“LAN-MATE” SERIES SINGLE RJ45 CONNECTOR MODULE WITH INTEGRATED 10 BASE T MAGNETICS P/N: LT1S010 Page : 1/2 A. General Specifications 1. RJ-45 connector integrated with X’FMER/ Impedance Resistor/High voltage capacitor 2. Size same as RJ-45 connector to save PCB Board space. 3. Reduce EMI radiation, improve EMI performance. 4. Complies with IEEE802.3 standards 5. Operating temperature range : 0°C to +70°C. B. Electrical Specifications@25°C: 1. Turn Ratio: P1-P3:J1-J2=1CT:1 & P6-P8:J3-J6=1CT:1.41 2. Primary OCL Inductance: 140µH Min. @100KHz/ 0.2V 3. Leakage Inductance : 0.4µH Max 4. Inter winding Capacitance: 20pF Max. 5. HI-POT Isolation: 1500 Vrms C. Schematic: Prepared :Luo Ming Li Checked by: Xu Wenbing Approved : Alexander Wu Drawing no.: Pulse Transformer REV.:A4 Date : 2001/08/07 “LAN-MATE” SERIES SINGLE RJ45 CONNECTOR MODULE WITH INTEGRATED 10 BASE T MAGNETICS P/N: LT1S010 Page : 2/2 D. Mechanical: 1. Plastic Material : PBT 15% Glass Filled (UL 94V-0) , Black Housing 2. Metal Shield : Brass C2680-H, 20u Nickle Plated, t=0.25mm 3. Spring Wire : 0.45mm Dia. Phosphor bronze with 6u gold plated . 4. Solder Pin : 0.4x0.4mm ,Phosphor bronze with Solder plated 5. Durability : 300 Mating cycles Min . E. PCB Layout Mounting Hole (Top View) Prepared :Luo Ming Li Checked by: Xu Wenbing Approved : Alexander Wu Drawing no.: Pulse Transformer REV.:A4 Date : 2001/08/07