SN74LV32A-EP QUADRUPLE 2-INPUT POSITIVE-OR GATE www.ti.com SCLS565B – JANUARY 2004 – REVISED JANUARY 2006 FEATURES • • • • • • • • • (1) Controlled Baseline – One Assembly/Test Site, One Fabrication Site Extended Temperature Performance of –55°C to 125°C Enhanced Diminishing Manufacturing Sources (DMS) Support Enhanced Product-Change Notification Qualification Pedigree (1) 2-V to 5.5-V VCC Operation Max tpd of 7.5 ns at 5 V Typical VOLP (Output Ground Bounce) <0.8 V at VCC = 3.3 V, TA = 25°C Typical VOHV (Output VOH Undershoot) >2.3 V at VCC = 3.3 V, TA = 25°C • • Supports Mixed-Mode Voltage Operation on All Ports Ioff Supports Partial-Power-Down Mode Operation PW PACKAGE (TOP VIEW) 1A 1B 1Y 2A 2B 2Y GND 1 14 2 13 3 12 4 11 5 10 6 9 7 8 VCC 4B 4A 4Y 3B 3A 3Y Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to, Highly Accelerated Stress Test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold compound life. Such qualification testing should not be viewed as justifying use of this component beyond specified performance and environmental limits. DESCRIPTION/ORDERING INFORMATION This quadruple 2-input positive-OR gate is designed for 2-V to 5.5-V VCC operation The SN74LV32A-EP performs the Boolean function Y + A ) B or Y + A • B in positive logic. This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down. ORDERING INFORMATION PACKAGE (1) TA ORDERABLE PART NUMBER TOP-SIDE MARKING –40°C to 105°C TSSOP – PW Tape and reel SN74LV32ATPWREP LV32AEP –55°C to 125°C TSSOP – PW Tape and reel SN74LV32AMPWREP LV32AEP (1) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. FUNCTION TABLE (EACH GATE) INPUTS A B OUTPUT Y H X H X H H L L L Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 2004–2006, Texas Instruments Incorporated On products compliant to MIL-PRF-38535, all parameters are tested unless otherwise noted. On all other products, production processing does not necessarily include testing of all parameters. SN74LV32A-EP QUADRUPLE 2-INPUT POSITIVE-OR GATE www.ti.com SCLS565B – JANUARY 2004 – REVISED JANUARY 2006 LOGIC DIAGRAM, EACH GATE (POSITIVE LOGIC) A Y B Absolute Maximum Ratings (1) over operating free-air temperature range (unless otherwise noted) VCC MIN MAX Supply voltage range –0.5 7 UNIT V range (2) VI Input voltage –0.5 7 V VO Voltage range applied to any output in the high-impedance or power-off state (2) –0.5 7 V VO Output voltage range (2) (3) –0.5 VCC + 0.5 IIK Input clamp current IOK IO –20 mA Output clamp current VO < 0 –50 mA Continuous output current VO = 0 to VCC ±25 mA ±50 mA 113 °C/W 150 °C Continuous current through VCC or GND impedance (4) θJA Package thermal Tstg Storage temperature range (1) (2) (3) (4) 2 V VI < 0 –65 Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. The input and output negative-voltage ratings may be exceeded if the input and output current ratings are observed. This value is limited to 5.5 V maximum. The package thermal impedance is calculated in accordance with JESD 51-7. SN74LV32A-EP QUADRUPLE 2-INPUT POSITIVE-OR GATE www.ti.com Recommended Operating Conditions SCLS565B – JANUARY 2004 – REVISED JANUARY 2006 (1) Supply voltage VCC VCC = 2 V High-level input voltage VIH MIN MAX 2 5.5 Low-level input voltage VI Input voltage VO Output voltage VCC = 2.3 V to 2.7 V VCC × 0.7 VCC = 3 V to 3.6 V VCC × 0.7 VCC = 4.5 V to 5.5 V VCC × 0.7 VCC = 2.3 V to 2.7 V VCC × 0.3 VCC = 3 V to 3.6 V VCC × 0.3 VCC × 0.3 5.5 0 VCC V –50 μA VCC = 2.3 V to 2.7 V VCC = 3 V to 3.6 V –6 Δt/Δv Input transition rise or fall rate 50 VCC = 2.3 V to 2.7 V 2 VCC = 3 V to 3.6 V 6 VCC = 4.5 V to 5.5 V 12 VCC = 2.3 V to 2.7 V 200 VCC = 3 V to 3.6 V 100 VCC = 4.5 V to 5.5 V TA (1) Operating free-air temperature mA –12 VCC = 2 V Low-level output current V –2 VCC = 4.5 V to 5.5 V IOL V 0 VCC = 2 V High-level output current V 0.5 VCC = 4.5 V to 5.5 V IOH V 1.5 VCC = 2 V VIL UNIT μA mA ns/V 20 SN74LV32AM –55 125 SN74LV32AT –40 105 °C All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004. 