CHONGQING PINGYANG ELECTRONICS CO.,LTD. KBL005/RS401 THRU KBL10/RS407 SINGLE-PHASE SILICON BRIDGE RECTIFIER VOLTAGE：50-1000V CURRENT：4.0A FEATURES KBL ·Ideal for printed circuit board ·Surge overload ratings-150 Amperes ·Molded structure .768(19.5) .728(18.5) .580(14.7) .540(13.7) + AC - .640(16.3) .600(15.2) .750 (19.0) .052(1.3) DIA. .048(1.2)TYP. MECHANICAL DATA .083 (2.1) ·Case: Molded plastic ·Epoxy: UL 94V-0 rate flame retardant ·Lead: MIL-STD- 202E, Method 208 guaranteed ·Polarity: Symbols molded or marked on body ·Mounting position: Any ·Weight: 4.8 grams .220(5.6) .180(4.6) MIN. .256(6.5) .236(6.0) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRONICAL CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwise specified. Single phase, half wave, 60Hz,resistive or inductive load. For capacitive load, derate current by 20%. KBL005 KBL01 KBL02 KBL04 KBL06 KBL08 KBL10 units SYMBOL RS401 RS402 RS403 RS404 RS405 RS406 RS407 Maximum Recurrent Peak Reverse Voltage Maximum RMS Bridge Input Voltage Maximum DC Blocking Voltage Maximum Average Forward rectified Output Current at TA=75°C Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rate load (JEDEC method) Maximum Forward Voltage Drop per element at 2.0A DC Maximum DC Reverse Current @ TA=25°C at Rated DC Blocking Voltage @ TA=100°C per element I2t Rating for Fusing (t<8.3ms) Typical Junction Capacitance (Note 1) Typical Thermal Resistance (Note 2) VRRM VRMS VDC 50 35 50 100 70 100 200 140 200 400 280 400 600 420 600 800 560 800 1000 700 1000 V V V Io 4.0 A IFSM 150 A VF 1.0 V IR 10 µA 500 I2t CJ RθJA 93 40 19 A2S pF °C/W Notes: 1.Measured at 1MHz and applied reverse voltage of 4.0 volts 2.Thermal Resistance from Junction to Ambientwith units mounted on 3.0×3.0×0.11”(7.5×7.5×0.3mm) AL piate １ PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn