MP3505 RECTRON THRU SEMICONDUCTOR TECHNICAL SPECIFICATION MP3510 SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 35 Amperes FEATURES * * * * Superior thermal desing 300 amperes surge rating // 1/4 universal faston terminal Hole thru for # 10 screw MECHANICAL DATA * UL listed the recognized component directory, file #E94233 * Epoxy: Device has UL flammability classification 94V-O MP-35 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. MP-35W For capacitive load, derate current by 20%. MAXIMUM RATINGS (At T A = 25 oC unless otherwise noted) SYMBOL MP3505 MP351 MP352 MP354 MP356 MP358 Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 Maximum RMS Bridge Input Voltage VRMS 35 70 140 280 420 Maximum DC Blocking Voltage VDC 50 100 200 400 600 RATINGS o Maximum Average Forward Rectified Output Current at Tc = 55 C Peak Forward Surge Current 8.3 ms single half sine-wave MP3510 UNITS 1000 Volts 560 700 Volts 800 1000 Volts IO 35.0 Amps I FSM 400 Amps T J, T STG -55 to + 175 superimposed on rated load (JEDEC method) Operating and Storage Temperature Range 0 C ELECTRICAL CHARACTERISTICS (At TA = 25oC unless otherwise noted) CHARACTERISTICS SYMBOL Maximum Forward Voltage Drop per element at 17.5A DC Maximum Reverse Current at Rated @T A = 25 oC DC Blocking Voltage per element @T C = 100 oC NOTE: Suffix ”W” for wire type VF MP3505 MP351 MP352 MP354 MP356 MP358 MP3510 UNITS 1.1 Volts 10 uAmps 0.5 mAmps IR 2001-5 RATING AND CHARACTERISTIC CURVES ( MP3505 THRU MP3510 ) FIG. 2 - TYPICAL FORWARD CURRENT DERATING CURVE FIG. 1 - MAXIMUM NON-REPETITIVE FORWARD 400 300 200 100 0 40 30 20 FIG. 3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 100 10 TJ = 25 Pulse Width = 300us 1% Duty Cycle 1.0 .1 .01 1.2 1.3 .6 .7 .8 .9 1.0 1.1 INSTANTANEOUS FORWARD VOLTAGE, (V) Single Phase Half Wave 60Hz Indutive or Resistive Load 10 0 0 4 6 8 10 20 40 60 80100 NUMBER OF CYCLES AT 60Hz INSTANTANEOUS REVERSE CURRENT, (uA) 2 50 100 CASE TEMPERATURE, ( 1.0 TJ = 25 .1 .01 0 20 40 60 80 .32 x .252 (0.81 x 6.35) .673 (17.1) 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, ( % ) MAX. .311 (7.9) MIN. .787 (20.0) .043 (1.1) .039 (1.0) 1.142 (29) 1.102 (28) Hole for # 10 screw Min .469 (11.9) .429 (10.9) .583 (14.8) 1.142 (29) 1.102 (28) Hole for # 10 screw Min f.200 (5.08) .634 (16.1) 1.142 (29) 1.102 (28) .673 (17.1) .634 (16.1) 175 FIG. 4 - TYPICAL REVERSE CHARACTERISTICS .732 (18.6) .693 (17.6) .480 (12.2) .425 (10.8) 150 ) 10 Max. .311 (7.9) .693 (17.6) INSTANTANEOUS FORWARD CURRENT, (A) 1 50 .543 (13.8) .732 (18.6) .693 (17.6) MP-35 MP-35W RECTRON .200 (5.08) .142 (29.0) .102 (28.0) 8.3ms Single Half Sine-Wave (JEDEC Method) AVERAGE FORWARD CURRENT, (A) 500 .732 (18.6) PEAK FORWARD SURGE CURRENT, (A) SURGE CURRENT