BOTHHAND LT1S001

“LAN-MATE” SERIES
SINGLE RJ45 CONNECTOR MODULE WITH INTEGRATED 10 BASE T MAGNETICS
P/N : LT1S001
Page : 1/2
A. General Specifications
1. RJ-45 connector integrated with X’FMER/Impedance Resistor/High voltage capacitor
2. Size same as RJ-45 connector to save PCH Board space.
3. Reduce EMI radiation, improve EMI performance.
4. Complies with IEEE802.3 standards
B. Electrical Specifications@25° C
1. Turns Ratio(±5%): TX=1CT:1.414CT & RX=1:1
3. Inductance: 200µH Min. @0.2V/100KHz
4. Leakage Inductance (TX & RX) : 0.5µH Max
5. Inter winding Capacitance (TX & RX) : 14pF Max.
6. HI-POT Isolation: 1500 Vrms
C. Schematic:
Prepared :Luo Ming Li
Checked by: Xu Wenbing
Approved : Alexander Wu
Drawing no.: Pulse Transformer
REV.:A3
Date : 2001/08/07
“LAN-MATE” SERIES
SINGLE RJ45 CONNECTOR MODULE WITH INTEGRATED 10 BASE T MAGNETICS
P/N : LT1S001
Page : 2/2
D. Mechanical:
1. Plastic Material : PBT 15% Glass Filled (UL 94V-0) , Black Housing
2. Metal Shield
: Brass C2680-H, 20u Nickle Plated, t=0.25mm
3. Spring Wire
: 0.45mm Dia. Phosphor bronze with 6u gold plated .
4. Solder Pin
: 0.4x0.4mm ,Phosphor bronze with Solder plated
5. Durability
: 300 Mating cycles Min .
E. PCB Layout Mounting Hole (Top View)
Prepared :Luo Ming Li
Checked by: Xu Wenbing
Approved : Alexander Wu
Drawing no.: Pulse Transformer
REV.:A3
Date : 2001/08/07