BOARDCOM BCM3510

BCM3510
PRODUCT
Brief
®
BCM3510
B C M 3 5 1 0
H D T V / C AT V
O F
B E N E F I T S
• Full equalizer architecture spans -6 to +40 msec delays.
• Automatic NTSC co-channel rejection filter provides
performance superior to traditional designs.
• Full 496-tap equalizer implementation eliminates
multipath effects over a wide dynamic range.
• Direct IF sampling architecture reduces system cost.
• Digital adjacent channel filters provide additional
rejection for challenging environmental conditions.
• On-chip digital PLL simplifies circuit design.
• Integrated microcontroller with on-chip ROM for
1–51 Mbps variable rate QAM/VSB receiver
Direct 36/44 MHz IF sampled architecture
10-Bit A/D converter with integral AGC amplifier
Digital demodulator and matched filters
Adjacent channel filters
NTSC co-channel rejection filter
496-tap adaptive decision-feedback equalizer
All-digital clock and carrier recovery
Integrated PLLs to minimize external components
•
•
•
•
•
•
•
•
•
S U M M A R Y
F E AT U R E S
• Integrated 64/256-QAM and 8-VSB receiver
RECEIVER
• CATV/HDTV standards-compliant FEC decoder
• ITU-T J.83 annex A/B/C CATV modes
• ATSC A/53 HDTV mode
• Integrated deinterleaver RAM for all modes
simplified software development, intelligent monitoring
and fast-channel acquisition.
• Intelligent embedded microcontroller
• MPEG-2 transport output
• PCMCIA and Smart Card Format—EIA 679 A,B
• PLL Generated Output Clock
• Glueless interface to BCM7020 video and graphics subsystem
• Low-power standby mode
• I C or SPI microcontroller interface
• 128-pin PQFP package
• 3.3V I/O and analog operation,
• Operates at 15 dB SNR threshold of visibility.
• Multiple AGC loops handle wide dynamic range input
and rapid signal fading.
• Integrated AGC and 10-bit A/D converter for direct
interface to standard DTV tuners.
• MPEG-2 transport interface requires no glue logic to
interface to the BCM7020 video and graphics subsystem,
smart cards and PCMCIA conditional access devices.
2
• Support for both QAM and VSB for cable TV ready
systems at no additional cost.
1.8V digital operation
QAM/VSB CATV/HDTV Receiver
Memory
Conditional
Access
BCM3510
RF
IN
ATSC/CATV
Tuner
VSB/QAM
HDTV/CATV
Receiver
BCM3310
Broadband Communications Processor
BCM7020
HDTV MPEG-2
Transport Demux,
Audio/ Video
Decoder and
Display Engine
HD Video
Audio