3 SN74LV32A-EP QUADRUPLE 2-INPUT POSITIVE-OR GATE www.ti.com SCLS565B – JANUARY 2004 – REVISED JANUARY 2006 Electrical Characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER VOH TEST CONDITIONS VCC 2 V to 5.5 V IOH = –2 mA 2.3 V IOH = –6 mA 3V 2.48 4.5 V 3.8 IOH = –12 mA VOL TYP MAX 2 V to 5.5 V V 0.1 IOL = 2 mA 2.3 V 0.4 IOL = 6 mA 3V 0.44 IOL = 12 mA 4.5 V 0.55 II VI = 5.5 V or GND VI = VCC or GND, Ioff VI or VO = 0 to 5.5 V UNIT VCC – 0.1 2 IOL = 50 μA ICC Ci MIN IOH = –50 μA V 0 to 5.5 V ±1 μA 5.5 V 20 μA 5 μA IO = 0 0 VI = VCC or GND 3.3 V 3.3 5V 3.3 pF Switching Characteristics over recommended operating free-air temperature range, VCC = 2.5 V ± 0.2 V (unless otherwise noted) (see Figure 1) PARAMETER FROM (INPUT) TO (OUTPUT) LOAD CAPACITANCE tpd A or B Y CL = 50 pF TA = 25°C MIN TYP MAX 9.6 16.2 MIN MAX 1 20 UNIT ns Switching Characteristics over recommended operating free-air temperature range, VCC = 3.3 V ± 0.3 V (unless otherwise noted) (see Figure 1) PARAMETER FROM (INPUT) TO (OUTPUT) LOAD CAPACITANCE tpd A or B Y CL = 50 pF TA = 25°C MIN TYP MAX 6.9 11.4 MIN MAX 1 13 UNIT ns Switching Characteristics over recommended operating free-air temperature range, VCC = 5 V ± 0.5 V (unless otherwise noted) (see Figure 1) 4 PARAMETER FROM (INPUT) TO (OUTPUT) LOAD CAPACITANCE tpd A or B Y CL = 50 pF TA = 25°C MIN TYP MAX 4.9 7.5 MIN MAX 1 8.5 UNIT ns SN74LV32A-EP QUADRUPLE 2-INPUT POSITIVE-OR GATE www.ti.com Noise Characteristics SCLS565B – JANUARY 2004 – REVISED JANUARY 2006 (1) VCC = 3.3 V, CL = 50 pF, TA = 25°C TYP MAX VOL(P) Quiet output, maximum dynamic VOL MIN 0.2 0.8 V VOL(V) Quiet output, minimum dynamic VOL –0.1 –0.8 V VOH(V) Quiet output, minimum dynamic VOH VIH(D) High-level dynamic input voltage VIL(D) Low-level dynamic input voltage (1) 3.1 UNIT V 2.31 V 0.99 V TYP UNIT Characteristics are for surface-mount packages only. Operating Characteristics TA = 25°C PARAMETER Cpd Power dissipation capacitance TEST CONDITIONS CL = 50 pF, f = 10 MHz VCC 3.3 V 9.5 5V 11.5 pF 5 SN74LV32A-EP QUADRUPLE 2-INPUT POSITIVE-OR GATE www.ti.com SCLS565B – JANUARY 2004 – REVISED JANUARY 2006 PARAMETER MEASUREMENT INFORMATION From Output Under Test Test Point RL = 1 kΩ From Output Under Test CL (see Note A) VCC S1 Open TEST GND CL (see Note A) LOAD CIRCUIT FOR TOTEM-POLE OUTPUTS 0V 50% VCC 50% VCC 0V Data Input VCC 0V tPHL Out-of-Phase Output 0V VOH 50% VCC VOL VOH 50% VCC VOL VOLTAGE WAVEFORMS PROPAGATION DELAY TIMES INVERTING AND NONINVERTING OUTPUTS 50% VCC tPZL tPLH 50% VCC VCC Output Control tPHL 50% VCC 50% VCC VOLTAGE WAVEFORMS SETUP AND HOLD TIMES 50% VCC tPLH VCC 50% VCC VOLTAGE WAVEFORMS PULSE DURATION 50% VCC th tsu VCC In-Phase Output VCC 50% VCC tw Input Open VCC GND VCC LOAD CIRCUIT FOR 3-STATE AND OPEN-DRAIN OUTPUTS Timing Input Input S1 tPLH/tPHL tPLZ/tPZL tPHZ/tPZH Open Drain Output Waveform 1 S1 at VCC (see Note B) 0V tPLZ 50% VCC ≈VCC VOL + 0.3 V VOL tPHZ tPZH Output Waveform 2 S1 at GND (see Note B) 50% VCC 50% VCC VOH − 0.3 V VOH ≈0 V VOLTAGE WAVEFORMS ENABLE AND DISABLE TIMES LOW- AND HIGH-LEVEL ENABLING NOTES: A. CL includes probe and jig capacitance. B. Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control. C. All input pulses are supplied by generators having the following characteristics: PRR ≤ 1 MHz, ZO = 50 Ω, tr ≤ 3 ns, tf ≤ 3 ns. D. The outputs are measured one at a time, with one input transition per measurement. E. tPLZ and tPHZ are the same as tdis. F. tPZL and tPZH are the same as ten. G. tPHL and tPLH are the same as tpd. H. All parameters and waveforms are not applicable to all devices. Figure 1. Load Circuits and Voltage Waveforms 6 PACKAGE OPTION ADDENDUM www.ti.com 18-Sep-2008 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty SN74LV32AMPWREP ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LV32ATPWREP ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM V62/04693-01XE ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM V62/04693-02XE ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Lead/Ball Finish MSL Peak Temp (3) (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. OTHER QUALIFIED VERSIONS OF SN74LV32A-EP : SN74LV32A • Catalog: • Automotive: SN74LV32A-Q1 NOTE: Qualified Version Definitions: - TI's standard catalog product • Catalog • Automotive - Q100 devices qualified for high-reliability automotive applications targeting zero defects Addendum-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant SN74LV32AMPWREP TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 SN74LV32ATPWREP TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) SN74LV32AMPWREP TSSOP PW 14 2000 367.0 367.0 35.0 SN74LV32ATPWREP TSSOP PW 14 2000 367.0 367.0 35.0 Pack Materials-Page 2 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46C and to discontinue any product or service per JESD48B. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such components to meet such requirements. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Mobile Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2012, Texas Instruments Incorporated