“LAN-MATE” SERIES SINGLE RJ45 CONNECTOR MODULE WITH INTEGRATED 10 BASE T MAGNETICS Page : 1/2 P/N:LT1S103 A. General Specifications: 1. RJ-45 connector integrated with X’FMER /Impedance resistor/High voltage capacitor. 2. Size same as RJ-45 connector to save PCB board space. 3. Reduce EMI radiation, Improve EMI performance. 4. Design for 10 BASE transmission over UTP-5 cable. 5. Operating temperature range: 0°C to +70°C. B. Electrical Specifications@25°C: 1.Turns Ratio(±5%):1CT:1 2.Sine Wave Inductance : 200 µH Min. 3. Interwinding Capacitance CW/W : 10 pF Max. 4. Leakage Inductance : 0.2 µH Max. 5. DCR : 0.3 Ω Max. 6. HI-POT : 2000Vrms. C. Schematic: Prepared :Luo Ming Li Checked by: Xu Wenbing Approved : Alexander Wu Drawing no.: Pulse Transformer REV.:A1 Date : 2001/08/07 “LAN-MATE” SERIES SINGLE RJ45 CONNECTOR MODULE WITH INTEGRATED 10 BASE T MAGNETICS Page : 2/2 P/N:LT1S103 D. Mechanical: 1. Plastic Material : PBT 15% Glass Filled (UL 94V-0) , Black Housing 2. Metal Shield : Brass C2680-H, 20u Nickle Plated, t=0.25mm 3. Spring Wire : 0.45mm Dia. Phosphor bronze with 6u gold plated . 4. Solder Pin : 0.4x0.4mm ,Phosphor bronze with Solder plated 5. Durability : 300 Mating cycles Min . E. PCB Layout Mounting Hole (Top View) Prepared :Luo Ming Li Checked by: Xu Wenbing Approved : Alexander Wu Drawing no.: Pulse Transformer REV.:A1 Date : 2001/08/07