P I
14
C32M I
15
VLOUT3 O
3rd booster output pin. (1u/16V)
16
VLOUT2 O
2nd booster output pin. (1u/16V)
17
C21P I
18
C21M I
19
VGS I
A reference level for the grayscale voltage generation circuit.
(connect to gnd)
20
IOVCC I
I/O power supply
21
SPB I
22
ID_MIB I
23
DB17 I/O
24
DB16 I/O
25
DB15 I/O
26
DB14 I/O
27
DB13 28
DB12 I/O 18-bit interface : DB 17-0
18-bit interface : DB 17-0
I/O
29
DB11 I/O
30
DB10 31
DB9 I/O Fix unused pin to the VSS level
I/O
32
DB8 I/O
33
DB7 I/O
External capacitance connect pin between C12M and C12P (1u/10V)
External capacitance connect pin between C11M and C11P (1u/10V)
1st booster output pin. (1u/10V)
External capacitance connect pin between C31M and C31P (1u/10V)
External capacitance connect pin between C32M and C32P (1u/10V)
External capacitance connect pin between C21M and C21P. (1u/10V)
Select the CPU interface mode.
(0=parallel interface 1=serial interface)
Select the CPU type
(0=intel 80x-system 1=motorola 68x-system)
BI-directional data bus.
When CPU I/F,
18-bit interface : DB 17-0
16-bit interface : DB 17-10 , DB 8-1
9-bit interface : DB 8-0
8-bit interface : DB 8-1
When RGB I/F
16-bit interface : DB 17-10, DB 8-1
6-bit interface : DB 8-3
17
Remarks
Document No.:
34
DB6 I/O
35
DB5 I/O
36
DB4 I/O
37
DB3 I/O
38
DB2 I/O
39
DB1 I/O
40
DB0 I/O
41
VSYNC I
42
HSYNC I
43
DOTCLK I
Frame-synchronizing signal.
(VSPL=0 Low active, VSPL=1 High active)
FIX this pin at VSS level if the pin is not used
Line-synchronizing signal.
(HSPL=0 Low active, HSPL=1 High active)
FIX this pin at VSS level if the pin is not used
Input pin for clock signal of external interface : dot clock.
DPL=0 Display data is fetched at DOTCLK’s rising edge
DPL=1 Display data is fetched at DOTCLK’s falling edge
Fix this pin at VSS level if the pin is not used.
Data enablesignal pin for RGB interface.
44
ENABLE I
45
SDI (SDIN) I
46
SDO (SDOUT) O
47
CSB (CS/NCS) I
48
RW_WRB (SCL) I
49
RS I
50
E_RDB I
EPL
ENABLE
GRAM write
0
0
Valid
GRAM
address
Updated
0
1
Invalid
Held
1
0
Invalid
Held
1
1
Valid
Updated
For a serial peripheral interface (SPI), input data is fetched at
the rising edge of the SCL signal, Fix SDI pin at VSS level if the
pin is not used.
For a serial peripheral interface (SPI), serves as the serial data
output pin (SDO), Successive bits are output at the falling edge
of the SCL signal.
Chip select signal input pin.
0= driver IC is selected and can be accessed.
1= driver IC is not selected and cannot be accessed.
Pin function
CPU type
Pin description
Read/Write operation
RW
68-system
selection pin
0=write
1=read
Write strobe signal.(Input pin)
WRB
80_system
Data is fetched at the rising
edge.
SCL
SPI
The synchronous clock signal
Register select pin.
0=Index/status, 1=instruction parameter, GRAM data
Must be fixed at VDD3 level when not used.
Pin Function
CPU type
Pin description
Read/Writeoperation enable
E
68-system
pin
Read strobe signal.
RDB
80_system
Read out data at the low level
When SPI mode is selected, fix this pin at VDD3 levle
18
Document No.:
RESETB
I
MVDD
O
VREG1OUT
O
Reset pin initializes the IC when low. Should be reset after
power-on.
Internal power for RAM. Connect a capacitance to gnd. Connect a
capacitance (1u/10v) to gnd.
A reference level for the grayscale voltage. Connect a capacitance
(1u/10v) to gnd.
VCI
I
Power supply for analog circuit (2.5v~3.3v)
VGH
O
VGL
O
The positive voltage used in the gate driver. Connect a capacitance
(1u/10v) to gnd.
The negative voltage used in the gate driver. Connect a capacitance
(1u/10v) to gnd.
GND
Ground
19
Document No.:
9.
Reliability Test:
No.
Items
Specification
1
High Temp. Storage
85°C, 240hrs
2
Low Temp. Storage
-40°C, 240hrs
3
High Temp. Operation
60°C, 240hrs
4
Low Temp. Operation
-40°C, 240hrs
5
High Temp / Humidity Storage
85°C, 85%RH, 240hrs
6
High Temp / Humidity Operation
60°C, 90%RH, 240hrs
Thermal shock
-40°C ~85°C (-40°C /30min; transit/3min;
85°C /30min; transit /3min)
1cycle: 66min, 100 cycles
Vibration
Frequency: 5~50HZ, 0.5G
Scan rate : 1 oct/min
Time : 2 hrs/axis
Test axis : X, Y, Z
7
8
9
Drop
10 ESD
Height: 76cm
Sequence : 1 angle、3 edges and 6
faces
Cycles: 1
Air discharge model, ±8kV, 10 times
Test and measurement conditions
All measurements shall not be started until the specimens attain to temperature stability.
The degradation of Polarizer is ignored for item 1, 5 & 6.
The test pattern at operating condition is 30%P.C. alternating pictures.
Evaluation Criteria
No damage to glass or encapsulation
No drastic change to display
Defects / Mura follow product specification
Luminance: Within +/-50% of initial value
Current consumption: within +/-50% of initial value
20
Document No.:
10. Handling:
10.1 Do not scratch the surface of the polarizer film as it is easily damaged.
10.2 When cleaning the display surface, use soft cloth with solvent (as recommended below)
and wipe lightly
Ethyl alcohol
Isopropyl alcohol
10.3 Do not wipe the display surface with dry or hard materials that damage the polarizer
surface.
10.4 Since this OLED panel is made of glass, dropping the module or banging it against
hard objects may cause cracks or fragmentation.
10.5 Do not disassemble the OLED module as it may cause permanent damage.
10.6 Hold OLED very carefully when placing OLED module into the system housing. Do
not excessive stress or pressure to OLED module.
11. Storage
11.1 Storing in a polyethylene bag with the opening sealed.
11.2 Placing in a dark place where neither exposure to direct sunlight nor any fluorescent
light is permitted and keep at room temperature & room humidity.
11.3 Storing with no contact with polarizer surface.
（It is recommended to store them in the inner container which we delivered.）
21
Document No.:
12. External Dimension:
22
Document No.:
13. Package:
23