CHONGQING PINGYANG ELECTRONICS CO.,LTD. KBP005/RS201 THRU KBP10/RS207 SINGLE-PHASE SILICON BRIDGE RECTIFIER VOLTAGE:50-1000V CURRENT:2.0A RS-2 FEATURES ·Ideal for printed circuit board ·Surge overload ratings-50 Amperes .710(18.0) .670(17.0) .566(14.4) .528(13.4) .528(13.4) + AC - .488(12.4) .945 (24.0) .035(0.9) DIA. .028(0.7) TYP. MECHANICAL DATA .125 (3.2) ·Case: Molded plastic ·Epoxy: UL 94V-0 rate flame retardant ·Lead: MIL-STD- 202E, Method 208 guaranteed ·Polarity: As marked ·Mounting position: Any ·Weight: 2.74 grams .160(4.1) .140(3.6) MIN. .039 (1.0) .260(6.6) .240(6.1) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRONICAL CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwise specified. Single phase, half wave, 60Hz,resistive or inductive load. For capacitive load, derate current by 20%. SYMBOL Maximum Recurrent Peak Reverse Voltage Maximum RMS Bridge Input Voltage Maximum DC Blocking Voltage Maximum Average Forward rectified Output Current at TA=50°C Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rate load (JEDEC method) Maximum Forward Voltage Drop per element at 1.0A DC Maximum DC Reverse Current @ TA=25°C at Rated DC Blocking Voltage @ TA=100°C per element VRRM VRMS VDC KBP005 KBP01 KBP02 KBP04 KBP06 KBP08 KBP10 RS201 RS202 RS203 RS204 RS205 RS206 RS207 50 35 50 100 70 100 200 140 200 400 280 400 600 420 600 800 560 800 1000 700 1000 units V V V Io 2.0 A IFSM 50 A VF 1.0 V IR 10 µA 500 I2t 10 A2S I2t Rating for Fusing (t<8.3ms) CJ 15 pF Typical Junction Capacitance (Note 1) Notes: 1.Measured at 1MHz and applied reverse voltage of 4.0 volts 2.Thermal Resistance from Junction to Ambient and form junction to leadmounted on P.C.B.with 0.47×0.47”(12×12mm ) copper pads 1 PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn