KBPC15005PT CHENMKO ENTERPRISE CO.,LTD THRU SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 50 - 1000 Volts CURRENT 15.0 Amperes KBPC1510PT FEATURES * * * * Superior thermal design 300 amperes surge rating 1/4" universal faston terminal Hole thru for # 8 screw MECHANICAL DATA Case: JEDEC KBPC-15 molded plastic Terminals: Plated leads solderable per MIL-STD-750, Method 2026 Mounting position: Any Polarity: Polarity symbols marked on body MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60 HZ, resistive or inductive load. For capacitive load, derate current by 20%. KBPC-15 MAXIMUM RATINGES ( At TA = 25oC unless otherwise noted ) SYMBOL KBPC1501PT KBPC15005PT KBPC1502PT KBPC1504PT KBPC1506PT KBPC1508PT KBPC1510PT UNITS Maximum Recurrent Peak Reverse Voltage RATINGS VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 Volts Maximum Average Forward Rectified Current at TC = 55oC Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Operating and Storage Temperature Range IO 15.0 Amps IFSM 300 Amps TJ,TSTG -55 to +150 o C ELECTRICAL CHARACTERISTICS ( At TA = 25oC unless otherwise noted ) CHARACTERISTICS SYMBOL Maximum Instantaneous Forward Voltage at 7.5 A DC Maximum Reverse Current at rated VF @ TA = 25oC KBPC1501PT KBPC15005PT KBPC1502PT KBPC1504PT KBPC1506PT KBPC1508PT KBPC1510PT UNITS 1.1 Volts 10 uAmps 0.5 mAmps IR DC blocking Voltage per element @ TC = 100oC 2001-6 20 15 10 Single Half Wave 60HZ Resistive or Inductive Load 5 0 0 25 50 75 100 125 150 175 200 PEAK FORWARD SURGE CURRENT, (A) AVERAGE FORWARD CURRENT, (A) FIG. 1 - TYPICAL FORWARD CURRENT DERATING CURVE 25 FIG. 2 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 350 300 8.3 ms Single Half Sine-Wave (JEDEC Method) 250 200 150 100 50 0 0 2 CASE TEMPERATURE, ( oC ) FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARCTERISTICS 6 8 10 20 40 60 80 100 FIG. 4 - TYPICAL REVERSE CHARACTERISTICS 10 INSTANTANEOUS REVERSE CURRENT, (uA) INSTANTANEOUS FORWARD CURRENT, (A) 100 4 NUMBER OF CYCLES AT 60HZ 10 TJ = 25oC 1.0 PULSE WIDTH=300uS 1% DUTY CYCLE 0.1 4 TJ = 100oC 1.0 0.4 0.1 .04 TJ = 25oC .01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 INSTANTANEOUS FORWARD VOLTAGE, (V) 1 20 40 60 .452 MAX. (11.5) AC KBPC-15 .582(14.8) .543(13.8) .033 x .250 (0.8 x 6.4) 140 HOLE FOR NO. 8 SCREW 1.181(30.0) 1.102(28.0) AC .673(17.1) 1.181(30.0) .633(16.1) 1.102(28.0) 120 .591 (15.0) MAX. 1.181(30.0) 1.102(28.0) HOLE FOR NO. 8 SCREW AC .732(18.6) .692(17.6) 100 .452 MAX. (11.5) .042(1.1) DIA. .039(1.0) TYP. 1.181(30.0) 1.102(28.0) .673(17.1) .633(16.1) 80 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) .732(18.6) .692(17.6) AC .732(18.6) .692(17.6) .468(11.9) .429(10.9) KBPC-15W