CHONGQING PINGYANG ELECTRONICS CO.,LTD. RS501 THRU RS507 SINGLE-PHASE SILICON BRIDGE RECTIFIER VOLTAGE：50-1000V CURRENT：5.0A RS-5 FEATURES ·Ideal for printed circuit board ·Surge overload ratings-150 Amperes .188(4.8)x45 ° .855(21.7) .825(21) .825(21.0) .795(20.2) + AC 1.0 (25.4) .042(1.07) DIA. .038((0.97) TYP. MECHANICAL DATA .265(6.7) .245(6.2) ·Case: plastic encapsulation ·Epoxy: UL 94V-0 rate flame retardant ·Lead: MIL-STD- 202E, Method 208 guaranteed ·Polarity: As marked ·Mounting position: Any ·Weight: 2.74 grams MIN. .400 .300 .300 .365 .385 .285 .285 .345 (10.2) (9.8) (7.6) (7.6) (7.2) (7.2) (9.3) (8.8) .195(5.0) .180(4.6) 1.580(40.1) 1.550(39.4) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRONICAL CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwise specified. Single phase, half wave, 60Hz,resistive or inductive load. For capacitive load, derate current by 20%. SYMBOL RS501 RS502 RS503 RS504 RS505 RS506 RS507 units Maximum Recurrent Peak Reverse Voltage Maximum RMS Bridge Input Voltage Maximum DC Blocking Voltage Maximum Average Forward rectified Output Current at TA=75°C Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rate load (JEDEC method) Maximum Forward Voltage Drop per element at 2.5A DC Maximum DC Reverse Current @ TA=25°C at Rated DC Blocking Voltage @ TA=100°C per element I2t Rating for Fusing (t<8.3ms) Typical Junction Capacitance (Note 1) VRRM VRMS VDC 50 46 50 100 88 100 200 140 200 400 280 400 600 420 600 800 560 800 1000 700 1000 V V V Io 5.0 A IFSM 150 A VF 1.1 V IR 10 µA 500 2 It CJ 10 15 2 AS pF Notes: 1.Measured at 1MHz and applied reverse voltage of 4.0 volts 2.Thermal Resistance from Junction to Ambient and form junction to leadmounted on P.C.B.with 0.47×0.47”(12×12mm ) copper pads １ PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn